Post by: Povo on October 27, 2011, 10:57:00 AM
Post by: krizalid on October 27, 2011, 12:02:00 PM
It's perfect to flash after xell flashing on first time hacking and/or updating NAND.
My question is: can this be used to update the NAND of a slim with the ResetGlitch hack running Xell?
Let's say I have Xell up and running with RGH and I want to flash a ggBuild image... can I use this tool? is it safe? or do I still have to use JTAG cable to program?
Thanks!
Post by: Povo on October 27, 2011, 12:08:00 PM
QUOTE
- by default it checks blocks before writing, and will NOT overwrite or erase any block with ecc/other issues (perfect for fbbuild images with auto remaps)
How can I force it to overwrite?
Post by: crisdo98 on October 27, 2011, 12:44:00 PM
QUOTE(krizalid @ Oct 27 2011, 07:02 PM) 
simply put "xenon.elf" with the file you wish to flash called "nandflash.bin" and run XellReloaded.
It's perfect to flash after xell flashing on first time hacking and/or updating NAND.
My question is: can this be used to update the NAND of a slim with the ResetGlitch hack running Xell?
Let's say I have Xell up and running with RGH and I want to flash a ggBuild image... can I use this tool? is it safe? or do I still have to use JTAG cable to program?
Thanks!
Yep, it's designed for RGH
"cOz released Rawflash v3, which allows you to flash your NAND from Xell '2Stages' (RGH Xell):"
My questions is: Will this work to reflash an xD card dual nand setup?
Post by: Povo on October 27, 2011, 01:45:00 PM
QUOTE(ZBeeblebrox @ Oct 27 2011, 07:49 PM)
Yes, you can use it to go straight from GliGli's RGH to ggbuild image. Tested Rawflash_v2 on Falcon and works perfectly.
Great!
Post by: warbeast on October 27, 2011, 01:48:00 PM
QUOTE(crisdo98 @ Oct 27 2011, 07:44 PM)
Yep, it's designed for RGH
"cOz released Rawflash v3, which allows you to flash your NAND from Xell '2Stages' (RGH Xell):"
My questions is: Will this work to reflash an xD card dual nand setup?
ofcouse it will a xd card is just a 48pin flash same as the one in the 360 so if you switch to it anyting that works on one will work on another
how about read/write for xd card from pc card slot now that would be fun :-)
Post by: xandura on October 27, 2011, 02:48:00 PM
Works great!
No more leaving the box on for hours on the -w64 command
Post by: uN0pEn on October 27, 2011, 02:50:00 PM
Post by: Lush on October 27, 2011, 06:58:00 PM
Post by: tactical on October 27, 2011, 09:19:00 PM
Post by: steveo1978 on October 27, 2011, 10:34:00 PM
QUOTE(tactical @ Oct 27 2011, 10:19 PM)
I do have a jtag-able 360, but haven't opened it yet, new in box. Could I use something like this to make it jtag-able. Like soft-mod style of jtag?
no
Post by: ddsdavey on October 28, 2011, 05:30:00 AM
This is great news.
Post by: trasman on November 07, 2011, 05:53:00 PM
No error.
Rebooted and got an red flashing light and a error message 71 I think.
Took the same .bin file and flashed using matrix USB flasher and it worked.
So clearly this program is not working very well.
Post by: alamez on November 16, 2011, 03:17:00 AM
Post by: DuggyUK on November 16, 2011, 05:39:00 AM
QUOTE(trasman @ Nov 8 2011, 12:53 AM)
It did flash the NAND on my 16MB Falcon using this program.
No error.
Rebooted and got an red flashing light and a error message 71 I think.
Took the same .bin file and flashed using matrix USB flasher and it worked.
So clearly this program is not working very well.
flashed my 16MB falcon without error.
Post by: trasman on November 18, 2011, 01:35:00 PM
QUOTE(DuggyUK @ Nov 16 2011, 01:39 PM)
flashed my 16MB falcon without error.
Post by: barnhilltrckn on November 19, 2011, 01:57:00 PM
QUOTE(trasman @ Nov 18 2011, 03:35 PM)
Care to explain whats so funny?
Well tbh that doesnt really look like he is laughing to me. The program works great. I have used it many times on many consoles and its perfect everytime, even on BB nands.
Post by: xpa12 on November 23, 2011, 07:11:00 AM
Ive been trying for ages now to use this tool to flash my Jasper 512 nand with the hacked image.
Xell Reloaded boots up and seems to be OK (but it has a black background not the blue one that i see elsewhere - dont know if this means anything)
I put the nand on the root of the USB stick that is FAT32 renamed to nanddump.bin and the correct files and folder from the Rawflash v3.
Each time it detects the xenon.elf and goes to run the rawflash but hangs at 1 of 3 points.
1 - after the controller initialisation
2 - after UDA is registered with a message "*trying to make sense of uda, lets assume it's fat"
3 - after writing a very small part of the nand it will just freeze and not carry on.
Anyone got any suggestions?
I have also tried writing the hacked image using nandpro and various programs but this does not result in the console booting to a dashboard, just a black screen and the glitcher stops attempting after about 6 minutes.
Post by: SNAAAKE on November 26, 2011, 04:20:00 PM
QUOTE(trasman @ Nov 7 2011, 07:53 PM)
It did flash the NAND on my 16MB Falcon using this program.
No error.
Rebooted and got an red flashing light and a error message 71 I think.
Took the same .bin file and flashed using matrix USB flasher and it worked.
So clearly this program is not working very well.
I had the same problem. wrote a jasper RGH image and it didnt work. console wont turn on and no power. then I flashed the same image with usb nandflasher with the command "+" instead of "-" and it worked. I am guessing this app needs to be updated. the creator probably aren't aware of such issues.
I flashed a slim RGH image with this and it worked fine tho.