xboxscene.org forums

OG Xbox Forums => Modchip Forums => TSOP flashing => Topic started by: hawkolugy on August 07, 2004, 05:11:00 PM

Title: Soldering Help!
Post by: hawkolugy on August 07, 2004, 05:11:00 PM

I tried to solder the points to enable tsop flashing and for some reason it would always say that my points werent soldered so i gave up and took off the solder and i think that the point came off with it <_< . Now the xbox boots twice but then frags. I NEED HELP. is there someway to fix bad soldering?  :blink:
Thanks :beer:
Oh and bye the way this is my bros box and he will kick my @$$ if i dont fix so please help!!

This post has been edited by hawkolugy on Aug 8 2004, 12:13 AM

Title: Soldering Help!
Post by: ftothe3 on August 07, 2004, 07:40:00 PM

you are fucked. your mobo is toast.

Title: Soldering Help!
Post by: acid8x on August 07, 2004, 09:29:00 PM

Sorry to say that but many chance you'll hjave to buy a new motherboard with a new hard drive

Title: Soldering Help!
Post by: DevoDave on August 07, 2004, 10:51:00 PM

Any competent modder should be able to repair your traces as long as the damage is not too severe.  Probably 10-20 minutes work.

Title: Soldering Help!
Post by: evanmugford on August 08, 2004, 12:19:00 PM

sounds like you have a splash on your board somewhere    take a close look might be east to fix     if you damaged the traces   as log as you didn't bypass any componentys the box should work fine   so i dout its the trace thats causeing the prob      proble a short somewhere