Post by: JayDee on December 30, 2003, 01:26:00 PM
Forgot to scrape one 2 days ago and i was 100% sure that the solderpoints where solid but still got the chip not writable bullshit.
Took me a good 45 minutes and 5 or 6 solder and desolderings befor i remebered that i hadn´t scraped the points.
After that it took the normal 5 minutes to flash, install and screw the box together.
I wouldn´t say that i am a expert solderer but rather experianced (do ps2´s without to much problem) but i still fucked up for the better part of an hour.
Post by: wilcd on January 02, 2004, 12:01:00 PM
...... i think points are OK ,,,why?? just simply cause i cant undestad why i have never fails when i get a xbox with different tsop flashchip ,,,it always works ,,,,but if the chip is w49f020t-90b no way to make it.........Post by: DaShiZNiT on January 02, 2004, 03:25:00 PM
Post by: JJay on January 03, 2004, 05:26:00 AM
Post by: Pizza Pizz on January 03, 2004, 07:41:00 AM
but I always use a fiberglass pen to ensure any solder points tsop or lpc or homebrew mod are nice n clean whilst the soldering iron is warming up
Post by: FOSI on January 04, 2004, 07:10:00 AM
i flashed a winbond with newest raincoat and CVS raincoat.conf tonight.. it said ALL OK no errors but the box doenst start anymore!!!!
Post by: LiGhTfasT on January 04, 2004, 11:49:00 AM
| QUOTE |
| BusyBox v0.60.5-xbox (2003.02.17-17:02+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands. sh: can't access tty; job control turned off Get more Linux at http://xbox-linux.sf.net/. # cd ../../media/E/UDATA/4541000d/000000000000/raincoat # ./raincoat -p bios.bin raincoat Flasher 0.501 Apr 14 2003 [email protected] http://xbox-linux.sf.net Reading in ./raincoat.conf... 15 flash types read UNKNOWN DEVICE Read Only??? manf=0x09, dev=0x00 Try adding the device ID to your raincoat.conf # |
Resoldered those 2 points on the top about 3 times now and get the same, using the latest raincoat as well
is it definatly the 2 solder points causing this? because as far i can see there connected i also checked with a multimeter
Post by: subteN on January 04, 2004, 01:18:00 PM
people check this post i did:
http://forums.xbox-s...T&f=43&t=150175
Greetings,
subteN
Post by: subteN on January 04, 2004, 01:56:00 PM
| QUOTE (subteN @ Jan 4 2004, 11:18 PM) |
| THIS IS THE PROBLEM . AND HOW TO FIX IT!!!! people check this post i did: http://forums.xbox-s...T&f=43&t=150175 Greetings, subteN |
v1.5 Xbox TSOP FLASH info!!!!
This is probably the reason ALL THOSE v1.5 boxxes are getting FLASHED BAD....!
[check the link]
the v1.5 has NO ground and 3,3Volt on the LPC
i am going to test it RIGHT NOW,
on a v1.5 with WINBOND W49F020T-90B
and the FOCUS chip...
......am going back to the v1.5 box, and will post the results when i have fixxed it, or give it up!
Greetings,
subteN
Post by: polarz on January 04, 2004, 03:12:00 PM
| QUOTE |
| You only need 2 for ALL xbox versions. You only increase your chances of screwing up by trying to mess with more bottom points. |
Don't forget about the v1.1 box with a Sharp tsop which needs a wire bridge on the bottom. Search if you want some more info on the Sharp tsop
Post by: upup on January 04, 2004, 06:35:00 PM
Post by: subteN on January 05, 2004, 12:28:00 PM
| QUOTE (LiGhTfasT @ Jan 5 2004, 01:03 AM) |
| You tried it yet? |
.....am just out of bed.....probably didn't had to smoke that last joint.....
....am going to do it RIGHT NOW.......
...the iron is allready heating up.....
later...
subteN
Post by: subteN on January 05, 2004, 01:10:00 PM
| QUOTE (LiGhTfasT @ Jan 5 2004, 10:32 PM) |
never mind i got it sorted, it was the soldering.. even had the little rersistor come off and had to resolder that in place.... man those little resistors are small |
....what little resistor....?
the one by: R7D2 or R7D9 or C7D3
subteN
Post by: subteN on January 05, 2004, 03:20:00 PM
| QUOTE (LiGhTfasT @ Jan 6 2004, 01:02 AM) |
R7D2, man was that small... what happened was i let my mate do it as its his xbox and i thought he'd be fine with it so left him to it... looked at it and he covered R7D2 in solder  hehe thought it was knackered but it still booted so thought i'd try and fix it, the resistor got suck on the soldering iron when i tried removing some of the solder but managed to find it again and stick it back in... could'nt belive it when i tried a multimeter on it, it still worked  smallest thing i've had to solder, i had blobs of solder bigger than it |
...Cool!!!!!
so now you probably have the feeling you can SOLDER ANYTHING!!!!!
i didn't have mine back to life, did solder that GROUND and 3,3 volt....
but the Chameleon doesn't want to boot....
i think i will get everything disconnected AGAIN......and try it all over AGAIN....
....AFTER i have had another joint to get relaxed, from all the mini, macro, midget soldering skills and techniques.....
please keep us all posted about your progress, Bro!!!!
if we stick together, we can maybe find ALL the answers to get them ALL FIXXED!!!!
Greetings,
subteN
Post by: Zedek on January 06, 2004, 03:31:00 AM
| QUOTE (xizor @ Jan 6 2004, 01:39 AM) |
| I got a 1.5 to flash, but something went wrong. when I rebooted, it does the on off thing three times then flashes red and green. Any ideas? Isn't that the bad bios error? I used the same bios I have used on the last 5 boxes I moded. but this is the first 1.5 I have done. |
What bios did you use? If you used anything other than X2 4979 or M7 or the newer x2 4980, that's why it's fragging.....The other bios's don't have focus encoder support.
Looks like it's a 29 wire mod for you!
I repair tsop's if you don't feel up to it
Post by: tflegend on January 06, 2004, 03:44:00 AM
Post by: Exobex on January 06, 2004, 09:19:00 AM
| QUOTE (insanim8er @ Dec 27 2003, 03:19 PM) |
| Edit your raincoat.conf file to look like this: Flash = 0x04BA,"ALX2+ R3 FLASH",0x40000 Flash = 0x01a4,"AMD - Am29F040B",0x80000 Flash = 0x01d5,"AMD - Am29F080B",0x100000 Flash = 0x01da,"AMD - Am29LV800B",0x100000 Flash = 0x015b,"AMD - Am29LV800B",0x100000 Flash = 0x378c,"AMIC - A29002",0x40000 Flash = 0x04d5,"FUJITSU - MBM29F080A",0x100000 Flash = 0x04a4,"FUJITSU - MBM29F040C",0x80000 Flash = 0xadb0,"Hynix - HY29F002",0x40000 Flash = 0xadd5,"Hynix - HY29F080",0x100000 Flash = 0x20f1,"ST - M29F080A",0x100000 Flash = 0xc236,"MACRONIX - MX29F022NTPC",0x40000 Flash = 0xbf61,"SST - SST49LF020",0x40000 Flash = 0x20b0,"ST - 29F002",0x40000 Flash = 0x20f1,"ST - M29F080A",0x100000 Flash = 0x89a6,"Sharp - LHF08CH1",0x100000 Flash = 0xda0b,"Winbond - W49F002U",0x40000 Flash = 0xda8c,"Winbond - W49F020",0x40000 Flash = 0x0900,"Winbond - W49F020T",0x40000 then try to flash - or you can bridge all 3 sets of points on the MB - 2 sets on top 1 set on bottom, edit your evox.ini with that info and it should flash. |
That last line...
Flash = 0x0900,"Winbond - W49F020T",0x40000
is wrong. VERY wrong. There is no such manufacturer as 0x09, this comes up BECAUSE YOUR SOLDERING IS FUCKED.
If you succeed in flashing whatever device is there (in other words your RD jumper is bad but your WR jumper is good), I feel sorry for you, because you've probably just reprogrammed your Xbox as a doorstop.
If you don't want to risk it, REMOVE THAT LINE!
Post by: Zedek on January 06, 2004, 10:24:00 AM
Post by: Exobex on January 07, 2004, 07:21:00 AM
| QUOTE (Zedek @ Jan 6 2004, 07:24 PM) |
| Tell em how it is Exobex..they don't listen to the rest of us |
Post by: kcgames on January 07, 2004, 06:36:00 PM
Post by: Exobex on January 12, 2004, 08:01:00 AM
| QUOTE (Geremia @ Jan 7 2004, 09:06 PM) |
| Nothing happens if 0x0900 is in evox.ini, simple the erase process fails because without #OE and #WE drived correctly, the flash understand only the read command. |
Are you positive about this?
Would you be prepared to put your money where your mouth is, and try flashing a machine with the WE jumper soldered (therefore enabling write access to the chip) and the RD jumper DEsoldered (so raincoat can't identify it correctly), whilst keeping that line in your raincoat.conf?
'cos I wouldn't!
Post by: j8994 on March 27, 2006, 10:30:00 PM
PLEASE HELP
PS SORRY FOR CAPS KEYBOARD SCREWED NEED TO GET NEW ONE
Post by: lordvader129 on March 28, 2006, 08:30:00 AM
QUOTE(j8994 @ Mar 27 2006, 11:37 PM) 
I NEED THE FLASH CODES FOR ALL WINBOND CHIPS ,
PLEASE HELP
PS SORRY FOR CAPS KEYBOARD SCREWED NEED TO GET NEW ONE
under pinned tutorials theres a list of TSOP flash definitons
Post by: dring219 on September 18, 2006, 07:58:00 PM
Post by: lordvader129 on September 18, 2006, 10:27:00 PM
QUOTE(dring219 @ Sep 18 2006, 10:05 PM)
bump
any particular reason?
Post by: wilcd on December 27, 2003, 03:43:00 AM
king regards
asap
Post by: PSXCopyCat on December 27, 2003, 06:00:00 AM
Post by: wilcd on December 27, 2003, 06:30:00 AM
curiosly RAINCOAT identifies the flash as W49F020 and not as W49F020T-90B ...evox makes same result ,,,both freeze saying "Erasing....."
Post by: insanim8er on December 27, 2003, 06:19:00 AM
Flash = 0x04BA,"ALX2+ R3 FLASH",0x40000
Flash = 0x01a4,"AMD - Am29F040B",0x80000
Flash = 0x01d5,"AMD - Am29F080B",0x100000
Flash = 0x01da,"AMD - Am29LV800B",0x100000
Flash = 0x015b,"AMD - Am29LV800B",0x100000
Flash = 0x378c,"AMIC - A29002",0x40000
Flash = 0x04d5,"FUJITSU - MBM29F080A",0x100000
Flash = 0x04a4,"FUJITSU - MBM29F040C",0x80000
Flash = 0xadb0,"Hynix - HY29F002",0x40000
Flash = 0xadd5,"Hynix - HY29F080",0x100000
Flash = 0x20f1,"ST - M29F080A",0x100000
Flash = 0xc236,"MACRONIX - MX29F022NTPC",0x40000
Flash = 0xbf61,"SST - SST49LF020",0x40000
Flash = 0x20b0,"ST - 29F002",0x40000
Flash = 0x20f1,"ST - M29F080A",0x100000
Flash = 0x89a6,"Sharp - LHF08CH1",0x100000
Flash = 0xda0b,"Winbond - W49F002U",0x40000
Flash = 0xda8c,"Winbond - W49F020",0x40000
Flash = 0x0900,"Winbond - W49F020T",0x40000
then try to flash - or you can bridge all 3 sets of points on the MB - 2 sets on top 1 set on bottom, edit your evox.ini with that info and it should flash.
Post by: wilcd on December 28, 2003, 03:32:00 AM
will try evox later but i think i won't be lucky
Post by: A@ron on December 28, 2003, 06:38:00 AM
A@ron
Post by: lordvader129 on December 28, 2003, 10:05:00 AM
did you say you bridged 2 points on teh bottom? cuz both points you need to bridge are on the top of the motherboard
Post by: iLLNESS on December 28, 2003, 08:59:00 AM
most people say its only 2 because the 3rd works only if uve soldered one of the 2 bad but i think thats bs.. im not an amateur solderer and i had to do 3 points
it all depends on the chip ur using and winbonds u do
Post by: PsiDOC on December 28, 2003, 12:19:00 PM
Detects, then freezes on erase = Naffed up Write enable jumpers!
Nuff Said.
Psi
Post by: RaysMD on December 28, 2003, 02:37:00 PM
| QUOTE |
| Flash = 0x0900,"Winbond - W49F020T",0x40000 |
MAKE sure your soldering is good. You only need to solder the top 2 points. Flashing winbond chips only works with raincoat, no evoX.
rays
Post by: ftothe3 on December 28, 2003, 03:03:00 PM
Post by: Reznik Akime on December 28, 2003, 05:29:00 PM
Post by: A@ron on December 28, 2003, 08:02:00 PM
A@ron
Post by: Reznik Akime on December 28, 2003, 08:18:00 PM
Post by: Zedek on December 29, 2003, 05:11:00 AM
Post by: ftothe3 on December 29, 2003, 09:11:00 AM
Post by: Reznik Akime on December 29, 2003, 10:03:00 AM
Post by: Reznik Akime on December 29, 2003, 11:43:00 AM
Post by: bradthemac on December 29, 2003, 01:35:00 PM
Post by: phikapjames on December 29, 2003, 07:13:00 PM
| QUOTE |
| If you are using the 007 raincoat package that is on #xbins you have a raincoat version that is too old. I ran into problems using raincoat on an xbox that had a winbond chip on it. I checked and re-checked my solder points and nothing was wrong but i kept on getting an error message that was saying it could not erase or flash my chip. All you have to do is replace the file called raincoat in the 007 memory card directory and replace it with a newer version of raincoat (.501) |
I just did a 1.5 with the winbond chip using the 007_tsop_flash_kit_1_0_alpha6 that is on xbins and it worked just fine without needing any replacement files or a configuration file (besides just needing a bios.bin added). Just a note that I used all three soldering points (always works the best for me that way).
| QUOTE |
| yeah, 0x0900 means the chip isnt write enabled |
This is partially wrong. If you try flashing the winbond chip using evox when there is no bios configuration for the winbond chip in the evox.ini then it will display this. It is still correct though that even after you add the bios configuration for the winbond chip, evox will NOT be able to flash it and just freeze.