Post by: Joshua on May 20, 2003, 05:47:00 PM
What 's the most recent/decent bios that works in conjunction w/ the native MS bios in a 4-bios [switched] TSOP implementation. Haven't had any sucess w/ D6 nor 4976.02... they seem to be mutually exlcusive as either the hacked bioses work else the MS native...
Cheers,
Josh
xbox1: Homebrew AT49F
xbox2: X2Pro
xbox3: TSOP, 4way/switched
Post by: BEClueless on May 20, 2003, 09:23:00 PM
Post by: smokeingit on May 20, 2003, 10:45:00 PM
bios's that are made for the 1.0 or 1.1 can be used for multi TSOP setup.
Bios list for 1.0
the bios's that are just made for the 1.0 version will work with the tsop multi, same go with the 1.1. if its made only for 1.1 then you can have those as a multi.
bios that do work as multi are 4974 and newer... and with the evox d.6 they have to be for the 1.0 or 1.1 only none of this multi version shit.
so an example is
orginal+evox 2.6+ 4973+complex 1.03
willl work... if you have anything newer or a bios that is multi then the system will frag or the bios wont boot.
Post by: 52volts on May 21, 2003, 01:10:00 AM
| QUOTE (Joshua @ May 21 2003, 01:36 AM) |
| Question for the seasoned TSOP flashers: What 's the most recent/decent bios that works in conjunction w/ the native MS bios in a 4-bios [switched] TSOP implementation. Haven't had any sucess w/ D6 nor 4976.02... they seem to be mutually exlcusive as either the hacked bioses work else the MS native... Cheers, Josh xbox1: Homebrew AT49F xbox2: X2Pro xbox3: TSOP, 4way/switched |
Multiversion will work on both the 1.0 and 1.1 xbox if you wire it up correctly! I got my V1.1 and several v1.0 working with evoxD6ef+evoxD6ef+orig+orig and x2.4972.02+4976.02+orig+orig. You need a 3 way switch the center to a19 and the top to vcc+ and the the bottop of the switch to ground. I found this on the forum somewhere, and take no credit for it. BUT IT WORKS
check this out and go from there http://forums.xbox-scene.com/index.php?act...ST&f=23&t=48213
This post has been edited by 52volts: May 21 2003, 08:25 AM
Post by: BEClueless on May 21, 2003, 05:37:00 AM
Post by: beaumac on May 21, 2003, 08:51:00 AM
Post by: Shafted! on May 21, 2003, 08:53:00 AM
Post by: Scan-C on May 21, 2003, 09:37:00 AM
| QUOTE (Shafted! @ May 21 2003, 04:42 PM) |
| Hey, once you enable TSOP writing by sodering in the jumpers, and do the 007 hack, then do the multi-switch tsop mod, can you flash the other half ot he tsop via evox dashboard? |
you can.boot your box with the flashed part and when evox has loaded switch over to the other.
Post by: Shafted! on May 21, 2003, 10:36:00 AM
with multi-boot bioses, and working MS bioses that when used you can get on live, what is the point of having a modchip?
I mean, TSOP seems like teh way to go, and less points to solder....
This post has been edited by Shafted!: May 21 2003, 05:36 PM
Post by: BEClueless on May 21, 2003, 11:29:00 AM
Post by: kidkinetix on May 21, 2003, 04:50:00 PM
try to put the orignal bios as the first 1/2
Post by: Shafted! on May 21, 2003, 04:55:00 PM
How, or what, are you guys using to put together your bioses?
If someone could PM me with some help, that would be GREATLY appreciated.
Post by: BEClueless on May 21, 2003, 05:13:00 PM
Taken from the Tutorials Section:
4/ The last step is to make the bios Image:
First we need 4 different (or same) bios images for this purpose we will use this example:
EVOX 2.5 + x2 4973 + x2 4972+ ORIGINAL 4034
To make this a 1 meg file with this setup we go to command prompt (DOS) and type:
copy /b EVOX 2.5.bin+x2 4973.bin+x2 4972.bin+Original 4034.binMulti Bios.bin
After doing this we got our multi bios!! Next boot up EVOX, ftp the Multi Bios, turn all switches OFF, and flash!!
Post by: Joshua on May 21, 2003, 10:05:00 PM
JK
Post by: mruell on May 21, 2003, 09:01:00 PM
| QUOTE (Joshua @ May 20 2003, 08:36 PM) |
| Question for the seasoned TSOP flashers: What 's the most recent/decent bios that works in conjunction w/ the native MS bios in a 4-bios [switched] TSOP implementation. Haven't had any sucess w/ D6 nor 4976.02... they seem to be mutually exlcusive as either the hacked bioses work else the MS native... Cheers, Josh xbox1: Homebrew AT49F xbox2: X2Pro xbox3: TSOP, 4way/switched |
Seems like the " Vcc - A19 - Gnd " way works better then the " Gnd " only way
mruell
Post by: Shafted! on May 22, 2003, 06:02:00 AM
Post by: 52volts on May 25, 2003, 12:23:00 AM
| QUOTE (Shafted! @ May 22 2003, 08:22 AM) |
| When doing the A19 -> vcc -> ground mod, you need a switch with three prongs right? What do you do about A18? Is A18 left using a 2 prong switch? Thanks. |
Right, and you dont need to do anything to A18 unless you want to choose from 4 different bios