xboxscene.org forums

Xbox360 Forums => Xbox360 Hardware Forums => Xbox360 Audio/Video Technical => Topic started by: brandogg on November 08, 2008, 09:43:00 AM

Title: E74 Error Fixed But 2 Days Later Video Problem?
Post by: brandogg on November 08, 2008, 09:43:00 AM

It's the same thing as E74, or rather you'll often get this if your console does boot, and E74 when it doesn't. Your problem is basically still there, it's your scaler.

Title: E74 Error Fixed But 2 Days Later Video Problem?
Post by: modderguy791 on November 08, 2008, 09:49:00 AM

Brandoggs right, Do Wilhelm's heatgunning method to your scaler chip and it should work just fine. Ive done the same with great results. While your at it, heatgun your GPU just in case.

Title: E74 Error Fixed But 2 Days Later Video Problem?
Post by: 360lossless on November 09, 2008, 09:57:00 AM

Hiya Guys, a update on that.

Done the heat gund trick as per Wilheims instructions and tested again after it had cooled down, error still present therefore re-done it as dont think did it long enough really.

Nothing popped, burnt or left the board, left to cool then give that a whirl but now 3 RROD.

Have therefore removed the X-Clamps previously fitted when the E74 & 1 Red light deveoped and tried again to see what result happened and still 3 RROD.

Not really sure where to go from here (Maybe Argos lol).