Post by: Pacotera on April 19, 2010, 12:22:00 AM
This is what i did (and you should do but remember you need the files from the SAME MOTHERBOARD as your x360!)
I have a Jasper 16mb with XBR installed:
- First i booted into xell/xellous (with eject) and copied my CPU KEY
- Executed flash360 with a pendrive connected and made a full backup of my XBR3 nand
- Using 360 Flash tool already configured with my own CPU KEY and 1BL key (google for 1BL key) open the image.
- Extract SMC and Keyvault (just click on the extract button and select those)
- You will get 4 files. Rename KV_dec.bin to KV.bin and SMC_dec.bin to SMC.bin.
- Copy those files to the freeboot folder "DATA"
- Following freeboot's readme copy all files from 9199.zip to "DATA" folder aswell
- Now you will need the files below from a donor nand. Thanks to Skevus for his files (extracted from his jasper 16mb 7xxx backup).
- crl.bin
- crl.bin.meta
- extended.bin
- extended.bin.meta
- odd.bin
- odd.bin.meta
- secdata.bin
- secdata.bin.meta
- smc_config.bin
- After that run the following command on cmd:
ibuild.exe c freeBOOT -c [console] -d data\ -p [cpu key] -b [1BL key] bin\image.bin bin\fuses.bin
- A image.bin file will be created on "BIN" folder. Rename it to updflash.bin and copy to the root of your usb drive.
- Using flash360 flash the file to your x360 (i received a "not zeropaired image" error but ignored and all went fine)
- Thats it!
Please try and post back it it worked ok. I tested with 0.032 release of freeboot. If anything goes wrong you can always flash your XBR backup using LPT/USB
This post has been edited by Pacotera: Apr 19 2010, 08:01 AM
Post by: Neptune on April 19, 2010, 12:23:00 AM
Post by: whackawookie on April 19, 2010, 08:48:00 AM
QUOTE(dakaku @ Apr 19 2010, 02:36 PM) 
Could some1 please send me these from a Jasper 256, maybe 512 works too.
Thanks in advance.
- crl.bin
- crl.bin.meta
- extended.bin
- extended.bin.meta
- odd.bin
- odd.bin.meta
- secdata.bin
- secdata.bin.meta
- smc_config.bin
i got 512 but from 7363. up to you
Post by: dakaku on April 19, 2010, 08:54:00 AM
Edit: Well i have a full dump, but from my 6712 (which has no smc_config.bin ? At least i cant extract it with 360 flash tool).
Im just trying to go around the update (resistor removed).
Post by: whackawookie on April 19, 2010, 09:11:00 AM
QUOTE(dakaku @ Apr 19 2010, 02:54 PM)
ill give it a try
Edit: Well i have a full dump, but from my 6712 (which has no smc_config.bin ? At least i cant extract it with 360 flash tool).
Im just trying to go around the update (resistor removed).
check your pm's and let me know how everything goes
Post by: dakaku on April 19, 2010, 10:23:00 AM
Post by: Skevus on April 19, 2010, 10:29:00 AM
QUOTE(dakaku @ Apr 19 2010, 06:23 PM)
Unfortunatly it didnt work, thanks anyway.
Did your 360 ever work???
smc_config.bin is esential and very Consol specific....
P.S you get your smc_config.bin by extracting your original Dump with ibuild witch is included in FreeBoot 0.032...
Post by: dakaku on April 19, 2010, 10:35:00 AM
(i used the command from the readme)
QUOTE
ERROR: Data in block 0, page 0, plane 0 is corrupted.
ERROR: Unhandled exception.
ERROR: Unhandled exception.
Uhm block 0,page 0... ? Is this the date ? Maybe i changed it and forgot to rechange, its 2004-2007.
Edit: changed back to -2008 and now i get
QUOTE
ERROR: Data in block 47, page 50, plane 0 is corrupted.
ERROR: Unhandled exception.
ERROR: Unhandled exception.
Well, i guess ill just rewrite it, solder r3t6 and update to 7371
QUOTE
Did your 360 ever work
Yes. With xell0.1 ,xbr1,2,3 :-)
Post by: whackawookie on April 19, 2010, 10:38:00 AM
QUOTE(dakaku @ Apr 19 2010, 04:35 PM)
ibuild shows a error message, when i try to run it with my 6712 image
(i used the command from the readme)
sorry man. what kind of error does ibuild show when you try to extract
Post by: radoman on April 19, 2010, 02:08:00 PM
I tried this and a few other methods that i figured out. It only works on 1 or 2 xboxes that i tried it on. The rest get christmas lights, rrod or e52 errors.
This is because the ldv values from the orig must match the freeboot image. Ive tried changing them via flashtool. Doesnt work.
Post by: dakaku on April 19, 2010, 02:22:00 PM
I tried it a couple more times, but i either get E72,E79 or no vid at all with green lights.
Went back to xbr3 now... unfortunatly i only have 1 backup of my original nand left, which seems to be corrupted plus:
I dont feel like soldering to those spots right now.
Post by: ewok666 on April 19, 2010, 07:24:00 PM
I have a Jasper 512MB and my original NAND dump is 7363. It's currently runing XBR3. Ibuild extrakts all files from the original nand without any errors. I also used 360 flash tool 0.92 to extract KV.BIN and I'm planning to get SMC.BIN from the XBR3 image I flashed.
The KV_DEC.BIN (16384 bytes from 360 flash tool) and the KV.BIN (16368 bytes from ibuild) are the same EXCEPT for the first 16bytes which are missing from the KV.BIN that ibuild extrakted.
These are the file sizes I got from ibuild and the SMC BIN from 360 flash tool:
2,528 crl.bin
4 crl.bin.meta
16,368 extended.bin
4 extended.bin.meta
16,368 kv.bin
64 odd.bin
4 odd.bin.meta
1,024 secdata.bin
4 secdata.bin.meta
12,288 SMC.bin
131,072 smc_config.bin
Is this normal? Can I use the files that ibuild extracted and the smc_dec.bin from 360 flash tool?
TIA
Post by: Stonerman023 on April 20, 2010, 02:18:00 AM
QUOTE(ewok666 @ Apr 20 2010, 03:24 AM)
The KV_DEC.BIN (16384 bytes from 360 flash tool) and the KV.BIN (16368 bytes from ibuild) are the same EXCEPT for the first 16bytes which are missing from the KV.BIN that ibuild extrakted.
This is my problem exactly, I followed the tut but can´t continue because ibuild won´t let me build the image with an oversized kv.bin. I tried removing 16 bytes of 00´s, but ibuild then crashes..? and it crashes when i remove the first 16 bytes too..
Running win7 x64
Post by: cocker80 on April 20, 2010, 02:40:00 AM
QUOTE
The KV_DEC.BIN (16384 bytes from 360 flash tool) and the KV.BIN (16368 bytes from ibuild) are the same EXCEPT for the first 16bytes which are missing from the KV.BIN that ibuild extrakted.
I was gettting the same error on my xenon, if you remove the first 16bytes from you kv.bin it should work.
If anyone has the files for a 256mb jasper can you send the to me as i have lost my orginal nand dump.
If anyone needs the files for the xenon i have uploaded them here...
http://filejumbo.com...5CEAD4B6E99602C
Cheers.
Post by: cocker80 on April 20, 2010, 05:59:00 AM
QUOTE(Stonerman023 @ Apr 20 2010, 11:29 AM)
Just added a dual boot with xp32, just to see if it was my win7 64 that made trouble..
But Ibuild still crashes when I give the command
"ibuild.exe c freeBOOT -c xenon -d data\ -p CPU -b 1BL bin\image.bin bin\fuses.bin"
Whats going on..?
do you have the vc++ redistributable installed? Download it from here... http://www.microsoft...;displaylang=en
Post by: Stonerman023 on April 20, 2010, 08:30:00 AM
Is there a sign of progress when it´s working correctly?
Since there´s no new image in /bin/ I´m quite sure something isn´t as it should.
I´ll keep at it. thanks.
EDIT: There´s something weird with my original dumps ( I do have them) because I just built a freeboot image from the backup I used as a donor, and that seems to hold up ok..
I have 5 dumps from this problematic box, running 3 of them through Nandcompare v1.2 reconstruct I get the message "All blocks were found matching in at least 2 nand images. Save reconstructed nand?" which results in "0 unrecoverable block(s) found." I remember doing that for my XBR image, and that worked out fine.
This seems a bit more picky though..
Post by: ewok666 on April 20, 2010, 05:51:00 PM
QUOTE(cocker80 @ Apr 20 2010, 09:40 AM)
I was gettting the same error on my xenon, if you remove the first 16bytes from you kv.bin it should work.
If anyone has the files for a 256mb jasper can you send the to me as i have lost my orginal nand dump.
If anyone needs the files for the xenon i have uploaded them here...
http://filejumbo.com...5CEAD4B6E99602C
Cheers.
I did that. Once the first 16 byte have been removed correctly(!), the kv.bin's are identical and the image builds fine. However, I'm still unclear whether the smc_dec.bin from the xbreboot image can be used.
If the flashed image fails to boot, can I use Xellous to load linux and re-flash with a working image?
Post by: george241312 on April 20, 2010, 08:36:00 PM
Post by: cocker80 on April 21, 2010, 01:29:00 AM
QUOTE(ewok666 @ Apr 21 2010, 12:51 AM)
I did that. Once the first 16 byte have been removed correctly(!), the kv.bin's are identical and the image builds fine. However, I'm still unclear whether the smc_dec.bin from the xbreboot image can be used.
If the flashed image fails to boot, can I use Xellous to load linux and re-flash with a working image?
I used the smc_dec.bin renamed to smc.bin from my xbr image and it worked fine. If it does fail you can always use your lpt/usb to reflash your xbr image.
Post by: jedivoodoo on April 21, 2010, 11:59:00 AM
Also, is this method recommended? I see conflicting posts here and on other boards.
Post by: dustin6908 on April 21, 2010, 03:41:00 PM
QUOTE(jedivoodoo @ Apr 21 2010, 06:59 PM)
Would anybody happen to have the files for a Zephyr? I'd really appreciate it if they were uploaded somewhere. I got a donor NAND from my friend but it has bad blocks and I can't extract the files I need in 360 Flash Tool.
Also, is this method recommended? I see conflicting posts here and on other boards.
same i dont have org nand i bought mine online, didnt recive org nand bkup
pm link if do please
i wanna do update to my jtag box so i can transfer content between my jtag and live box with jus a flash drive.
Post by: Faluke on April 21, 2010, 09:20:00 PM
Had to give my boy D-Will some love! Jazz in 6! Jazz in 6!
Post by: fire2050 on April 21, 2010, 11:34:00 PM
edit: or can i use those files posted above? I have dumped my current nand with flash360
Post by: ewok666 on April 22, 2010, 02:12:00 AM
QUOTE(ewok666 @ Apr 20 2010, 02:24 AM)
It looks simple enough but I've got a few questions ;-)
I have a Jasper 512MB and my original NAND dump is 7363. It's currently runing XBR3. Ibuild extrakts all files from the original nand without any errors. I also used 360 flash tool 0.92 to extract KV.BIN and I'm planning to get SMC.BIN from the XBR3 image I flashed.
The KV_DEC.BIN (16384 bytes from 360 flash tool) and the KV.BIN (16368 bytes from ibuild) are the same EXCEPT for the first 16bytes which are missing from the KV.BIN that ibuild extrakted.
These are the file sizes I got from ibuild and the SMC BIN from 360 flash tool:
2,528 crl.bin
4 crl.bin.meta
16,368 extended.bin
4 extended.bin.meta
16,368 kv.bin
64 odd.bin
4 odd.bin.meta
1,024 secdata.bin
4 secdata.bin.meta
12,288 SMC.bin
131,072 smc_config.bin
Is this normal? Can I use the files that ibuild extracted and the smc_dec.bin from 360 flash tool?
TIA
The above worked fine. I removed the first 16 bytes in the KV.BIN so both were identical then created and flashed the image. All working well. Thanks for the instructions!
Post by: garus on April 22, 2010, 02:27:00 AM
I haven't flashed it yet, but image was created successfully 
Post by: relaxxx on April 22, 2010, 11:05:00 AM
I can hardly believe it! After giving my freeboot frustrations a rest I decided to try again and I had to delete the first 16 bytes from my KV.bin for ibuild to work. Used Flash360 and I was completely expecting to spend the next 45 min reflashing XBR through my LPT cable and swoosh, green lights.
This was on a Xenon with XBR3 bin, no orig.bin used. SMC_DEC and KV_DEC extracted right from XBR bin.
Follow exactly what first post says, delete 16 bytes from KV if ibuild complains, actually works!
Post by: relaxxx on April 22, 2010, 12:30:00 PM
I downloaded a free one called HxD.
After you run HxD, open your KV.bin file you created and highligt the first row of code. Each row of code is 16bytes (32 hexadecimal characters grouped in 2s). Hit delete, it will warn you that the file size will change, then just save and exit.
Post by: relaxxx on April 22, 2010, 03:56:00 PM
This time I'm using nandpro to flash another xenon and I've got error 300 from block 385 to the end, 3ff.
It seems to boot up anyway so I guess this is all normal. I wonder if next time I can just stop nandpro after Bl 385 and save some time?
Post by: Looouky on April 22, 2010, 03:59:00 PM
the last part of the nand is called the spare area and it is there for bad blocks. It should be 32 blocks long, so 84000 bytes, or from block 3df to 3ff.
Post by: Pacotera on April 22, 2010, 10:36:00 PM
He made a fulldump and emailed my the dump + his cpukey
Created a freeboot 0032 image with my jasper files (had to delete first 16 bytes from the kv) and emailed him back
working fine after full flash on flash360
Post by: barbarus on April 22, 2010, 11:54:00 PM
- crl.bin
- crl.bin.meta
- extended.bin
- extended.bin.meta
- odd.bin
- odd.bin.meta
- secdata.bin
- secdata.bin.meta
- smc_config.bin
for a falcon 16mb PAL?
thanks in advance
Post by: Faluke on April 23, 2010, 08:05:00 AM
Post by: Kamse on April 24, 2010, 03:49:00 AM
QUOTE(barbarus @ Apr 23 2010, 07:54 AM)
anyone have the file [...] for a falcon 16mb PAL?
thanks in advance
thanks in advance
I do but which cb (mine is 5770 by the way...) ?
Post by: duhh on April 24, 2010, 07:09:00 PM
QUOTE(Pacotera @ Apr 23 2010, 05:36 AM)
Just helped a friend that was using xbr3 on a jasper
He made a fulldump and emailed my the dump + his cpukey
Created a freeboot 0032 image with my jasper files (had to delete first 16 bytes from the kv) and emailed him back
working fine after full flash on flash360
Hey, can you clarify something. When you said he made a full backup, are you speaking of a full original backup from premod, or a full backup from xbr3?
I followed a guide instructing me to do the old only backup first 2 mb method, long short short I have a working xbr3, but ended up without a full original nand backup.
Post by: Faluke on April 24, 2010, 08:41:00 PM
QUOTE(Faluke @ Apr 23 2010, 06:05 AM)
ok so I got freeboot flashed and all is working except xbla games in freestyle dash. For some reason they won't play. I can play them inside the nxe just fine but not in freestyle dash. Weird.
Anyone else see this same problem? Can only run xbla games from nxe for some reason. Do I need to repatch them all now that I have a new kernel?
Post by: duhh on April 24, 2010, 10:16:00 PM
Post by: relaxxx on April 25, 2010, 07:01:00 AM
Post by: charon99 on April 25, 2010, 10:55:00 AM
cHarOn
Update: Ok found it out already config.bin is not compatible, but if you extract your sbr nand backup with ifconfig then you will get the Smc_Config.bin file
Post by: iwanttheagrocrag on April 25, 2010, 03:30:00 PM
Post by: duhh on April 27, 2010, 09:18:00 PM
QUOTE(Faluke @ Apr 25 2010, 05:10 PM)
That's what this whole thread is about dude. Did you even read the first post?
To clarify on my late night ramblings, I meant without any original dump or donor nands. Perhaps it contains donor nand files in the background and I don't know, but freeboot toolbox maker is magic
Fed it a key, and it build a new image for my box, no hassles, works great (aside from xvid)
Post by: Pacotera on April 28, 2010, 07:20:00 AM
QUOTE(duhh @ Apr 28 2010, 04:18 AM)
To clarify on my late night ramblings, I meant without any original dump or donor nands. Perhaps it contains donor nand files in the background and I don't know, but freeboot toolbox maker is magic
Fed it a key, and it build a new image for my box, no hassles, works great (aside from xvid)yes, the donor files are packed on the exe
Post by: Martinchris23 on April 28, 2010, 08:25:00 AM
Post by: Faluke on April 30, 2010, 12:50:00 PM
http://forums.xbox-s...p;#entry4682483
fortunately I'm keeping my lpt cable hooked up until I get this figured out. I just reflash to my xellous/XBR3 flash every time it Red Rings.
Post by: Faluke on April 30, 2010, 03:05:00 PM
I've tried following the normal freeboot instructions using an orig.bin nand dump that I did when I first JTAG'd. I got the same error. I've tried easy freeboot and I've tried flashing with xellous too. All same results.
Post by: Pacotera on May 03, 2010, 12:20:00 PM