xboxscene.org forums
OG Xbox Forums => Modchip Forums => TSOP flashing => Topic started by: tigerito on January 21, 2004, 04:18:00 PM
-
I don't want to screw these up so before i do them i want to know what i have to do. I'm familiar with flashing the TSOP but what speccial about 1.5. What bios do i need to use and is it only the same two sets of points that i have to solder? Can anybody direct me to the right TUT. Thanks. <
-
4979 will do same points, need to learn linux <
-
you use the X2 4979/4980 or the EvoX M7 bios for 1.5's.
Points to use are the same top two points from 1.2's and on.
If it's a winbond chip, use raincoat or highway's flashpack with eurasia. <
-
I assume the eurasia flash disc thing should work fine?
Also I saw mentioned in one of those tuts about connecting the points with a pencil? Has this been successful for anyone? hell it worked on the old duron overclocking.. <
-
Pencil is not reliable and definately not recommended.
And yes, the eurasia flash disc would work fine but the box would have to be softmodded with a font hack in order for it to run <
-
Forget the pencil. Go to an auto parts store and buy a rear-window-defogger repair kit. It will come with a small bottle of conductive paint. Using a toothpick, apply a small bit of paint between the points in the two places, wait for it to try, and you're in business. I've done 3 boxes using this method - it works great and is cheap ($6 for the repair kit ;)
-Zak
<
-
I wanted to do a pencil :( :( :(
I think I might buy myself a conductive pen, could come in handy for other projects as well. <
-
thanks for you help gentlemen. <