Post by: christineyoung on March 12, 2005, 08:59:00 AM
Post by: ski-mask on March 12, 2005, 10:15:00 AM
Post by: appleguru on March 12, 2005, 10:21:00 AM
QUOTE(luser @ Mar 12 2005, 11:23 AM)
I'm not sure if XeniumOS can dump the eeprom to the Xbox HD? I don't remember. If not, EvoX dash can do that. After that, transfer the eeprom file to your computer using FTP or SMB or whatever.
-
Title: Problem With Xenium Instalation
Post by: neuromancer_nyc on March 12, 2005, 04:11:00 PM
-
That same thing happened to me when my hdd died. Could it be that?
-
Title: Problem With Xenium Instalation
Post by: japh on March 12, 2005, 04:29:00 PM
-
Is he using the solderless adapter? The same thing happened to me, and I just opened up my Xbox and re-tightened the screw down that holds the solderless adapter to the motherboard.
Sometimes it "springs up" a bit and loses contact with the LPC points.
However, my Xbox was flashing red and green, not just green so it could be something else as well.
I'd definitely check and make sure the solderless adapter is making solid contact with the LPC points and that the D0 wire is still in the hole before messing around with the EEProm.
-
Title: Problem With Xenium Instalation
Post by: jlkirby77 on March 12, 2005, 08:31:00 PM
-
i know ive checked everything and i am completely stumped. i modded it for him and it worked completely fine but than one day he brought it over and it was completely screwed up i am using soderless but i dont think thats it im almost wondering if the lpc ports are bad or if something bridged cause im completely stumped as to what is wrong i took the modchjip out and it still wouldnt get video even to tell me something was wrong so i have no idea what is up with it
-
Title: Problem With Xenium Instalation
Post by: acemilo on March 13, 2005, 12:58:00 AM
-
Take everything out and see if it boots. If it does then the adapter wasnt alligned. If it goes to solid red and no video, your eeprom is hosed.
-
Title: Problem With Xenium Instalation
Post by: jlkirby77 on March 13, 2005, 01:16:00 PM
-
i think he has a different version of xbox than i. any ideas on where i could get an eeprom i think he has version 1.1 cause the do point is the same as my 1.0
Post by: neuromancer_nyc on March 12, 2005, 04:11:00 PM
Post by: japh on March 12, 2005, 04:29:00 PM
Sometimes it "springs up" a bit and loses contact with the LPC points.
However, my Xbox was flashing red and green, not just green so it could be something else as well.
I'd definitely check and make sure the solderless adapter is making solid contact with the LPC points and that the D0 wire is still in the hole before messing around with the EEProm.
Post by: jlkirby77 on March 12, 2005, 08:31:00 PM
Post by: acemilo on March 13, 2005, 12:58:00 AM
Post by: jlkirby77 on March 13, 2005, 01:16:00 PM