xboxscene.org forums
OG Xbox Forums => Software Forums => Xbox Bioses => Topic started by: bucko on April 20, 2004, 12:42:00 AM
-
Gee check all solder connections and try searching and reading the pinned topics and tutorials.
-
-
No, the bootcd/rw don't work (this is the cd that I've used to put the Evox).
-
for ur info.... the 1.5 is a failed 1.4 mobo that didn't have the traces to power and ground made.... only a few were made...
i have one....
-
EmperorPsiblade how is a 1.5 a failed 1.4 the traces are there at least on mine its not connected to the mpcx chip with a solder ball so i dont think its a failed 1.4 i think it was done on purpose i might be wrong but that is what i think. It was removed the same way the lframe was when the 1.3 came out
-
NO. here's this guy's problem. Nobody flashed his chip. (or they accidently reflashed an original bios where his hacked bios had previously been <---- I highly doubt this because noobs never have a msbios in their bios directory) The chip came loose because either it's a pogo pin or d0 came off. Either way this is why he's getting the error screen. The retail bios boots and then either cannot unlock hard drive, or if his hard drive is locked then he named evox or some other dash to xboxdash.xbe and causes the bios to halt. He needs to check his connections or just reflash with a hacked bios.