Post by: Joshatdot on January 16, 2007, 04:22:00 PM
Krazies NDURE 1.1 Softmod
with Action Replay
and a USB Flash Drive
with Action Replay
and a USB Flash Drive
Make yourself a XBox to USB adapter, or Google-Froogle for one and buy one. I had a Mad Catz Universal SharkBoard, it came with a XBox MemCard Slot to USB Adapter, and it works perfectly.
Turn on the XBox with no disc, plugin the USB adapter, and plugin the USB Flash Drive you want to use. You can check to see if the Flash Drive is compatible here, Xbox USB Compatibility List.
Goto Memory, and you should see this:
Now the USB Flash Drive is formatted, and you can see its size in the Memory menu:
My US Modular QuickDrive USB 2.0 Flash Drive 64MB formatted to 3998 blocks.
Now you need to download and install Action Replay for XBox PC Software and USBVIEW
Once Action Replay for Xbox is installed, launch it, and then minimize it. Connect your xbox formatted USB Drive into the computer.
Now launch USBVIEW, you should see a bunch of stuff, but look for USB Mass Storage Device, and click on it you should see something like this:
My device is 0x457 & 0x0151
On the right side of the window, write down the idVentor & idProduct numbers.
Now goto where you installed Action Replay, usually C:\Program Files\Datel\Action Replay XBOX. In that folder is a sub folder called Drivers, go there and open XBREADER.INF in Notepad.
In the [_Devices_] part make a new entry with the VID & PID numbers you got from USBVIEW:
My device's VID & PID are 0457 & 0151
Now open up Device Manager, goto Control Panel, open System, click the Hardware tab, then click the Device Manager button.
In Device Manager, open up the Universal Serial Bus controllers, Right Click on USB Mass Storage Device, and select Update Driver.
Then select Install from Specific Location (Advanced), click Next.
Select Dont search. I will choose the driver to install., click Next.
Select MaxDrive Xbox, click Next.
After driver is installed, click Finish, close: Device Manager, System Properties and Control Panel.
Part II in next post (X-S limits 10 pix per post?)
Part II
Un-minimize Action Replay for Xbox, and you should see on the left side the MEMORY CARD displays memcard, and the AR in the middle of the program is Green:
Now you need to get the gamesave exploits from "usual places", guide here.
I use Krazie's NDURE 1.1 Softmod installer, they can be found in the "usual places" in exploits, _Packages, Krayzie Ndure Installer.
Pick the one that matches the game you are going to use, 007 Agent Under Fire, MechAssult or Splinter Cell. I would recommend Splinter Cell, cause any version of that disc can be used. All copies of 007 AUF that are NOT Platinum Edition will work. MechAssult is a bit of an odd duck, you need a Disc with part number X08-82261, X08-82262 or X08-82264.
Once you have downloaded the Gamesave, unzip it, there should be a sub folder called xxx save, (xxx would be 007 save, MA save, or SC save1 & SC save2)
**NOTE** There are two Splinter Cell gamesave exploits, one for NTSC and the other for PAL, make sure you download the correct one. Each one of those gamesaves have two UDATA.ZIP files, one is SC save1 and SC save2.
In the Save folder there is a UDATA.ZIP file, drag and drop that ZIP file to the Action Replay window, into the MEMORY CARD side. The transfer process could be slow, so just wait =)
After the gamesave is transferred it should something look like this: (I transferred the UDATA.ZIPs for all 3 games)
Now you can stick that USB flash drive back into the Xbox, and copy them to your Hard Drive!
Then once they are copied to the HDD, boot the Game you are goind to exploit with, and load the save!
**ATTENTION**
The 007 AUF version needs to be loaded a certain way in order to get the save working otherwise it will just boot to a black screen. When you get to the load game screen DO NOT select load game but start a New one. Then when you reached the actual game (after the cutscene), hit the Start Button and select Quit Game. Then go back to the Main Menu, Load Game screen and this time select "Load Game".
2006-11-11
X-S: Joshatdot
Post by: cobra1713 on January 16, 2007, 05:51:00 PM
thanks
~cobra1713~
Post by: cobra1713 on January 16, 2007, 06:19:00 PM
Post by: Joshatdot on January 17, 2007, 09:05:00 PM
QUOTE(cobra1713 @ Jan 16 2007, 05:26 PM) 
sorry i figured out the ntsc thing now my problem is i got the two files onto my harddrive but when i go to load it in splintercell it freezes when i go to checkpoints to load...anyhelp? thanks
All other Splinter Cell games need to be deleted, there should only be LINUX_PROFILE. Also what brand of memcard are you using? or are you using a USB Drive?
Post by: GeneralBananas on January 24, 2007, 03:35:00 PM
Post by: Joshatdot on January 25, 2007, 01:56:00 AM
C:\Program Files\Datel\Action Replay XBOX\Drivers\xbreader.inf
file .. and update the USB mass storage device driver in device manager correctly?
you can try Xplorer360 beta5 , I could not get that to work correctly on my computer, but I think it was because my 64mb usb was bad, i'll have to try again with a new usb drive.
If you are going to try the Xplorer360, you have to uninstall the MaxDrive drivers and reinstall the usb mass storage drive drivers.
After MaxDrive is uninstalled, plug in a FAT/FAT32 formated usb drive. In device manager, usb mass storage device might have a yellow ! on it, just update the driver (not with the max drive driver)
I just got a Sony Micro Vault Tiny 256mb, and it worked perfectly in my xbox & AR software & on my Dell with Xplorer360 beta5
With Xplorer360 beta5 you drag and drop the UDATA 4541000d type folders to partition 0
This post has been edited by Joshatdot: Jan 25 2007, 10:06 AM
Post by: GeneralBananas on January 25, 2007, 01:10:00 PM
Post by: GeneralBananas on January 25, 2007, 09:47:00 PM
Post by: Joshatdot on January 26, 2007, 01:12:00 AM
QUOTE(GeneralBananas @ Jan 25 2007, 12:17 PM)
Tanks man worked perfectly with xplorer360
I think i'll make another tut with Xplorer360..its so much EZ'er to setup.
no clue about the NHL 07 & MaxD, sorry.
Post by: GeneralBananas on January 26, 2007, 08:48:00 AM
Post by: deadparrot on January 27, 2007, 03:48:00 PM
I could never find a tutorial detailing this here...
This post has been edited by deadparrot: Jan 27 2007, 11:48 PM
Post by: Joshatdot on January 28, 2007, 02:30:00 AM
QUOTE(GeneralBananas @ Jan 26 2007, 07:55 AM)
I was wondering also if i need to keep the splinter cell profile and Linux installer on my xbox now that I've installed Unleash X?
I would keep it, cause you can always load that gamesave if anything goes wrong.
Thanks for adding to the sticky, hopefully people will find this helpful & useful.
Post by: Joshatdot on February 13, 2007, 04:37:00 PM
Post by: PS2turndXboxFREAK on February 13, 2007, 06:14:00 PM
QUOTE(Joshatdot @ Jan 26 2007, 03:19 AM) 
I think i'll make another tut with Xplorer360..its so much EZ'er to setup.
no clue about the NHL 07 & MaxD, sorry.
YES YES!!! PLEASE DO.....also is this better Dash to use then XBMC or NOT? I had some issues but cerealkillaj helped me fix those and a (BIG PROPS 4 THAT) so now I have the soft mod installed and now I want to change from EvoX to something more of a media center so I can access Inet etc......
Any help would recieve a HUNDRED THANK YOU's!!!!!
Post by: Racer_911 on February 14, 2007, 04:23:00 AM
tough i follow PART I sucessfully and turn my usb stick into a mem card, my AR wont recognize it, neither AR has any savegame.
Post by: jabroniekilla on February 15, 2007, 11:53:00 AM
2nd, You should add that you can cut a usb cable and an xbox controller dongle ($4) and splice the wires together, color for color, and you have a way of transferring the gamesaves without having to goto device manager and messing with it.
good tutorial with nice pics!
Post by: Joshatdot on September 04, 2007, 09:54:00 PM
Post by: diablomastabarb on September 06, 2007, 02:26:00 PM
QUOTE(jabroniekilla @ Feb 15 2007, 07:53 PM)
1st thing people should know, KEEP THE EXPLOIT GAMESAVES ON THE XBOX! If you erase them and anything gets screwed up, you wont be able to get back to the exploit. It is basically like your backdoor way of getting "into" your xbox.
2nd, You should add that you can cut a usb cable and an xbox controller dongle ($4) and splice the wires together, color for color, and you have a way of transferring the gamesaves without having to goto device manager and messing with it.
good tutorial with nice pics!
You still have to make the PC recognize your device as a MAXdrive device, even if you do make your own cable.
Post by: thepainter on September 26, 2007, 06:37:00 PM
FRUSTRATED
Post by: Joshatdot on October 23, 2007, 09:57:00 PM
QUOTE(thepainter @ Sep 26 2007, 05:37 PM)
So, I'm trying to softmod an XBOX and have read multiple TUT's and so far I'm about half way there. I have a working or at least recognized USB stick. I have NDURE 1.1 installer, original Mechassault. I also have a mod chip xbox. I am basically looking to use this one with XBMC. I unrar'd the Installer and found three files 007, MA, SC..... I'm using MA so I open that and found MA Save and Rescue disc, NOW here is where I get stuck I had planned on ftp'ing the file from my modded xbox to my memory stick but what file or files do I transfer the whole MA Save folder, the udata.zip folder or the UDATA unzipped folder (I think I tried all but the udata.zip) all transfered but came up as a corrupted file when I tried it on my xbox. So then I tried the AR, USB.exe - did everything but AR doesn't recognize my MS so i can't transfer my file to the MS. My xbox defineately sees my MS but I can't seem to get the right file(s) transfered - I can see the light but right now it's not getting bigger.
FRUSTRATED
Did you add the sticks VID & PID to the XBREADER.INF?
Did you install the MaxDrive Xbox drivers?
This post has been edited by Joshatdot: Oct 24 2007, 05:01 AM
Post by: b0ricuaguerrero on October 31, 2007, 05:20:00 PM
Post by: Joshatdot on November 04, 2007, 10:34:00 PM
Post by: gamerzhouse on February 11, 2008, 10:46:00 PM
Post by: Joshatdot on February 03, 2020, 03:02:00 AM
found em...TUT as follows
- Start up the program and connect your xbox formated flash drive
- Drive menu > Open > Harddrive or Memcard
(IMG:http://img515.imageshack.us/img515/7645/xplorer3602dm9.png)
- It should find it, Select Partiton 0
- Just drag & drop UDATA 4541000d type folders to Partition 0
(IMG:http://img208.imageshack.us/img208/7316/xplorer3603kv4.png)
This post has been edited by Joshatdot: Yesterday, 11:16 AM