| QUOTE (A1patriot @ Aug 23 2003, 08:25 AM) |
| For ppl like me who trashed their x2 lite chips flashing with 4978 bios (yeah, yeah sticks and stones) here is a fix I stumbled upon :- 1. Make a "Free-Xevox" xbox cd and load with x2 lite switched off. 2. It should freeze up ya box cos it's looking for the font hacks (which aren't there). 3. Switch ya chip back on and hit the eject button. 4. Should now reboot into 4978 bios. 5. Now reflash back to 4977 and next time read up b4 u flash (hehe) PS. did it twice to confirm it works, experiment with the above slighlty if it don't work 4 u. peace out |
| QUOTE (Xeero @ Aug 23 2003, 01:08 PM) |
| If it works, fantastic. But I guess I'm a little confused as to why that would force the MCPX to grab the full 1024K instead of 512K. |
| QUOTE (A1patriot @ Aug 23 2003, 01:25 PM) |
| For ppl like me who trashed their x2 lite chips flashing with 4978 bios (yeah, yeah sticks and stones) here is a fix I stumbled upon :- 1. Make a "Free-Xevox" xbox cd and load with x2 lite switched off. 2. It should freeze up ya box cos it's looking for the font hacks (which aren't there). 3. Switch ya chip back on and hit the eject button. 4. Should now reboot into 4978 bios. 5. Now reflash back to 4977 and next time read up b4 u flash (hehe) PS. did it twice to confirm it works, experiment with the above slighlty if it don't work 4 u. peace out |
| QUOTE (sektor3 @ Aug 23 2003, 02:51 PM) |
| so someone's going to refund me for my mod i had to buy last night? *sigh* |
| QUOTE ("maxconsole tech help information re: x2lite bad-flash on x2 4978") |
1) turn on xbox with the modchip disabled 2) when you enter the default ms dash switch the mod back on. 3) when you have did this open the dvd tray by pressing the eject button. 4) now close the tray again it should boot you to the XBOX Logo and MS one. 5) press eject again and this will fire up XBOX LOGO and xecuter logo. 6) evox should now boot, simply get ftp'd in and flash with an older working bios. hope this also helps people having problems. |
| QUOTE |
1) turn on xbox with the modchip disabled 2) when you enter the default ms dash switch the mod back on. 3) when you have did this open the dvd tray by pressing the eject button. 4) now close the tray again it should boot you to the XBOX Logo and MS one. 5) press eject again and this will fire up XBOX LOGO and xecuter logo. 6) evox should now boot, simply get ftp'd in and flash with an older working bios. |
| QUOTE (DjoeN @ Aug 24 2003, 03:27 AM) |
| *Offtopic* Now let's hurry and get a modchip for the Gamecube (héhé) |
| QUOTE (UnrealEureca @ Aug 23 2003, 11:26 PM) |
| i flashed my bios with a old version of evox i think it was 2.6 with evolution x now i get red and green lights then xbox turns off then back on if i disable the chip it boots to original msdash and i can play normal games my question is will this work for me to flash my chip with 4977 please let me know before i go and order the 20 dollar programmer |
| QUOTE (UnrealEureca @ Aug 24 2003, 12:12 AM) | ||||
ok so i need a programmer then cool thanks ill order one right now i dont have a extra chip to be able to swapflash it Thanks |
| QUOTE (Terrorbyte @ Aug 25 2003, 04:16 PM) |
| Anyone have an ETA on the "finalized" x2_4978 build? Lookin forward to the 512k version, small enough to fit on X2Lites (without having to reboot a few times). |
| QUOTE (wtaag @ Aug 27 2003, 03:39 AM) |
| Can you use this say on a cheapmod that had a bad flash via evox? |
| QUOTE (wtaag @ Aug 27 2003, 07:34 AM) |
| Im just looking for the easiest and fastest way to recover this flash. Since I do not have a cheapmod programmer... I can not just reprogram the chip. Also... Hotswaping will be a pain since my xbox install is a pinheader and the cheapmod has wires. Any ideas? |