xboxscene.org forums
OG Xbox Forums => Software Forums => Xbox Bioses => Topic started by: LordIcon on August 01, 2003, 12:04:00 PM
-
Delete this , Problem sovled.
I switched over to the Teams Assembly Debug Bios. Flashed to 3&4 ,installed XDK on Xbox , works like a charm..
thanx
Hi,
I have a little flashing problem here. I have an X2.2 Pro mod installed . I was not able to get it flashed through the LPT Port ( like many others as i saw in the team executer forum). mysticly ,after at least 5 flashing tries wich ended with a bad verification. i got the xbox to boot from one of the banks with no probs.
Then i checked out the Evox Flashing feature, which did a good job in flashing some ftped bioses in bank 1 and 2. So i thought i could trie to fill bank 3 and 4 with the Complex MS Debug Bios. it is 1MB but bank 1 and 2 are mirrored.
i Did according to the tutorial here at xbox-scene. started xbm1.1 loaded banks 1 and 2 with x2 4677 and evox on the other. Then i imported the debug bios image. xbm1.1 told me some about this beeing mirrored and that is would use bank 3 and 4 for it. Fine with me, thats what is wanted.
I saved that 1MB Bios file and ftped to the xbox. little reboot to make the Evox find the new file. then set all jumpers to off except no4, got to system/flash. and flashed the bios.
Everything ok so far. Bank 1 and 2 each boot like they should.
As soon as i try to boot from bank 3 or bank 3&4 the xbox does not start, it has some green-red flashing lights.
I did not copy the XDK Files to the Xbox, would that be nesscary to have it present the boot sceen ? i dont think so..
has anybody get the debug bios to work ??
should i trie to use the Team Assembly Version ?? ( is it XDK compatilbe ?)