...which is where
(1) desoldering the jumpers to reprotect the BIOS,
(2) a warranty seal covering one of the screw holes, and
(3) ensuring ConfigMagic, etc. aren't on the system
come in handy!
At the very least, desoldering the jumpers is worth doing. Stops them twatting around and causing a FRAG. Give someone ConfigMagic and they'll chew up their EEPROM in seconds. Stuff like ConfigMagic is fairly hard to get hold of for most Xbox owners (who don't know about the existence of those elusive "Usual Places"), so giving them nothing they can kill the box with is well worth doing.
yup, i just flashed another tsop for a friend, and i left the jumpers unbridged.
in this case, i didn't even solder. all i did was strip a piece of wire, cut it in to a really small piece, bent it, then stuck it inbetween the two points to be bridged and went over it w/ electrical tape and voila!
now that i know how to solder the right way, it's a piece of cake, but nothing beats this. it is a hassle to get right though.
Flashed it and works great!
if you can use phoenix bios loader, you could always make the eurasia flash disc and a bios.bin disc and flash with that instead of the forementioned. But then again depending on what you want to do with your xbox, you may only need the PBL and that's it.
Personally I only flashed my TSOP to have as a "recovery" machine should anything go wrong with one of my softmods.
I successfully flashed my brothers xbox with Mech-Eurasia... it was rather easy....
hey i got a question cause i was reading and seems that winbond is kind of a problem for me cause my maine method for the 5 boxes i have flashed all 1.0-1.3 i have used evox how can you tell if you have a winbond chip cause i think i might have one on the recent guys i am working on it has a w with a pacman thingy eating it anyone got a description or think thati have a winbond chip and if so whats special that i need to do or not to do
thankz
yeah, pacman eating a W is winbond, lol, use raincoat .7 to flash
the chip pictured here is a winbond
I done about 20-30 TSOP flashes with an X2.2 Lite
I attempted it and this is what happen now im in the process of trying to get this fix.. Any help gladly appreciated.. Please post in my thread with suggestions
http://forums.xbox-s...06170&hl=happen
Done +50 xbox´s via 007 and raincoat.
Forked 2 becouse the soldering i did was sloppy.
100% my own fault.
So instead of 2 bridges to solder i had to pull out the 29 wire.....
Take the time from the start! You will not regret it in the end....
Next up: 200+ gig hd, Philips pot tweaks and maybe a cheapmod if I decide to go XBL.
i dont think the eurasia saves can be updated because of where it loads raincoat from
the main reason i say to use raincoat .7 is because it will resize a bios to fit a 1mb TSOP, and i believe eurasia will chack and not flash if the size is from, so its not so bad that it cant be updated
Flashed a couple TSOP's the other day and wanted to kick myself in the head for not doing this sooner. Used BlueInfinity's Mech Eurasia technique and damn it was easy.
Just flashed my 1.4 box - easier than pie!
Winbond chip, there appeared to be some problems with it in this forum, but it worked great. I suppose those who had problems screwed up the soldering.
Took me ~2 minutes to solder, I don't know how anyone could screw that up, really easy. I have been soldering stuff most of my life though, so who knows.
Used Raincoat 0.7 in 007. One problem was my router runs on a 192.168.2.* net locally, so I had to reconfigure it and then set DHCP to assign 192.168.0.64 to the Xbox's MAC address.
Once I got the network connected, the flash went perfectly. I'm tempted to reflash to fancy up the boot a bit (I left it green, completely stock EvoX M7 bios with eject fix, didn't want to fuck it up) but it's probably better just to be safe and disconnect the points.
I just tryed my first flash. I have never used a soldering iron in my life. Bought the iron, practiced for a couple hours and then went at it. I think I screwed my xbox. I couldn't get the solder to bridge the 2 points. Its a 1.0, and I got the wire soldered on the back just fine. If your xbox will load evox from hard drive, but will not play games does that mean its screwed? Can a modchip fix this?
I've flashed one where it stopped showing progress when it erased 30%. I left it alone for about half an hour and it all worked out fine.
you could just put your old hard drive back in and then backup the eeprom again, and redo your 40 gig or just dont lock your 40 gig.
forgot to mention, I have flashed many xboxes, some 1.0, 1.1, one 1.3+
I put a 80 gig HDD in my v1.0 but I havent locked it. I had no problems, and I didnt even use slayers.
ive flashed about 50 tsops (7 of them were sharp , they where hot and difficult.)
but in my last flash ive installed a switch and flashed with raincoat.
ive flashed the 1st sector and now its crap!!!!!
HOW CAN I REFLSAH MY TSOP?
ive got a xbit , the box just boots 3 times and no screen.
and my seagate makes a beep noise
ok ive solved the problem with the 3wire trick
i have TSOP flashed 3 xbox including mine which i had a 2.3b modchip that kept fraggin tossed it, flashed with 007 and my ibook.(who needs a pc)
Flashed my Xbox 1.3 / Winbond W49F020 with Raincoat 0.7. Only trouble was actually getting the board soldered. I was using a soldering iron with a high wattage which made it difficult, I even managed to splash solder all over the area above the LPC. It wasn't hard to remove as I had desoldering braid on hand though. Went to radio shack and picked up a 15W iron, after that it was smooth sailing. It is highly recommended you get a 15W iron rather than to use that 35W you've got lying around. Don't attempt if you have no soldering experience.
When I get my digcam I should post pictures of what that 35W iron did to the top of the PCB. Looked like I had fried the board. Surprisingly the Xbox didn't FRAG and the traces were still intact.
The 15 watt iron from Radio Shack rocks. It's makes the TSOP job much easier. I've been through 5 TSOP mods with only 2 v1.0,1.1 which was mine and a friends. I soldered on TSOP enable/disable switches on all of them but only have a bios switch on two of them obviously. I've had no prior experience unless you count the screw job I did when I was a little bit younger trying to mod my PlayStation with a 30 or 40 watt iron I think. I didn't know shit! I just had solder and the iron that I found in my dad's toolbox and that was it. I wasn't even grounded and I didn't even use a anti-static mat. I just did it on top of my desk. That was a disaster. I learned from that experience that you must-have the right supplies in order to do any solder job correctly.
I just ordered a Weller 12 watt iron though recently because it had a .02 fine point. It set me back $40. I need it though because I'm going to attempt to mod my PS2 as soon as my iron and Matrix Infinity chip are sent to me. I heard the PS2 mod is dramatically harder.
Used an "hair" out of an IDE-Cable to bridge the points.
Works fine and burns the shit out of your mamas ass....
Just did my first one tonight.
Have done many solderless installs and a few pin header installs.
Figured I would take the plunge into TSOP.
The hardest part for me was getting a locked HDD to boot to the original M$ Dash. Once I got that running, next hardest part was getting the Mech exploit over.
Other than that, very easy. Soldering was easy....I'll definately do this again.
Like most things here on XBS, just follow the tuts to a T....if you do your research and take your time, you will do fine....
I dual tsoped a 1.1. Flashed one side with X2 4981 and the mobo fragged on both selections of switch. Resoldered everything and was able to boot retail bios on one side but the other side was a frag. Switched to X2 4983 bios and now its all wrking perfectly.
Now to try and fix my friends "mess up"...
Can some one help me i followed this guide on how to install a swithc and i followed it percisly and now my xbox frags even when i take out the switch. Anyone know what i can do?
Details: V1.0mb (LPC port damaged), USB pen drive for gamesave, Mechassault orig disk, Highway_007mech_flash_pack (utilized eurasia), M8+ bios (resized w/EVtool).
After flashing I utilized Slayers boot/ Install disk to setup a new HD.
Fast-n-Easy, Smooth as glass!
Thanks to all!
Regards,
OverG
V1.0 flashed using AUF Exploit and X2 4976.02 Bios
Thanks to the everyone on the scene who made the tuts and gave the explanations to make all this possible
cheers
pak
Another Bling-Bling for more Ching-Ching!
Next successful TSOP.
Ive done that on about 4 boards because of lightning (electric cut out), and being drunk. Now I always use a UPS and dont touch the beer
QUOTE(kungpaomaster @ Dec 19 2004, 10:35 PM)
Anyone try using the cold heat soldering tool from the TV ads?
I thought this would be an interesting poll. Please respond only if you've actually attempted flashing the TSOP yourself.
I've flashed over 20 boxes wtih a Messiah-X chip.
no problems here.
Fireball.
just the chap i need.
what are the wires to cut when flashing the onboard ?
(or wires to install swtiched if prefered)
cant seem to find any info what so ever.
cheers in advanced.
Max
Check out the tutorials section.... it's well documented. I had no problems wiring a switch for writing to the TSOP and a switch to disable my enigmah.
I've removed, reprogrammed and resoldered about 50 TSOP's without any problems.
Also done a few multiBIOS mods....they work nicely but care needs to be taken reflashing the chip once fitted (i.e. making sure that the state of the chip is correctly set) else the TSOP dies...
The LPC cheapmod is now flash updateable via the EvolutionX software so I don't do the TSOP's any more...probably start doing them again for the v1.1 consoles if 256Kb BIOS's aren't made available (but they would have to be a multiBIOS setup to gain access to an image > 256Kb)...
"Check out the tutorials section.... it's well documented"
not for the messia-x it isnt.
just for referance its points A & C on the messia-x mod.
I had no problem with my messiah x, except I could'nt get a switch to work, so I cut all the wires after I booted to EvoX one at a time starting with A... that went flawless. I heard that making the two switches to A and C and creating to long of wires can cause problems, maybe that was why it wouldnt work...
/me shrugs
Regardless, TSOP is flashed and it is the l33ts!
Done too many onboard tosps from versions 1.0 to 1.5 so easy few blobs of solder got it down to about ten mins a go just with 007 hack plus few pence worth solder and you got a top machine love it thanks to all you guys on here who helped me and XBOX SCENE for hosting this site nice one
QUOTE (meokman @ Nov 11 2003, 07:08 PM) |
Done too many onboard tosps from versions 1.0 to 1.5 so easy few blobs of solder got it down to about ten mins a go just with 007 hack plus few pence worth solder and you got a top machine love it thanks to all you guys on here who helped me and XBOX SCENE for hosting this site nice one |
Same here. TSOP's are so easy, it isnt funny.
QUOTE (shank69xo @ Nov 11 2003, 07:13 PM) |
QUOTE (meokman @ Nov 11 2003, 07:08 PM) | Done too many onboard tosps from versions 1.0 to 1.5 so easy few blobs of solder got it down to about ten mins a go just with 007 hack plus few pence worth solder and you got a top machine love it thanks to all you guys on here who helped me and XBOX SCENE for hosting this site nice one :P |
Same here. TSOP's are so easy, it isnt funny. :D |
No your wrong... It IS funny!! LOL :D
Thank microsluft for making it easier and easier.
well i guess this thread kills the belief of the modchip fans that 9 out of 10 TSOPers fuck it up, lol
just a note, i personally have nothing against modchips and when the x3 comes out i will be definately be getting one, i just feel that TSOP is a very cost effecient alternative to a modchip for people who are as broke as i was before i started TSOP modding for people, lol
done about 40, all versions, had to "repair" one, cuz I was lazy and accidentally flashed a 256k to a 1MB TSOP.
Anyone who has screwed up a xbox by doing a tsop flash shouldnt even be trying it, its so freggin simple.
QUOTE |
Anyone who has screwed up a xbox by doing a tsop flash shouldnt even be trying it, its so freggin simple. |
I agree. I've done a tsop flash on 13 boxes and haven't had any problems.
well then how do you flash the tsop on a ver 1.3 [hynix...TT] with no modchip because ive tried and tried but still nothing
I have a simple switch (A19 to ground) to split the BIOS area in two and made the mistake of flashing two copies of 4977 on one half with retail in the other and naturally it didn't work as both are visible but too different.
Reflashed it and everything is fine. I know forcing A19 to Vcc or ground solves this but I couldn't be bothered...
Flashing the TSOP is easy *IF* you know what you are doing, and bloody dangerous if you don't.
Done over 50 myself, screwed up 3-5 times and have always been able to fix with the help on these forums and the main site.
I flashed my friends xbox tsop useing 007 i am going flash my main xbox's tsop (has martix chip in it) and put the matrix in my other one. i am also doing a other friends xbox tsop mutibios. retail-hacked bios. LOVE TSOP FLASHING IT IS SO EASYISH!
my first 3 went perfect with 007/evox. last one i did had a windbond bios chip. with the help of the forums, i got it to work with 007/raincoat. Thanks!! Now I can do the whole process in about 15 minutes.
I've done about 100 TSOP flashes now, never any problem (not even a "flash not writable" or manufacturer=0x09, device=0x00 error).
As long as your soldering of the jumper points is OK (use a strand of 0.1mm² wire if the solder refuses to bridge the gap) and you don't go flashing 1.4/1.5 machines with a BIOS other than EvoX M7, things should work out OK.
I found out the hard way
After about 25 tsop's I learnt what a BFM tsop meant...
BLOODY FUCKED MOBO
fixed with my own homebrew 0 fun but learnt a lot more after many headaches !!!!
good fun this modding but would be nice if Billy Boy Gates could leave them tsop points bridged already - save opening up the xbrick just to join a few dots
fanx n greets to all the guru's who helped this trainee newbie
I have only done 3 xboxes (most people around here are ps2 whores) but the 3 i did do, all were successful. The first one was a matrix tsop. Second and third ones were via 007.
all were 1.0 xboxes.
3 fuckups!
1 tried to reflash with original bios, which didnt worked out, guess wrong bios(soldered a lpc chip in and didnt try to fix the tsop)
2 1.5 xbox tried to flash it with x2 4977 (by mistake) i knew about the M7 bios (still dead, trying to get a lpc 2.0 chip)
3 1.5 xbox flashed it with 4977 again by mistake, this was so stupid and dumb that i feel so bad about it (still dead, trying to get a lpc 2.0 chip)
I love doing it, it fun and scare at the sametime too!!!
???
you may need to rephrase that, booting fromt eh HD is what the xbox always does where there is no game in the dvd drive (when it loads the dashboard)
OK just to add my tuppence worth.
Have flashed 153 and Recovered 47 from a buggered up flash (usually user error!!) No DOA's.
Only 1 - the 1st one mine - has ever had a modchip in, and that lasted exatctly 2 days before it was resigned and the TSOP was flashed. NOw it does have a lease of life in the TSOP recover area, so I am glad I hung onto it.
I think the TSOP way is neater, cleaner and less time consuming that modchips. Also it is less prone to shock or vibration in it's standard - all be it flashed form, No Mod to work loose, and if you Read The F*cking Manuals - AKA Readmes - in the files you will not go wrong.
Regards,
Si
(Edit for my sh*tty typing lol)
that was not a fun day.
So 33 out of 35 all good. used 007 evox trick did about 10 of them the raincoat way