-
Hi,
I have tweaked a little the official "install-ppc64-minimal-2006.1.iso" gentoo iso so it work on the 360. This livecd is a minimal one, no x-server and you still need a serial adapter (could change soon since it use the readcd binary from felix, if someone manage to put this in a modded shader). I'm still working on some more cool stuff actually.
The ftp where the file is hosted allow 50 users so if you can make some mirrors ..
You will find more info on the free60.org website.
ftp://linux360:[email protected]/
http://www.free60.org/
Here is the readme :
CODE
gentoo-xenon-minimal-2006.1
***************************
This is a liveCD for Linux on the Xbox 360. It is based on the official gentoo
minimal installer named install-ppc64-minimal-2006.1.iso with a few changes to
boot on the Xbox 360 (codename xenon).
Currently, Samsung drives aren't supported, but it will work if you can load the
enable0800 ISO just before loading the cdreader binary via serial.
How does it work ?
==================
Burn gentoo-xenon-minimal-2006.1.iso.
Upload the cdreader binary via serial, this will open the xbox dvd drive.
Put the gentoo-xenon-minimal-2006.1 CD in the drive.
cdreader will automatically start the xell bootloader located at lba 0x20 on
this cd and boot the Linux Kernel.
Where to find more info on Linux for Xbox 360 :
===============================================
http://www.free60.org/
Free60 is a project towards porting GNU/Linux, BSD, Darwin and related
open-source operating systems to the Microsoft Xbox 360 video game console.
Thanks to :
===========
- Felix alias tmbinc, coded the cdreader binary and xell bootloader, without him,
nothing would be possible.
- Stonersmurf, did the ISO mastering and gave his help and support on a lot of
things, many thanks to him.
- The free60.org team.
Cheers,
Cpasjuste.
This post has been edited by Cpas: Mar 29 2007, 11:32 PM
-
now if i only had the right kernal.....
-
And here is the new shader patcher so you can use the live CD without serial adapter :
ftp://linux360:[email protected]_xell.zip
Greats goes to xorloser.
This post has been edited by Cpas: Mar 30 2007, 02:09 AM
-
omg..wow...thank you
dont feel like burning another kk disc..burned 4 or so already w/ diff shaders so looks like ill keep using the serial adapter
and i will def mirror it once it finishes
and thanks for the pm stonersmurrf
-
I plan on getting an unupdated 360 for this. =] I hope my friend still has it he said he did a lil while ago.
-
Wow, it's nice to see a patch like this to ease the installation. Shouldn't be long before we see major things.
-
(IMG:style_emoticons/default/ohmy.gif) (IMG:style_emoticons/default/pop.gif)
-
Will this work with a samsung drive? I heard someone in xboxhacker got linux working using the enable800 iso.
This post has been edited by xlokix: Mar 30 2007, 04:19 AM
-
QUOTE(xlokix @ Mar 29 2007, 11:12 PM)
Will this work with a samsung drive? I heard someone in xboxhacker got linux working using the enable800 iso.
Nevermind found the answer. lol
"Currently, Samsung drives aren't supported, but it will work if you can load the
enable0800 ISO just before loading the cdreader binary via serial."
-
Thank you so much cpas.
-
how do u check to know what kernal u have
-
seem to have discovered a few small things worth noting
i am connected via serial
i am using the original (crwl360) patched kk disc
dvd drive is flashed w/ 5.2 xtreme
when i receive the "xe" prompt i insert the enable0800.iso cd...the drive goes in to mode b...makes the ticking noise
i send the readcd.bin file...it sends ok..but the code is not executed
i have to send the original (crwl360) hello.bin file and then the readcd code is exectuded
the kernel loads and then hangs @ the second ata1 line...is it looking for a hdd? (duh..i just thought of that..guess ill connect a sata drive)
CODE
[ 121.543823] ata1: SATA max UDMA/133 cmd 0xD0000800834E2200 ctl 0xD0000800834E
220A bmdma 0xD0000800834E4220 irq 36
[ 121.562936] scsi0 : sata_xenon
[ 122.036495] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
This post has been edited by k0mpresd: Mar 30 2007, 05:29 AM
-
QUOTE(xlokix @ Mar 30 2007, 04:39 AM)
Nevermind found the answer. lol
"Currently, Samsung drives aren't supported, but it will work if you can load the
enable0800 ISO just before loading the cdreader binary via serial."
Are you sure that that isn't just for hacking the beast via serial? This new exploit's nfo mentions nothing about different drives. It simply says (paraphrase) burn it, it ejects, stick in the live cd.
-
Is cdreader binary included in "gentoo-xenon-minimal-2006.1.tgz"?
-
If someones wondering too: Yes it is.
-
k0mpresd, can you try to send the xell binary instead the cdreader to see if your sammy drive work. I hope i didnt made a mistake, someone said me it work with enable 0800 and xell.
-
i will do it when i get home from work cpas
im late as it is
-
first of all nice work to all involved (IMG:style_emoticons/default/biggrin.gif)
I have patched the game and burnt the gentoo live cd, everything seems to work great, you can see the penguins on the top of the screen and linux loading up then when it seems like its done it says thank you for using Gentoo Linux and does nothing else. If i leav it like that after 5 mins or more the screen goes black....
Am I missing something????
-
QUOTE(k0mpresd @ Mar 30 2007, 06:34 AM)
seem to have discovered a few small things worth noting
i am connected via serial
i am using the original (crwl360) patched kk disc
dvd drive is flashed w/ 5.2 xtreme
when i receive the "xe" prompt i insert the enable0800.iso cd...the drive goes in to mode b...makes the ticking noise
i send the readcd.bin file...it sends ok..but the code is not executed
i have to send the original (crwl360) hello.bin file and then the readcd code is exectuded
the kernel loads and then hangs @ the second ata1 line...is it looking for a hdd? (duh..i just thought of that..guess ill connect a sata drive)
CODE
[ 121.543823] ata1: SATA max UDMA/133 cmd 0xD0000800834E2200 ctl 0xD0000800834E
220A bmdma 0xD0000800834E4220 irq 36
[ 121.562936] scsi0 : sata_xenon
[ 122.036495] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
I'm have the EXACT same problem. The only difference is that I inserted the enable-0800 disc before kingkong.
Edit: And I have A orginal HDD connected. I've also tried sending xell directly, but the result is same. Next thing would be to unconnect the dvd after xell is loaded and use tftp.
-
I guess the Samsung User should, for now - for Linux, flash back to Xtreme 3.3.
That should work then, shouldn't it?
Of course that would mean that they should perhaps better stay away from XBOX
live. But hey, they want to keep their kernel version, so they can't play live any-
way...
-
the issue when the readcd code doesn't execute is that it probably misses the 16 'x' at the end - the hello.bin has them. so just add xxxxxxxxxxxxxxxx to your readcd.bin (be sure to edit as binary, of course), and it should work.
-
QUOTE(Marcian @ Mar 30 2007, 05:01 PM)
I guess the Samsung User should, for now - for Linux, flash back to Xtreme 3.3.
That should work then, shouldn't it?
Of course that would mean that they should perhaps better stay away from XBOX
live. But hey, they want to keep their kernel version, so they can't play live any-
way...
Reprogrammed with willem programmer back to xtreme 1, xtreme 2 and the latest without the need for a enable800 disc but sadly i just get a black screen.
Did i f**k up or is this normal ?
What needs to be altered to bring the samsung the state it can read the Livecd ?
-
Where did you get a blackscreen ?
Can you load games with the xtrem 1 or 2 (to be sure that the flash is correct) ?
Ps : Like tmbinc said, i forget to include the X at the end of the readcd binary :x, so "echo "xxxxxxxxxxxxxxxxxxxxxxxxx" >> ./readcd.bin" should make the work.
This post has been edited by Cpas: Mar 30 2007, 06:32 PM
-
QUOTE(Cpas @ Mar 30 2007, 05:58 PM)
Where did you get a blackscreen ?
I dont actually get to boot in to gentoo, it goes all through the process of loading up with all the ok's to the right of the screen but it dont load up a desktop or anything. I just get the writting at the bottom saying if you have any problems using gentoo then report it the exact same way or something to that effect, then at the very bottom it says thank you for using gentoo..
I still have the penguins at the top of the screen. It then sits there then after 5-10 mins not actually timed it to be honest then the screen goes black....
Not sure why i dont seem to be able to fully boot it unless im totally missing something.
I thought i would at least have a desktop lol.....
-
QUOTE(Cpas @ Mar 30 2007, 06:51 AM)
k0mpresd, can you try to send the xell binary instead the cdreader to see if your sammy drive work. I hope i didnt made a mistake, someone said me it work with enable 0800 and xell.
this did not work either
it still hangs in the same spot
it might be worth mentioning that i only leave the enable0800 cd in just until i hear the mode b "ticking" then i send the xell_rom.bin (from your site cpas ) and insert the gentoo cd @ the same time
if i leave the 0800 cd in for too long the system crashes and the xell loader isnt executed of course
will you please post or pm me the link to the xell loader w/ the delay for the enable0800? you posted it for warp on xboxhacker but neither one of my home computers will connect to the site ?
edit: i got it to work but will you still please send me the delayed xell? the time it takes the drive to go in to mode b is about the exact same time the box takes to crash
-
I was asking to XBHpringle but anyway (IMG:style_emoticons/default/tongue.gif)
You have not read a lot, there is no desktop on the minimal live cd. When you get the message its done loading (IMG:style_emoticons/default/smile.gif)
I think you are using a compenant cable, and we forget to say that there is no fullscreen with component output so some part of the screen are missing. If you have a vga cable use it you will see the command prompt.
@k0mpresd, sorry but you do it the right way, its my mistake someone said me that it was working but this person must have forgot to say that it hang. I think for now we need to wait XBHpringle answer to see how it goes with a firmware that dont have the firmguard, or wait c4eva to make a compatible firmware.
This post has been edited by Cpas: Mar 30 2007, 07:11 PM
-
Have a few questions about the Live disc what packages are included gui support* and can this live cd be installed to the hdd later. Thank you
-
QUOTE(Cpas @ Mar 30 2007, 01:38 PM)
@k0mpresd, sorry but you do it the right way, its my mistake someone said me that it was working but this person must have forgot to say that it hang. I think for now we need to wait XBHpringle answer to see how it goes with a firmware that dont have the firmguard, or wait c4eva to make a compatible firmware.
cpas: please read the edit @ the bottom of my previous post
oh..and do you know of any reason why crosstool would not install correctly? the install just stops part way through...some of the powerpc64 files are in /opt/crosstool and others are left in /home/.../crosstool ??
-
my bad bad link:
http://www.wired.com/gadgets/mac/commentar...c/2005/08/68501
-
I can't believe how fast the 360 is becoming unraveled.
Many thanks to those responsible.
-
This one need the serial to choose cd or tftp, so you can choose the delay. Say me if it work all the time with samy.
http://mydedibox.homelinux.com/downloads/x...l_choice.tar.gz
-
And this one seems to work with samsung drives, need to be burned to a dvd, and seems to be done by c4eva : ftp://linux360:[email protected] .
Dunno if it work.
-
Hah, laughs at samsung owners. I'm sure it is just a matter of time untill it will work on the samsung drive anyway.....
-
Ok, I haven't seen this covered anywhere... do you need a HDD for this? I just picked up a pre-own 360 today, had one of the old kernels (2xxx) and a Hitachi DVD drive. No HDD was included, I figure it will be easy enough to get one once the 120's hit. Have updated it to the correct kernel for the exploit but still need to get in there and flash the DVD for media checks.
-Whoopin'
-
QUOTE(Cpas @ Mar 31 2007, 12:34 AM)
And this one seems to work with samsung drives, need to be burned to a dvd, and seems to be done by c4eva :
ftp://linux360:[email protected] .
Dunno if it work.
Seems not working, dont waste dual dvd for now...
-
QUOTE(capboy210 @ Mar 30 2007, 06:59 PM)
Hah, laughs at samsung owners. I'm sure it is just a matter of time untill it will work on the samsung drive anyway.....
mine works
its just kind of moody and takes 3 discs to accomplish instead of 2
-
QUOTE(k0mpresd @ Mar 30 2007, 07:37 PM)
this did not work either
it still hangs in the same spot
it might be worth mentioning that i only leave the enable0800 cd in just until i hear the mode b "ticking" then i send the xell_rom.bin (from your site cpas (IMG:
style_emoticons/default/wink.gif) ) and insert the gentoo cd @ the same time
if i leave the 0800 cd in for too long the system crashes and the xell loader isnt executed of course
will you please post or pm me the link to the xell loader w/ the delay for the enable0800? you posted it for warp on xboxhacker but neither one of my home computers will connect to the site ?
edit: i got it to work (IMG:
style_emoticons/default/smile.gif) but will you still please send me the delayed xell? the time it takes the drive to go in to mode b is about the exact same time the box takes to crash
What's your md5 of "Enable0800.iso"? What media are you using, cd-r/rw dvd-r/rw?
-
nvm, got it working, but it's a lottery every time.
Now it stops at: "Freeing unused kernel memory"
-
QUOTE(kalle_19 @ Mar 31 2007, 07:16 AM)
nvm, got it working, but it's a lottery every time.
Now it stops at: "Freeing unused kernel memory"
lottery is a good way to put it
mine stopped in the same spot as well
-
QUOTE(Cpas @ Mar 30 2007, 06:34 PM)
And this one seems to work with samsung drives, need to be burned to a dvd, and seems to be done by c4eva :
ftp://linux360:[email protected] .
Dunno if it work.
not sure why it needs to be burned to a dual layer ?
i burned this one to a cd
sent xell_rom.bin via serial and it hangs in the same spot..
QUOTE
[ 92.661818] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
so i would say confirmed not working
i will boot back to linux and try the other link you posted
-
Sorry i'm late (IMG:style_emoticons/default/tongue.gif)
Confiming both xtreme 1 and 2 not working..
i just rushed trough the thread... i posted this in the kingkong exploit thread :
QUOTE
I'm looking intoo it....
i'm thinking about making a hardware switch for 2 different flashes,
flash nr.1 with a xtreme firmware to load the KK disc
flash nr.2 with a 0800 firmware to load the Livecd
In other words... removing a part from the xtreme firmware and switching to nr.2 just before the tray is popped to load the Livecd.
Who knows maybe it works
Or.. using two drives and use a simple SATA switch to switch between te xtreme and 0800 drive.
OOO fun things to do
Will post results this afternoon or night.. i'm kinda fckd from some btch aching my head
-
it seems a lot easier to just buy a hitachi drve
-
not sure how much more testing i can do
it seems my 2nd mobo has died a 0102 death
-
QUOTE(k0mpresd @ Mar 31 2007, 12:41 PM)
not sure how much more testing i can do
it seems my 2nd mobo has died a 0102 death
heatgun'ed and back to working..wonder how long it will last
-
Hi ive been loking at the samsung dvd drive problem and think i have came up with a solution.
put a 0800 enable disc and live cd on 1 disc.
the drive reads a certain sector and if that sector has a certain code it turns to 0800 mode.
why not just make the live cd and patch it so it is also an unlock disc.
(hope the sectors dont cross)
Do you think it is possible???
-
QUOTE(noonespecial @ Mar 30 2007, 08:58 AM)
first of all nice work to all involved
I have patched the game and burnt the gentoo live cd, everything seems to work great, you can see the penguins on the top of the screen and linux loading up then when it seems like its done it says thank you for using Gentoo Linux and does nothing else. If i leav it like that after 5 mins or more the screen goes black....
Am I missing something????
QUOTE(noonespecial @ Mar 30 2007, 12:11 PM)
I dont actually get to boot in to gentoo, it goes all through the process of loading up with all the ok's to the right of the screen but it dont load up a desktop or anything. I just get the writting at the bottom saying if you have any problems using gentoo then report it the exact same way or something to that effect, then at the very bottom it says thank you for using gentoo..
I still have the penguins at the top of the screen. It then sits there then after 5-10 mins not actually timed it to be honest then the screen goes black....
Not sure why i dont seem to be able to fully boot it unless im totally missing something.
I thought i would at least have a desktop lol.....
Kernal: 4532
ODD: Hitachi 47dj + xtreme 2.2
Works perfect. Really interesting stuff. I got the linux kernal to boot with the modified king kong iso + shader.bin. And from what i'm reading above this minimal version does include a GUI. I'm not good with linux but I just plugged in my USB keyboard and tried punching in commands but just kept getting bad command. Keyboard works perfect! The screenshots of Linux of the 360 are displaying it with the GUI so is there any way I could add it to the live cd?
Congrats and kudos to all the people that made the "impossible" "possible"
-
or even if someone adds a wait period to the shader file.
so the code delays for say 30 secs befor loading from the disc
I cant edit my posts??? wonder why
-
QUOTE(dolqube @ Mar 31 2007, 03:59 PM)
I cant edit my posts??? wonder why
"Members' only have a 15 minute window.
-
QUOTE(dolqube @ Mar 31 2007, 03:59 PM)
or even if someone adds a wait period to the shader file.
so the code delays for say 30 secs befor loading from the disc
I cant edit my posts??? wonder why
send the modded xell loader via serial
it has a delay because it waits for an input from the user to select tftp or cd
This post has been edited by k0mpresd: Mar 31 2007, 10:28 PM
-
java script:emoticon(':D', 'smid_5')
(IMG:style_emoticons/default/biggrin.gif) Thanks for the hard work guys works great .
-
Cpas: Any chance you will be releasing a bigger livecd with X-Terminal in the near future?
Any chance of using a usb-stick as hdd yet?
Oh, and again, thanks for the great work cpas
-
Great, a new live cd
With gnome desktop, gonna try this as soon as i get home....
"This liveCD is build with the new xenosfb driver so it have a full
gnome desktop. It also contains the powerpc64 toolchain for
developers."
-
New Live CD!!! Gnome desktop, burning it now...
-
QUOTE(jxoxn21 @ Apr 1 2007, 04:56 PM)
New Live CD!!! Gnome desktop, burning it now...
Where abouts did you find this live cd?
Edit - nevermind, downloading now!
-
The post just above this one on this forum ...
This post has been edited by Cpas: Apr 1 2007, 06:41 PM
-
It works flawless. My only question is I don't have an HD TV any reason why (or way to fix) it's almost like the desktop is too big for my tv and i can't see the sides/top/bottom. I'm assuming it's just this or VGA? Anyone have this problem and/or a fix for this?
-
i've been watching this forum and I havent seen ANY updates. Was this a useless exploit? Anyone know another forum where they're making progress with anything?
-
QUOTE(jxoxn21 @ Apr 2 2007, 03:14 AM)
It works flawless. My only question is I don't have an HD TV any reason why (or way to fix) it's almost like the desktop is too big for my tv and i can't see the sides/top/bottom. I'm assuming it's just this or VGA? Anyone have this problem and/or a fix for this?
Yes, you need a HDTV or a monitor.
QUOTE(jxoxn21 @ Apr 30 2007, 03:06 AM)
i've been watching this forum and I havent seen ANY updates. Was this a useless exploit? Anyone know another forum where they're making progress with anything?
http://www.free60.org and the #free60 irc channel. Useless? My 360 is my desktop computer now days.
Edit: Have you read the pinned http://forums.xbox-scene.com/index.php?showtopic=595902 and http://forums.xbox-scene.com/index.php?showtopic=595543 ?
This post has been edited by burgerbee: Apr 30 2007, 10:27 AM
-
QUOTE(jxoxn21 @ Apr 29 2007, 08:06 PM)
i've been watching this forum and I havent seen ANY updates. Was this a useless exploit? Anyone know another forum where they're making progress with anything?
Yeah, as burgerbee was pointing out, I think most of us are running Ubuntu now instead, at least I am. Running it off the HDD beats a Live disc any day
Also the minimal doesn't have a desktop and requires a serial port to use, so a lil dated now that we can do it all from disc.
-
I only want to backup the CPU key, ect..., what I am looking for in a "minimal" linux is no need for keyboard, ect, just load kk exploit, put in linux disc, linux is loaded and gets all the keys, dumps, ect and puts them on either the HD or a USB keydrive without any user interface via keyboard or any nonsense. Is there anything close to this?
-
QUOTE(gnutellafan @ Sep 23 2007, 11:19 PM)
I only want to backup the CPU key, ect..., what I am looking for in a "minimal" linux is no need for keyboard, ect, just load kk exploit, put in linux disc, linux is loaded and gets all the keys, dumps, ect and puts them on either the HD or a USB keydrive without any user interface via keyboard or any nonsense. Is there anything close to this?
http://arisme.free.fr/Xbox/Fuse360/
read there...