xboxscene.org forums

OG Xbox Forums => Software Forums => Xbox Bioses => Topic started by: smdtherock on May 21, 2003, 05:44:00 PM

Title: Problems When I Take The Pin Off
Post by: smdtherock on May 21, 2003, 05:44:00 PM

hi i have an executer 2 lite and when i take off the bios pin off the chip it doesntstart up plz help...

Title: Problems When I Take The Pin Off
Post by: Lerxst on May 21, 2003, 07:17:00 PM

QUOTE

"It doesn't start up"

?

Does it give an error code?

~Lerxst

Title: Problems When I Take The Pin Off
Post by: smdtherock on May 22, 2003, 02:17:00 PM

well when i take off the bios jumper which it says is needed to be off to flash the bios when i press the power button it starts up and right a way shuts back down(NOTHING HAPPENS)
uhhh as for my specs i have:
Executer 2 lite, 30 gig hdd, newest evox, and my current bios version is executer II 1.947 i belive thnx for any help...

oh yeah and when i put the jumper back on it works fine.....

Title: Problems When I Take The Pin Off
Post by: Lerxst on May 22, 2003, 04:15:00 PM

Okay, this sounds fishy. So you say that when you remove the "flash protection jumper" - then press the power button, it powers up then completley powers down? Correct?

1) Which jumper (from left to right with prongs facing at you) did you remove?

2) Also, Is this the first time that this has happened, or something that just started?

3) Is your hard drive locked?


~Lerxst

Title: Problems When I Take The Pin Off
Post by: smdtherock on May 22, 2003, 04:44:00 PM

hmmm its the one all the way to the left.....it says bios next to it and im not sure it my hdd is locked i never did anything but use slayers and upgrade to a bigger hdd

Title: Problems When I Take The Pin Off
Post by: Lerxst on May 22, 2003, 05:14:00 PM

QUOTE (smdtherock @ May 22 2003, 07:44 PM)

hmmm its the one all the way to the left.....it says bios next to it and im not sure it my hdd is locked i never did anything but use slayers and upgrade to a bigger hdd

Okay, don't remove that one, remove the one all the way to the right that says "Flash" then try to boot. Let me know...

~Lerxst

Title: Problems When I Take The Pin Off
Post by: smdtherock on May 23, 2003, 05:22:00 AM

ok sweet the flash label was hidden by the ribbon ok so now where can i download X-ecuter2 v4976.02 because i have evox d.6 and i jus was looking at the comparison and its so much better....

Title: Problems When I Take The Pin Off
Post by: Krill123 on May 23, 2003, 05:51:00 AM

Don't ask for THAT.. It's illegal!   What's wrong with you?????

What you SHOULD be doing though is thank Lerxst for helping you solve your problem!!!!

Ah fuck.. I'll do it for you...

------------

Lerxst buddy..
Thank you for solving this guys problem!  You're great!

------------

Title: Problems When I Take The Pin Off
Post by: smdtherock on May 23, 2003, 05:55:00 AM

(gets on knees) thnx man u helped out a lot

Title: Problems When I Take The Pin Off
Post by: Krill123 on May 23, 2003, 06:02:00 AM

Title: Problems When I Take The Pin Off
Post by: Lerxst on May 23, 2003, 08:09:00 AM

~Lerxst