xboxscene.org forums

OG Xbox Forums => Software Forums => Xbox Bioses => Topic started by: VOYAGERXP on July 09, 2003, 03:53:00 AM

Title: Flashing Bios
Post by: VOYAGERXP on July 09, 2003, 03:53:00 AM

I went to flash my X2 lite+ with flashx but it did not flash. The flashx menu came up and asked me to pick my bios and so i did and then said last chance press x to conferm. But did not go anywhere after i pressed x.

Title: Flashing Bios
Post by: trob on July 09, 2003, 05:48:00 AM

Your bios.bin file on your c drive is 512kb, correct?

Title: Flashing Bios
Post by: VOYAGERXP on July 09, 2003, 08:34:00 AM

what do ya mean 512k on c drive ? I thought because my chip had the bank jumper on that it was flashed with a 1mb bios and not 512k.

Title: Flashing Bios
Post by: silentkiller on July 09, 2003, 02:37:00 PM

512 to flash 1 bank, 1024 to flash both.  Bank selector just chooses which bank to boot from.

Title: Flashing Bios
Post by: VOYAGERXP on July 09, 2003, 05:18:00 PM

In drive c of my xbox is 1.00mb bios. That must mean that my xbox chip was flash across both banks and not 1 right? So it has to be flashed across both banks or i will have to take my xbox apart and change the jumper over. Am i right.

Title: Flashing Bios
Post by: Frag Daddy on July 09, 2003, 06:46:00 PM

Just leave the bios jumper on your chip if you want to flash the whole chip.  Use a 1 mb bios file.