xboxscene.org forums

OG Xbox Forums => Modchip Forums => Team DMS Chips (X-B.I.T) => Topic started by: yahoo on September 13, 2005, 10:41:00 AM

Title: Problem With Xbit 1.5 & Xbox 1.4
Post by: yahoo on September 13, 2005, 10:41:00 AM

First of all sorry for my bad english but i'm italian  

I installed a Xbit on a Xbox v1.4.

I haven't done nothing yet: no bios flash, ecc.

When I start the Xbox the console turn on and off for 2 or 3 times and then it starts with green/red eject led (black screen).  

I also have changed Xbit with another one but the problem is the same  

Removing Xbit the Xbox works correctly.  

Where is the problem???  


P.S.: installation by wires soldering

Title: Problem With Xbit 1.5 & Xbox 1.4
Post by: Silentscream__ on September 13, 2005, 01:49:00 PM

Problem is there is no bios for the xbox to boot from - flash the chip with the latest X2 bios from xbins.

Title: Problem With Xbit 1.5 & Xbox 1.4
Post by: yahoo on September 13, 2005, 03:04:00 PM

I tried to flash the chip but the program doesn't work!!!  

I use WinXP

Title: Problem With Xbit 1.5 & Xbox 1.4
Post by: Silentscream__ on September 14, 2005, 09:05:00 AM

http://forums.xbox-scene.com/index.php?showtopic=389982

Title: Problem With Xbit 1.5 & Xbox 1.4
Post by: yahoo on September 15, 2005, 04:56:00 AM

Nothing  

I don't know what i have to do with this chip!!!  

Title: Problem With Xbit 1.5 & Xbox 1.4
Post by: SaCrifice on September 24, 2005, 06:21:00 AM

Yeah, you need a bios in your chip. its quite simpel really. Just connect your usb cable to your chip and the other end of the cable in your PC. Try to use a old PC with the old USB-ports cause the 2.0 ports is often no good.
Use a prog named X-BIT and choose a bios bank. Its a small and very easy prog to use and understand.
FLASH the chip and restart.   Oh, and of course you will need a bios to flash :-). Its easy to find.
After flashing the chip, just use a bootdisk and boot from it. There are a few to choose from so no problem with that.

...........thats it.