Post by: Xbox-Scene on May 04, 2007, 10:33:00 PM
Xplorer360 Beta 6 - Adds Support for 120GB HDD and 512MB MC Posted by XanTium | May 4 23:57 EST | News Category: Xbox_Xbox360 |
| A new version of Xplorer360(info), a tool to read/write on your Xbox/Xbox360 HDD and Xbox360 Memcard on PC, has been released. What's new/fixed: * support the new 120GB Hard Drives * support the new 512MB Memory Cards Official Site: http://www.360gamesaves.com Download: here |
Post by: Angerwound on May 04, 2007, 09:20:00 PM
Post by: ILLusions0fGrander on May 04, 2007, 11:57:00 PM
Post by: hurlamania on May 05, 2007, 12:56:00 AM
Post by: TheSpecialist on May 05, 2007, 05:39:00 AM
This post has been edited by TheSpecialist: May 5 2007, 12:46 PM
Post by: Greenvalor7 on May 05, 2007, 08:24:00 AM
QUOTE(TheSpecialist @ May 5 2007, 01:15 PM) 
After adding the partition info manually, it worked though. But it would be nice if it worked without having to edit partition info manually.
Sorry to bother you but do you think you could tell me how to add the parition info manually? I searched the scene and was unable to find anything like that. Id really appeciate it.
Post by: bucko on May 05, 2007, 09:29:00 AM
Post by: Angerwound on May 05, 2007, 09:44:00 AM
QUOTE(TheSpecialist @ May 5 2007, 05:15 AM)
Nice work Angerwound. Did you also add support for WD BEVS drives ? The old version didnt, because after formatting it on the x360, it contained one partition less than the original MS drive and therefor your tool rejected it. After adding the partition info manually, it worked though. But it would be nice if it worked without having to edit partition info manually. If you want me to test something, I'd be happy to help out.
Roofus is the mastermind of Xplorer and would be better able to answer you questions. Will direct him here.
Post by: gaming fanboy on May 05, 2007, 10:12:00 AM
QUOTE(Angerwound @ May 5 2007, 05:20 PM)
Roofus is the mastermind of Xplorer and would be better able to answer you questions. Will direct him here.
also i use your program alot for gamesaves, but i noticed a bug when injecting a folder under E0000 it will be sent to the main content folder and then you can drag it to the folder and delete it, it's a weird bug, but i will live with it!
if you dont know what i'm talking about i will get a screenshot of what happens when i inject a game folder with a save in it.
Post by: Greenvalor7 on May 05, 2007, 11:02:00 AM
The Hdd is a "specialist" of the 120gb hdd that I purchased and works fine when connected to the 360. This is the first time the 120gb hdd has been connected to the computer. When I first connected it to the compter by using XSATA, windows proceeded like I installed a new hdd. In device manager under Disc drives I now see
"Fujitsu MHW2120BH USB Device". However when I try ro access the drive via Xplorer I get a fatx error.
So my questions are:
1) What can I do?
&
2) Has anyone been successful with their "Specialist" hdd?
** My Operating System is Windows XP SP2 **
Post by: ITALIANO on May 05, 2007, 06:43:00 PM
Post by: TheSpecialist on May 05, 2007, 08:50:00 PM
QUOTE(Greenvalor7 @ May 5 2007, 05:00 PM) 
Sorry to bother you but do you think you could tell me how to add the parition info manually? I searched the scene and was unable to find anything like that. Id really appeciate it.
Well, to get a 20 gb WD BEVS recognized in xplorer360, you can edit sector 1024 (=0x400) = byte 0x80000. You need to make it look like:
58 54 41 46 00 00 00 00 00 00 00 10 00 00 00 01
So, the easy way to do this: open your drive with winhex( http://www.x-ways.net/winhex.zip ) by pressing F9, select your WD BEVS drive, press <ALT>+G, use position 80000 (hexadec) and then edit these 16 bytes starting at 0x80000 to look like above. Save it and then xplorer360 will work, at least with the 20 gb version
Not sure if this will do the job for the 120 gb version, haven't tried this myself yet.
QUOTE(Angerwound @ May 5 2007, 06:20 PM)
Roofus is the mastermind of Xplorer and would be better able to answer you questions. Will direct him here.
Thanks, would be great if your nice tool would standard have WD BEVS support too.
Regards,
TS
This post has been edited by TheSpecialist: May 6 2007, 03:58 AM
Post by: majzor on May 05, 2007, 09:31:00 PM
But i still can not view the contents of Partition 3 on the 120GB HD on my Elite system. Any ideas?
This post has been edited by majzor: May 6 2007, 04:40 AM
Post by: 0794 on May 06, 2007, 07:37:00 AM
QUOTE(majzor @ May 5 2007, 11:07 PM)
Good Release!
But i still can not view the contents of Partition 3 on the 120GB HD on my Elite system. Any ideas?
angerwound said roofus would be directed to this thread, maybe then answers will come...
thanks for the release!
Post by: Antman1 on May 07, 2007, 08:39:00 AM
Post by: Greenvalor7 on May 07, 2007, 10:53:00 AM
QUOTE(TheSpecialist @ May 6 2007, 03:50 AM)
Well, to get a 20 gb WD BEVS recognized in xplorer360, you can edit sector 1024 (=0x400) = byte 0x80000. You need to make it look like:
58 54 41 46 00 00 00 00 00 00 00 10 00 00 00 01
Thanks TS! I went ahead and followed your directions with the 120gb WD BEVS and xplorer sees the drive now! So thats a step in the right direction. THe only thing is, I think I now have the same problem that everyone does with their retail drives, only partitions 0 and 3 show up and neither have a plus sign next to them. Hopefully Angerwound will point Roofus over to this thread
Post by: TheSpecialist on May 09, 2007, 06:08:00 PM
The problem with BEVS drives is twofold. First of all, your tool wants to see a FATX partition at 0x80000. This partition does not exist on WD BEVS drives, not even after it's formatted on the 360. It's probably created at the MS Headoffice (IMG:style_emoticons/default/smile.gif) Anyway, after adding the partition manually (like i posted), xplorer360 then will continue as normal.
However, the 2nd problem is that xplorer360 somehow thinks that the root directory cluster is at byte 0x131229000. While this holds indeed true for my 20 gb drive, it's not correct for my 120 gb drive. At byte 0x131229000 there's only a directory entry for the 'Cache' directory (and that's why xplorer360 only lists that 'cache' directory when i click on partition 3).
The 'true' root directory cluster for my 120 gb drive is at 0x132973000 (while the partition itself is unchanged of course, at 0x130EB0000)
I haven't done enough research yet to find out how your tool determines the root directory cluster (I scanned quickly for a hardcoded value, couldn't find it at first glance), but obviously that's where it goes wrong. I hope you guys have some time to release a fix, if not, let me know if it is ok if i would release a small patcher for your wonderful tool, to make it compatible with the WD BEVS series (IMG:style_emoticons/default/smile.gif)
kind regards,
TS
This post has been edited by TheSpecialist: May 10 2007, 01:22 AM
Post by: TheSpecialist on May 10, 2007, 09:17:00 PM
1) First add the missing partition manually starting at byte 0x80000 of your WD BEVS. You need to make it look like:
58 54 41 46 00 00 00 00 00 00 00 10 00 00 00 01
So, the easy way to do this: open your drive with winhex( http://www.x-ways.net/winhex.zip ) by pressing F9, select your WD BEVS drive, press <ALT>+G, use position 80000 (hexadec) and then edit these 16 bytes starting at 0x80000 to look like above. Save it, restart the xplorer360 Beta 6 and the FATX error should be gone and you should see 2 partitions now. However, there'll be no data shown yet.
2) To get the data shown, exit xplorer360 and fire up your hexeditor again, but this time open the xplorer360.exe itself with it. Make sure you're using the beta v6 version. At offset 0xF0C2 you'll find:
68 77 03
You need to change these 3 bytes into:
00 C2 1A
Save it (make a backup !), restart it and you can now see the contents of the WD BEVS 120 gb, at least I can
BTW, this 'hack' won't work with the 20 gb version, so it's best to make a backup of the xplorer360.exe and use the 'unhacked' original version if you want to access a 20 gb hdd !
BTW2: There's no guarantee this will work, it worked for me, but it might not work for you. This xplorer360 hack might result in loss of data on your HDD, so make sure you're testing it on a clean WD BEVS and not one which contains a lot of important data
Please give me feedback on results
Post by: TheSpecialist on May 10, 2007, 10:11:00 PM
Best (and safest) way to do it, is (after you modded the xplorer360 like posted above) : right click on partition 3, extract it to some folder on your PC HDD, then load the modded/hacked xplorer360 and drag the contents that you saved to disk, to partition 3 again.
You might also use the 'image' function in xplorer360 but I don't know if that works ok with the modifications ... Only 1 way to find out
Post by: TheSpecialist on May 11, 2007, 06:04:00 AM
The reading of the wrong directory cluster is indeed caused by the way you calculate it. You're calculating it like:
Root directory cluster = cluster chain start+ cluster chain length.
Cluster chain length = 4 byte entries * (partition size in bytes /$4000 bytes per cluster).
This of course is correct, but the problem is that you've hardcoded the partition size in your tool. If you correct that partition length for the 120 gb version (like i did in the small patch I suggested above), it all works
I think you've just overlooked that partition size when you released beta v6.BTW: tell Roofus that the tool was very well and 'clean' coded ! (allthough he probably knows that himself, hehe
) He sure knows what he's doing. Respect !
Post by: Antman1 on May 11, 2007, 09:02:00 AM
QUOTE(TheSpecialist @ May 11 2007, 01:40 PM)
@ Angerwound:
The reading of the wrong directory cluster is indeed caused by the way you calculate it. You're calculating it like:
Root directory cluster = cluster chain start+ cluster chain length.
Cluster chain length = 4 byte entries * (partition size in bytes /$4000 bytes per cluster).
This of course is correct, but the problem is that you've hardcoded the partition size in your tool. If you correct that partition length for the 120 gb version (like i did in the small patch I suggested above), it all works
I think you've just overlooked that partition size when you released beta v6.BTW: tell Roofus that the tool was very well and 'clean' coded ! (allthough he probably knows that himself, hehe
) He sure knows what he's doing. Respect !Great Fix. worked 100% and I was able to copy all data from 20GB drive over to my 120GB without M$ cable.
Post by: TheSpecialist on May 11, 2007, 11:41:00 AM
However, i would like to stress once more that people using this mod do NOT use the 'image' facilities of xplorer360. If you want to do that, do it on your own risk (IMG:style_emoticons/default/smile.gif) I haven't looked at it in detail, but there's a chance that this might mess up your data. If you want to use the image function, I suggest you just wait for a new official release from Angerwound/Roofus.
So in short: just extract the contents of partition 3 (which contains all your data like gamesaves, video and music) and copy it to another hdd. That works perfectly and is probably all you want anyway. Enjoy (IMG:style_emoticons/default/smile.gif)
This post has been edited by TheSpecialist: May 11 2007, 06:56 PM
Post by: TheSpecialist on May 12, 2007, 02:33:00 PM
http://rapidshare.co...rer360.rar.html
This particular version won't work with the 20 gb though.
I've also added an option to dump the hddss.bin with, it's under the 'edit menu'. You can currently only dump hddss.bin, not save it back yet, might add that next week if there's still no official release from the creators
In that case, I might also release a version that works for all hdd's (20gb + 120gb) Image facilities work, but don't write a 20 gb version to a 120 gb hdd
I hope Angerwound/Roofus will release a fixed version within the next few days though, since it's way more work to create/add things without having the source code
Post by: zikronix on May 12, 2007, 02:40:00 PM
Post by: TheSpecialist on May 12, 2007, 03:14:00 PM
Just wanted to help out with a quick fix until they release their next version of this kickass tool (IMG:style_emoticons/default/smile.gif)
This post has been edited by TheSpecialist: May 12 2007, 10:15 PM
Post by: bigmac_375 on May 12, 2007, 04:27:00 PM
If you dont add some kind of support for this in xplorer, then please tell us how to manually hex it into the hdd! 
Post by: Antman1 on May 12, 2007, 08:38:00 PM
Post by: bigmac_375 on May 12, 2007, 08:43:00 PM
Post by: gurry on May 13, 2007, 09:58:00 AM
thanks
gurry
Post by: Antman1 on May 14, 2007, 08:27:00 AM
QUOTE(bigmac_375 @ May 13 2007, 04:19 AM)
well that wouldnt work because partition 2, where the emulator is, doesn't exsist on my drive. i would need to manually hex it in.
OK I believe I have a work around for the BEVs drive and partition 2, but it is not simple. I have been scratching my head wondering "What is everyone talking about?" Cause my partition2 is there and emulation works on my 120GB BEVs drive. Well I figured out why it does for me and not others! Here is what you would have to do. Warning though you will lose your data on the drive!
OK First off run the undo.bin your drive. Now use a hddss.bin from a 20GB drive with hddhacker v.91 and get it to be seen in explorer360 with the hex edit on the drive (Not xplorer360). You will have to use a unedited version of explorer360 cause the drive will be like a 20GB drive not the 120GB cause of the 20GB hddss.bin. Now restore your 120GB drive with a 20GB Drive image. Then test it in the 360 it should show up as the 20GB drive with all the 20GB data. Now your prolly saying this is pointless. Well nope it created partition 2 for you. now run the undo.bin once more and then use the hddss.bin from your 120GB drive! Then put it back in your 360 and it will show the wrong size with corrupted data and you will have to reformat. after you reformat the drive it will look normal. Now load the drive back up on your PC with explorer360 and you will have partition 2 now and the ability to do xbox1 emulation. Then just transfer your saves as previously stated by TheSpecialist from your 20GB drive to your PC and then from your PC to the 120GB drive. I am sure that if anyone can find an easier way than my method it will be TheSpecialist. If you have any questions feel free to ask.
Post by: bigmac_375 on May 14, 2007, 12:07:00 PM
Post by: NiceGuyJools on May 14, 2007, 11:50:00 PM
Post by: jokerbrazil on May 15, 2007, 04:58:00 AM
I found a Halo3 beta torrent 900mb on demonoid , but de files aren't .iso
JOKEr
Post by: bigmac_375 on May 15, 2007, 12:49:00 PM
also, you cannot just add partition 2 and expect it to update when you put a game in. You need all the files from partition 2.
unfort for me i dont have those files. (IMG:style_emoticons/default/sad.gif)
This post has been edited by bigmac_375: May 15 2007, 08:00 PM
Post by: TheSpecialist on May 18, 2007, 12:50:00 PM
This is the xplorer360 v6 pimped up by me to the 'extreme build 2' version, LOL.
First a disclaimer: this version might contain bugs and thus screw up your data if you save changes to it. Therefore, it is ALWAYS advisable to make a backup of the files on partition 3 first !! Also it is advisable to have a backup of the whole 20 gb original HDD.
What's changed from the original V6 version:
* Now works correctly with both 20 gb AND 120 gb drives
* Now also works on WD BEVS drives which don't have all the needed partitions
* Added option to dump hddss.bin
* Added option to dump partition 2 to image
* Added option to restore image to partition 2
Of course, this version was mainly done to give you guys an easy way to transplant the emulator, which resides on partition 2. Here's how to do it:
1. Attach your original HDD (20 gb or 120 gb) which contains the emulator
2. Run this new version, open HDD and choose "backup partition 2". This should create a 262 MB file.
3. Shut down the computer (so don't 'hot' swap the HDD !), replace the HDD with the WD BEVS and reboot
4. Open the HDD with this new version. To be safe, first double click on partition 3 and extract all files to a directory on your PC, in case something goes wrong with this new version.
5. After you've made a backup of those files, now choose "restore partition 2" and select the 262 MB file you've created in step 2.
6. Restart the xplorer360 tool to see the new contents on partition 2 !
That's it !
Oh yeah, last thing: in order for your new WD BEVS to get detected in this xplorer360 version, it needs to have the partition 3 on it. This partition will exist if you've formatted the HDD in the 360 before. If you have never had the WD BEVS in your x360, then first format the drive in your x360. After that, this explorer360 will show 'partition 1' (this means it's missing partition 2) and then you can restore partition 2, restart and then you'll see partition 2 and 3.
Enjoy !
P.s This is an 'unofficial' release. The original xplorer360 is done by Angerwound and Roofus, so big credits to them. I made the changes listed above, without their participation and without having the source code.
Post by: oldhouse on June 21, 2007, 01:09:00 AM
Post by: modz360 on June 22, 2007, 10:50:00 PM
and now when i hook up the 120gig to the 360 it says no memory found.....is there a way to recover this?
Post by: MickRick on July 06, 2007, 02:56:00 PM
Post by: innocuoussoul on July 12, 2007, 07:56:00 PM
Post by: mesurf on July 19, 2007, 07:48:00 PM
thx
Post by: BamberTwat on July 22, 2007, 02:41:00 PM
Anyone got an alternate link or able to host the file?
Post by: mesurf on July 23, 2007, 12:40:00 PM
http://forums.xbox-scene.com/index.php?s=&...t&p=3991790
Was easier than trying to find that file and now I am done with messing around with this and my 120gb BEVS works a charm even with halo2.
Post by: hydrasworld on September 08, 2007, 06:48:00 AM
http://www.x360-elit...w...=0
Post by: hydrasworld on September 08, 2007, 08:05:00 AM
QUOTE(hydrasworld @ Sep 8 2007, 02:24 PM)
i found a copy of xplorer360 extreme build 2 here:
http://www.x360-elite.co.uk/index.php?show...=0&#entry25
scratch that, it appears just to be beta 6, not the extreme 2, here's an extreme 2 one, tested before posting this time.
http://360hax.com/download.php?view.87
This post has been edited by hydrasworld: Sep 8 2007, 03:06 PM
Post by: hydrasworld on September 08, 2007, 10:57:00 AM
today i successfully installed a WD BEVS LAT drive in my xbox360.
I bought the drive from here:
http://www.scan.co.u...roductID=576184
120 Gb Western Digital WD1200BEVS Scorpio, 2.5", SATA150, 5400 rpm, 8MB Cache, 12 ms - £43.76
I backed up my old 20GB hdd (extracted all the files on partition 3 to a folder) and saved partition 2 to an image file using xplorer360 extreme build 2.
I grabbed HDDHacker 0.91. Edited it so that it worked with my NForce3 SATA ports, grabbed a 120gb bin SS and installed that on the HDD.
I then fired up my xbox360 with the new hdd connected up and formatted the drive.
then i reconnected it to my pc and restored the extracted files to partition 3 and restored the image of partition 2.
popped the hdd back in the 360 and everything appears to work ok apart from a couple of saved games. Notably viva pinata - you can see the game saves in the dash, but viva pinata complains that they're corrupt.
It looks like games that you can't copy to a memory card can't be copied to a new/larger/different hdd. Other game saves, games, demos, videos and music copied ok and xbox1 compatibility was retained.
If anyone has a fix for getting these saved games working again that'd be great! My guess is there's some additional checking done when the game save is loaded to see if it's being loaded from the device it was originally saved to.
@The Specialist, care to comment?
Thanks to everyone involved in HDDHackr and Xplorer360, I was able to buy a 512MB memory card and a 120GB drive AND still have £50 left over from the money that I would have had to use buying an original MS 120GB HDD!!! Awesome work.
Post by: megladon41 on September 16, 2007, 02:18:00 PM
will it?
Post by: fatcatfan on October 01, 2007, 07:03:00 PM
Post by: GringoDelToro on October 04, 2007, 05:05:00 PM
1) Can this definitely be used with the official 120GB M$ drive that comes with the elite system?
2) As I'm not too keen on cracking open my xbox or the drive just yet does anyone know if this program works with the X360 USB device?
I read a tutorial somwehere on transfering old original xbox game saves over to the 360 so it'd be really useful!
Post by: Robban98422 on October 06, 2007, 08:53:00 AM
if i use this program and release my hardrive from the console and put it in my computer can i add the image of the games on the hardrive then
or what is the point?
Post by: fatcatfan on October 08, 2007, 09:16:00 PM
QUOTE(GringoDelToro @ Oct 4 2007, 07:41 PM)
Sorry I'm probably being incredibly dense but I just wanted to ask a couple of questions:
1) Can this definitely be used with the official 120GB M$ drive that comes with the elite system?
2) As I'm not too keen on cracking open my xbox or the drive just yet does anyone know if this program works with the X360 USB device?
I read a tutorial somwehere on transfering old original xbox game saves over to the 360 so it'd be really useful!
Post by: MoxPearl on October 29, 2007, 08:34:00 AM
Hard Drive is a 120gb Western Digital Caviar...
I get the FATX error everytime i try
any ideas ??
Post by: JB4000 on December 01, 2007, 11:40:00 PM
thanks
Post by: henriquelm on January 04, 2008, 05:32:00 PM
Thanks for the help.
Post by: fitsman on January 16, 2008, 05:20:00 PM
A lot of thanks.
Post by: aotta on January 27, 2008, 06:39:00 AM
i've bought an original (?!?) xbox360 hard disk of 120mb but it hasn't the partition 2 even after i update with backward compatibility.
Now i've manually added the partition 2 with the Specialist instruction, but i've not another hd from wich restore the partition 2 (the emulator one).
Can anyone upload his one for me, or indicate somewhere from download it?
thanks.
Post by: FortunaEnterprises on February 01, 2008, 10:09:00 AM
Im kind of new to this. I was able to get this program to work and get my PC to see the drive. I want to add my own Videos, Pictures, and Music to the 360 drive. I can import files but the 360 dont know what they are. I assume I have to convert them first and add them to special folders. Can any one help please?
Post by: Flyinace2000 on March 05, 2008, 01:45:00 PM
Post by: brando56894 on March 19, 2008, 03:04:00 PM
Post by: scuba156 on March 19, 2008, 03:25:00 PM
Post by: brandonbigdog on March 22, 2008, 01:35:00 PM
QUOTE(Flyinace2000 @ Mar 5 2008, 02:21 PM)
how long should a extract of partition 3 take on a 20 gb drive? Mine has been going for 3 hours and only has 8.3gb done.
I am having the same issue, I tried to extract partition 3 and it ran all night and it only copies the cache folder(only 18.8mb), any insight.(tried in both xplorer360 and extreme 2 with original 20gb drive)
Post by: brandonbigdog on March 22, 2008, 11:17:00 PM
QUOTE(brandonbigdog @ Mar 22 2008, 01:11 PM)
I am having the same issue, I tried to extract partition 3 and it ran all night and it only copies the cache folder(only 18.8mb), any insight.(tried in both xplorer360 and extreme 2 with original 20gb drive)
also it never seems to end(the folder dumping) i have let it run for half a day now and still nothing. I am able to image the drive, but i still cant even extract part. 3 from it either.
Post by: com walk on March 24, 2008, 11:16:00 PM
Post by: Boobers on March 25, 2008, 06:08:00 AM
QUOTE(brandonbigdog @ Mar 23 2008, 01:17 AM)
also it never seems to end(the folder dumping) i have let it run for half a day now and still nothing. I am able to image the drive, but i still cant even extract part. 3 from it either.
Count me in as to having the above problem as well..
My 360 HD is connected to my PC via Xecuter's 360HD Dongle. I was able to image Partition 2 from a 20 gig and apply it to a 120G bev using Extreme 2 Xplorer360 with no problem. But when I tried to apply the Part 3 image, it hangs. Ran all night and only made it to 5 "bars"... I had read that you can't do an IMAGE, you must extract the files. I tried that first and got a "cannot write cluster somethingID out of range" error..
Thinking that the 360HD Dongle might be to blame, I pulled the HD out of the case and did a direct connect to the SATA card (VT6421A). It's been running about an hour and is at 6 bars.. I'll let ya'all know if it works..
B
Post by: Boobers on March 26, 2008, 01:28:00 PM
QUOTE(Antman1 @ May 11 2007, 11:38 AM)
Great Fix. worked 100% and I was able to copy all data from 20GB drive over to my 120GB without M$ cable.
M$ Cable???
Are you saying that you can hook up two 360s together via a Cat-5 Crossover cable and copy the HD that way???
B
Post by: SoulHeaven on April 08, 2008, 03:45:00 AM
I'm trying to consult files on a 360 Debug HDD, but I see ONLY Partition 0 and not others.
Anyone have a solution ?
Thanks
Post by: Qbox2006 on April 11, 2008, 03:56:00 PM
The whole reason I got the device and app was so I could backup my 100% Assassin's Creed savefile and beat the game again in order to get the notorious 'Conversationalist' achievement. I was able to restore my original savefile after I did what I had to do and all is well.
I found the 'Beta 6 Extreme 2' version of the app over at Technofranki's website. Browse to the bottom of the page to find the link: http://technofranki....ddrive-and.html
Good luck to all of you and remember never to resign gamesaves and store them as your own.
lol If anyone has any problems, let me know.
Post by: BasicAir on May 31, 2008, 05:41:00 PM
I need help really bad. I have downloaded Xplorer Beta 6 and I want to use it with my 512 MB memory card.
When I click to open a memory card, it says "Could not find a FATX drive to open"
I think I am in need of 2 inf files is that right? If so, where can I get them please? If not, then what am I doing wrong?
Please help... All I am trying to do is to get 1 gamesave on my hdd to this memory card. I am in desperate need for this 1 save.
Help!
Post by: BasicAir on May 31, 2008, 05:38:00 PM
I can now browse my 512MB memory unit in Xplorer. I haven't tried writing to it yet but I'm sure I can be problem-free now. Thanks anyway.
Post by: ch40s on June 08, 2008, 12:37:00 PM
now i can switch the 360hdd between x360 and pc..BUT
the only reason i actually bought the scorpio was to put music and hd-wmv on it..
i put music on the hdd but the 360 doesnt show it, and obviously the fatx system cant handle files larger than 4GB, so wmv-hd is not possible also...(of course the hdd is made compatible with hddhackr...it is recognized and fully functional for xbox live content)
is there any way to put music or videos on the 360 hdd ??
(do i need a profile saved on the hdd...because i just got a core version and all my profiles are on the memory unit..)
thanks
This post has been edited by ch40s: Jun 8 2008, 07:38 PM
Post by: caliberc on June 10, 2008, 08:33:00 AM
srry for being a bit offtopic
Post by: Isaac356 on June 26, 2008, 12:03:00 AM
Stoner of 360hax.com hinted on his guide that Xbox 360 music is just a standard .wma file with a custom header. I tried to look into this some more and found this page saying that the Xbox 360 rips WMAs at 192 kbps. Supposably it has a sample rate of 41000 Hz, I don't remember where I read this, though. I opened up a file ripped by my Xbox 360 via Xplorer360 in a hex editor. Here is what I saw:
0x00 - 0x0C: The very first thirteen bytes are the same for every file (that I have): 46 4D 49 4D 00 00 00 01 00 01 00 01 00
0x0D: The Song Title, padded with zeores (ex. F.a.n. .t.h.e. .F.i.r.e is 46 00 61 00 6E 00 20 00 74 00 68 00 65 00 20 00 46 00 69 00 72 00 65), and followed by zeroes
200x0D: The Album, padded with zeroes and followed by zeroes
400x0D: The Artist, padded with zeroes and followed by zeroes
600x0D: Artist again, same format
800x0D: The Genre, padded with zeroes and followed by zeroes
A00x0D: Genre again, same format
C00x0D: This looks like where the WMA audio stream starts.
Tomorrow, I may try replacing the data at C00x0D to the end with a different WMA, to see if it plays on my Xbox 360. (I have to find where the actual audio stream starts in a real WMA file first
) If this works, maybe someone (not me, I have next-to-no programming experience) can make a simple GUI to write files with this specification.
Post by: Bannedfromlive on June 28, 2008, 08:25:00 PM
This post has been edited by Bannedfromlive: Jun 29 2008, 03:25 AM
Post by: pyongftw on June 30, 2008, 01:43:00 PM
Post by: cavedweller on July 31, 2008, 07:41:00 AM
Here is the situation. We have two HDD, one 20GB and the other 120GB. I was testing with the 20GB drive, made a full image of the drive. After that, I didn't notice that my brother swapped the drives on the console, I didn't check or anything, I when I got back home, I just restored the 20GB image on the 120GB console.
As the sh*t is done, I'm just asking if there is anything possible to save the drive, since it's not working on the console anymore, but Xplorer360 can still acess all the data on it.
Post by: foaley77 on August 01, 2008, 05:47:00 PM
Post by: foaley77 on August 02, 2008, 08:21:00 AM
Post by: GamerBR on August 03, 2008, 06:04:00 PM
Has anyone have any idea how I solve this issue?I think I will have to buy a memory card just to transfer all my data,the program just doesn't work,I also tried several times reformatting it and undo the flash and doing it again.
Post by: GamerBR on August 03, 2008, 08:35:00 PM
Post by: GamerBR on August 04, 2008, 06:37:00 AM
Post by: foaley77 on August 04, 2008, 07:05:00 AM
Post by: Phe0nix on August 09, 2008, 12:37:00 AM
454107Db ( Main save directory )
1000001 ( Sub Dir ) ( number maybe little off )
ProfileID ( File ) ( Acutall game save file )
NOW I SEE
451007b ( Directory ) ( Now when i transfer this directory the 360 doesn't see the save anymore )
11540F4914CA ( Subdirectory )
dateinfo.xbx ( File )
TitleImage.xbx ( File )
TitleMeta.xbx (File)
I am now thing it may be due to the newer software that has changed, gamesaves don't get broken down into
files and now stay 1 whole image file of the oringal save. It used to work for me when i transfered a Main Directory with a Sub Directory including 3 files .
Post by: raVemjr on August 09, 2008, 05:25:00 AM
I've tried it on Vista both with and without admin rights, also tried it on XP, still to no avail.
Any suggestions?
Post by: cavedweller on August 11, 2008, 09:55:00 AM
QUOTE(raVemjr @ Aug 9 2008, 09:01 AM)
I'm having trouble copying files to my PC. I managed to make an image with Xplorer, but if I want to copy Partition 3 files, it freezes with one of two errors: either 'cylinder out-of-bounds' or 'recursive folder creating something'.
I've tried it on Vista both with and without admin rights, also tried it on XP, still to no avail.
Any suggestions?
Try transfer less folders at a time. Specially the larger ones.
-----
I'm with a very specific question now. I just bought an Xbox 360 Elite, and a Memory Unit, to transfer the saved games from the old 20GB to the new 120GB Drive. Everything smooth, except that I can't copy the likes of Forza 2 and Viva Piñata (Well, screw VP, I just want Forza 2 anyway...), as the system informs that those itens cannot be transfered between memory devices.
Sooooo... I was thinking about to transfer the game folder from the 20GB to the new 120GB drive, but, will it work? I mean, is Forza 2 gamesave protected so it will only work with the drive that it was originally created?
Better ask than brick another 120GB drive (see last page).
Post by: thr4773r on August 11, 2008, 11:00:00 AM
QUOTE(cavedweller @ Aug 11 2008, 11:31 AM)
Better ask than brick another 120GB drive (see last page).
Drive may not be bricked. If explorer360 can see it and write to it, its not.
Oh, and PM in box.
Post by: luv2rocku on August 11, 2008, 03:42:00 PM
QUOTE(foaley77 @ Aug 4 2008, 02:41 PM)
I have done 5 of these 120gb drives today but my drive and another only show 1 partition which is Partition 1 when it should be 0,2,3 has this happened to anyone before? these drives work fine it the 360 though.
same here i have 20gb backup on my pc now i want to transfer that data to 120gb but all i can see is partition 1, have u found any solution yet.
Post by: wiredworm on August 26, 2008, 09:42:00 AM
My broken 360 has just returned so i've finally managed to complete my attempt at moving from a 20GB Xbox 360 drive to a 120GB model.
I purchased the required WD Scorpio drive a week or so ago and i'd already used the HDDHackr tool to patch the drive.
I've now formatted the drive on the Xbox but strangely when I put it back into the PC and launch Xplorer360 I found that only the first partition was visible. I've found another article on teh interwebs which describes creating the partition tables by using WinHex so i've done this.
I've now ended up with Partitions 0, 2 and 3. Number 2 i've restored using a modded version of Xplorer 360 (the version which lets you restore the whole partition from a .bin file). I'm now dragging and dropping the files for Partition 3 into the drive.
Does this sound correct? Is the numbering correct - 0, 2 and 3?
I really just want confirmation that everything is in order. For now i'm going to boot the 20GB drive - i'll test the 120GB drive later. Am I correct in saying that so long as there's no dashboard update the only partition that would need copying again is Partition 3?
Post by: thr4773r on August 27, 2008, 12:49:00 PM
What do you mean about a dashboard update? The fall one?
Right now, nothing else is needed from your hd. In the fall of course, your hd games will go there!
Post by: sniper33 on August 28, 2008, 08:59:00 AM
but i didn't find program for convert xbox-music with strange header of wma file....
i was rip 50CD to XBOX and i think i can copy wma to my comp...but i only have a file 001 002 ... and so on in media folder...
is there any way to convert that music to normal wma?
Post by: sniper33 on August 28, 2008, 11:34:00 AM
QUOTE(Xbox-Scene @ May 5 2007, 08:33 AM)
A new version of Xplorer360(<a href="http://www.xbox-scene.com/xbox360-tools/Xplorer360.php">info</a>), a tool to
cool! now i can see 3rd partition on my 120gb hdd
but i didn't find program for convert xbox-music with strange header of wma file....
i was rip 50CD to XBOX and i think i can copy wma to my comp...but i have only a file 001 002 ... and so on in media folder...
is there any way to convert that music to normal wma?
Post by: Tutting4 on September 03, 2008, 07:14:00 PM
Post by: SimplexPL on September 26, 2008, 07:04:00 PM
Post by: mcp33pants on September 28, 2008, 03:04:00 PM
Post by: SimplexPL on October 06, 2008, 03:00:00 AM
Sometimes the process hangs or loops (i had infinite loop on content folder) so try extracting one (sub)folder at a time.
Post by: jeckel20003 on October 07, 2008, 08:42:00 PM
Post by: thr4773r on October 07, 2008, 11:21:00 PM
QUOTE(jeckel20003 @ Oct 7 2008, 10:18 PM)
I'm new to all of this 360 HDD stuff. I'm wanting to upgrade from my 20gb drive to a 120gb drive I have laying around. I can't find instructions anywhere on how to use this program. Can someone please point me in the right direction?
Read the tutorials on hddhackr here or just go to the forum and look down a few lines. hddhackr has about 32 pages of info and questions for its latest release.
Post by: deepblue2000 on October 08, 2008, 12:12:00 PM
today I replaced my 20gb with an 120gb hdd, all worked fine but Xplorer360_extreme2 doesnt work for me.
I am using vista 32bit and with the old 20gb all worked fine (when I start Xplorer360 as admin), but when I start Xplorer360_extreme2 as admin, I can only see Partiton1, Part2 and Part3 are missing.
Whats wrong with it ?
any ideas
Post by: exiled350 on October 19, 2008, 08:20:00 PM
Post by: DemonI81 on October 20, 2008, 03:00:00 PM
Post by: DemonI81 on October 25, 2008, 10:32:00 AM
Post by: hanggoroz on November 05, 2008, 07:40:00 AM
QUOTE(TheSpecialist @ May 11 2007, 04:53 AM)
I did a little analysis of the xplorer360 tool and found a way to make it compatible with my 120 gb BEVS. Here's how to do it in 2 steps:
1) First add the missing partition manually starting at byte 0x80000 of your WD BEVS. You need to make it look like:
58 54 41 46 00 00 00 00 00 00 00 10 00 00 00 01
So, the easy way to do this: open your drive with winhex( http://www.x-ways.net/winhex.zip ) by pressing F9, select your WD BEVS drive, press <ALT>+G, use position 80000 (hexadec) and then edit these 16 bytes starting at 0x80000 to look like above. Save it, restart the xplorer360 Beta 6 and the FATX error should be gone and you should see 2 partitions now. However, there'll be no data shown yet.
2) To get the data shown, exit xplorer360 and fire up your hexeditor again, but this time open the xplorer360.exe itself with it. Make sure you're using the beta v6 version. At offset 0xF0C2 you'll find:
68 77 03
You need to change these 3 bytes into:
00 C2 1A
Save it (make a backup !), restart it and you can now see the contents of the WD BEVS 120 gb, at least I can
BTW, this 'hack' won't work with the 20 gb version, so it's best to make a backup of the xplorer360.exe and use the 'unhacked' original version if you want to access a 20 gb hdd !
BTW2: There's no guarantee this will work, it worked for me, but it might not work for you. This xplorer360 hack might result in loss of data on your HDD, so make sure you're testing it on a clean WD BEVS and not one which contains a lot of important data
Please give me feedback on results
Hi I've tried the steps but got stumbled when I was going to hexedit the drive.
As I select the drive to be hexedit, an error message appear and I got nothing but zeros in the hexedit display.
When I try to read it using xplorer360 beta 6, I got an error message and when I tried to read it using Xplorer360 extreme 2, only partition 1 showed up.
Can you please tell me what did I did wrong.
Thanks!!!
Post by: johnnyrico on November 14, 2008, 07:07:00 AM
Post by: LoXodonte on November 18, 2008, 08:25:00 PM
Post by: johnnyrico on November 19, 2008, 10:03:00 AM
xplorer360 still didn't work though. but my problem was solved: migrating my xbox1 saves to 360
Post by: LoXodonte on November 19, 2008, 10:13:00 AM
As a temporary work around I've used xplorer to transfer files out of my last 20 gig image to a memory card, and then transfered that to my new 60 gig. Of course I'm missing tons of content as I just pulled over a few game saves. Can't blame xplorer360 on this...but xport360 says it supports 60gigs and obviously does NOT. In fact, even on my old 20 gig I used explorer360 because it was far more stable.
Post by: johnnyrico on November 19, 2008, 12:26:00 PM
Post by: LoXodonte on November 20, 2008, 11:37:00 AM
Post by: fitsman on November 30, 2008, 07:03:00 AM
Does anyone fix all the bugs that has this program?
And another think is why in the partition 2\Compatibility\tdbx i can't dumb it out(It contentiously repeat the dumbing bar trying it to extract the folder) from my original 20gb hard disk?
A lot of thanks
Post by: johnnyrico on November 30, 2008, 12:11:00 PM
QUOTE(LoXodonte @ Nov 20 2008, 08:13 PM)
by worked do you mean it was detected by windows, you could view its contents, could transfer data to it, or all of the above? What application did you use?
it worked in windows, could view it contents and transfer data in windows when hooking it up to a native sata controller(intel) instead of eSata on my desktop, worked with the datel Xport software.
xplorer360 didn't work though.
my advice is: use xport.
Post by: hellbelly on November 30, 2008, 04:22:00 PM
Just wondered what make hdd you other people having trouble with 60gb drives have?
ta
Pete
Post by: hellbelly on November 30, 2008, 04:52:00 PM
QUOTE(hellbelly @ Dec 1 2008, 01:58 AM)
I can't get any version of xplorer360 to work properly with my 60gb drive. My PC detects it as an Hitachi drive, partition 3 shows up as empty even though it's not, if I put something on it then my 360 doesn't recognise it.
Just wondered what make hdd you other people having trouble with 60gb drives have?
ta
Pete
should have said - the latest xport (v1.12) detects the drive, but freezes when I select it
Post by: fitsman on December 01, 2008, 02:46:00 AM
Post by: johnnyrico on December 04, 2008, 02:24:00 PM
second: this is a free homebrew program, you should be happy it even exists.
the writer of it still has a living to make or studies to complete, he can't continuously write code just because you want him to.
This post has been edited by johnnyrico: Dec 4 2008, 10:27 PM
Post by: v_lestat on December 04, 2008, 11:09:00 PM
flashed the drive... ok
formatted in my 360... ok
tested with a game.. game saves good and visible in the dashboard as a good game save.
107gb space.... ok....
hook the hard drive up to my VIA controller.... boot into windows... DOH!!! fatX error!!
windows sees the drive,,, ok
via controller ok (works in dos to flash the drive)... ok
guys i have seen countless people not able to make the 120gb drives work,, WHY???
i have done this with 2 other drives with NO issues.. ok it was quite a while ago so i bet i am forgetting something but i dont think so...
whats the deal,,,
also when i first tell xplorer360 to open the drive i can here the WD BEVS make a very faint clicking noise as if its locking itself...
so i put the drive back into the 360 and everything is ok...
but xplorer360 will NOT see the drive... whats going on fellas..
p.s.
i made a backup of my 20gb drive 100% perfect, no problems. all 3 partitions saved.
This post has been edited by v_lestat: Dec 5 2008, 07:15 AM
Post by: fitsman on December 05, 2008, 10:10:00 AM
QUOTE(fitsman @ Nov 30 2008, 09:39 AM)
Hi.
Does anyone fix all the bugs that has this program?
And another think is why in the partition 2\Compatibility\tdbx i can't dumb it out(It contentiously repeat the dumbing bar trying it to extract the folder) from my original 20gb hard disk?
A lot of thanks
Does anyone fix all the bugs that has this program?
And another think is why in the partition 2\Compatibility\tdbx i can't dumb it out(It contentiously repeat the dumbing bar trying it to extract the folder) from my original 20gb hard disk?
A lot of thanks
johnnyrico I just made a question i don't want to offend anyone. Why you attack me...
And the second part of my preview post doesn't anyone knows what exactly is the use of the "tdbx.db" thar is in the folder "partition 2\compatibility\tbdx\"
If i delete it from the original 20gb hard disk or if i don't put it to my new modificated western digital bevs scorpio 120gb hard disk is there a change to have any problem?
A lot of thanks for your time and for your answers.
Post by: v_lestat on December 05, 2008, 06:57:00 PM
BUT
using xbplor360 beta6 when i put the individual files on the hard drive from my original drive. (i extracted each partition) everything goes ok, nothing hangs, but when putting the hard drive back in the 30, 1 time it said only 14gigs free, and saw no game saves, or profiles, or anything. another time it saw 30gigs free, no game saves, profiles, etc etc....
whats going on guys, do i need to hex edit this drive like i saw a few pages ago ?
I am VERY confused as to why this is happening.
i tried another 120gb BEVS drive that i use in my unmodded 360 and everything works great....
but this new one,,, weirrrdddd
Post by: paingel5jpg on December 12, 2008, 02:48:00 PM
Post by: xlcasslx on December 12, 2008, 06:36:00 PM
QUOTE(paingel5jpg @ Dec 12 2008, 05:24 PM)
Any word on when 60GB support might be coming? I'm sitting on a 60GB drive and a 20GB image.
This^
Post by: hellbelly on December 14, 2008, 05:48:00 AM
Pete
Post by: fitsman on December 22, 2008, 09:18:00 AM
If it doesn't where i find a version that support it.
A lot of thanks for your time.
Post by: R.J.G.C.B on December 23, 2008, 07:13:00 AM
I know this an workaround to my problem that i wouldn´t mind using at all but the slowness makes a big disadvantage compared the way i use to do: transferring thru DVD/CD.
I say that is a workaround because i know that the pen should work with fat32 without any problem and because i know that XBMC reads Fat32 and besides the pen being part the compatible lists (only difference is the last number of the model number.) there also this post http://blog.xbmc.org/forum/showthread.php?t=30771 where they say most work and the only difference is also the last number of the model number.
This post has been edited by R.J.G.C.B: Dec 23 2008, 03:15 PM
Post by: Matrixsoul on January 05, 2009, 08:59:00 PM
This too^
I can see partition 3 of my 60gb in xport 360 v1.12 but can't transfert any files ( too buggy )
Post by: jb_008 on January 07, 2009, 11:17:00 AM
QUOTE(TheSpecialist @ May 5 2007, 09:50 PM)
Well, to get a 20 gb WD BEVS recognized in xplorer360, you can edit sector 1024 (=0x400) = byte 0x80000. You need to make it look like:
58 54 41 46 00 00 00 00 00 00 00 10 00 00 00 01
So, the easy way to do this: open your drive with winhex( http://www.x-ways.net/winhex.zip ) by pressing F9, select your WD BEVS drive, press <ALT>+G, use position 80000 (hexadec) and then edit these 16 bytes starting at 0x80000 to look like above. Save it and then xplorer360 will work, at least with the 20 gb version
Not sure if this will do the job for the 120 gb version, haven't tried this myself yet.
Thanks, would be great if your nice tool would standard have WD BEVS support too.
Regards,
TS
OK, got this to work, but I can't see partition 2. Is there any fix for that?
Post by: fitsman on January 09, 2009, 10:49:00 AM
A lot of thanks.
Post by: chenzhuops2 on January 09, 2009, 03:27:00 PM
Post by: kbl2 on January 10, 2009, 03:03:00 PM
I'm having one of the newer xbox 360 (Liteon dvd) with a HDD 60gb Toshiba MK6052GSX.
I've tried 5 xplorer360 versions (dont know if they were all different) and 1 xport360 (v1.2)
The xplorers allow me only to read partition 2 and sometimes partition 3 (strange characters).
In Xport360 i can read all partitions but still strange characters in partition 3 and when browsing the directories the software freezes or crashes.
I'm using SATA VIA 6421 and a team xecuter hdd adapter that came with the CK3.
-Is there a hex edit for the 60gb toshiba drive?
-who has had success with a 60gb toshiba drive ?
if yes:
-which software?
-which hardware?
Post by: fitsman on January 11, 2009, 02:13:00 AM
Post by: fbane on February 04, 2009, 03:42:00 AM
Anyone have any ideas how to fix this?
Post by: sonknuck on February 05, 2009, 07:37:00 PM
QUOTE(exiled350 @ Oct 19 2008, 09:56 PM)
is it possable to recover deleted data from a memory card with this program? The data hasn't been overwriten.
I'm also wondering if there is a way to recover a deleted gamesave, but not from a memory card. I deleted it from my 120gb hard drive. Is there a way to use Xplorer360 to recover the data?
Post by: Kane65 on February 13, 2009, 05:12:00 PM
Post by: NYCXBOX on February 02, 2020, 04:24:00 PM
Thanks!
Post by: Z3ro3X on March 08, 2009, 05:42:00 AM
Post by: Basscadet on March 08, 2009, 05:46:00 AM
just yesterday I upgraded my LiteOn 60GB xbox to 1.5.1 and thought I'd try the HD connectivity kit that came bundled with the one for connecting the drive (both from diygadget). I've used all versions of explorer360 and the one modified by Datel called xport360 but all I get is a few subfolders in Partitions 1 & 2 and a great big empty Partition 3. I don't have an xbox live account so I only downloaded the dashboard update (new experience) and copied GTA IV on HD to play from there. Problem is, even if I can create new folders, copy files etc I still can't see anything on Partition 3. Tried connecting this drive to all 4 SATA Ports (ASUS M/B with Nvidia chipset) as one specific port used to work a lot better than the others when flashing drives, still no change. Any ideas?
Post by: lucifur2k on March 13, 2009, 08:36:00 AM
Post by: bigred2543 on March 15, 2009, 11:01:00 AM
backed up my 20gb to an image and restored it to a 120..and now the 360 doesnt see it or any of my data
Post by: LoLawes on March 29, 2009, 01:16:00 PM
Post by: hitmanRE on April 28, 2009, 06:22:00 PM
Im trying to transfer my data from my 20GB original Harddrive to a 120GB harddrive that is the BEVS series.
I did the HDDHACKr thing and it works but now i need to trasnfer data from the old 20Gb to my new 120GB
Post by: dangal on April 29, 2009, 01:42:00 PM
Can i use this soft to take one?
Thanks a lot
Post by: MonkeyIsle on May 16, 2009, 11:05:00 PM
Post by: enrique66_35 on May 19, 2009, 03:16:00 AM
I have a 60GB Hitachi drive and after some unsuccessful back and forth with Codejunkies support they released Xport version 2.06 (download from official website codejunkies.com) which detected my drive.
I should warn that it's a bit buggy but at least it works!
Post by: washkow on June 15, 2009, 11:46:00 AM
thanks!
andy
Post by: washkow on June 16, 2009, 07:15:00 AM
thanks!
andy
Post by: crackerboy on July 23, 2009, 07:53:00 PM
But now when I try to play rockband I get an error that it stopped loading because of an unknown
error. I believe the answer is to get a memory unit, hook up my old 20gb and move the data from the
20gb to the MU to the 120gb drive.
If there is another way to do it let me know...I tried searching but I must be searching for the wrong terms.
I know it has been mnetioned that other people are having issues with it but I haven't seen a definate answer
that there is no way to fix it....or a definate way to fix it.
Post by: etnmich on September 13, 2009, 06:11:00 AM
I have one question about this application: Should there be a Partition 1? I can see partitions 0, 2 and 3 in Xplorer360 but they don't contain saved games, themes or other stuff. Both partition 0 and 3 are empty and 2 has Xbox360 system files. Partition 2's index-file does point to Partition 1 though. (Files in \Device\Harddisk0\Partition1\...)
Edit: Never mind the last part. Extreme2 edition shows the files on partition 3.
This post has been edited by etnmich: Sep 13 2009, 01:15 PM
Post by: burley on October 11, 2009, 03:13:00 AM
Been looking for some support on accessing my 20gb hdd. So far I haevn't been able to do it.
I have both a XENO and a CK3 hdd connectivity kit, a sata card and internal sata. Both work fine with xbox360 dvd drives.
I own a 20gig hdd, which I'm unable to acces and a 120 gig drive which I am able to acces.
When I hook up the 120 gig drive and boot my pc all is well, the pc boots to XP and detects the drive (using the xeno adapter). Just using sata and molex, no usb. I can acces it using xplorer360, no problem at all.
However when I hook up the 20gig drive and boot my pc, it freezes at the bios. If I hook it up after the bios, the pc freezes again and won't go into xp. If I hook it up after booting, everything looks fine. BUT Xplorer360 gives the error code "Could not find a fatx drive to open"
I have no clue what to do here, tried it every way I know and back, but somehow I'm just unable to connect and acces my 20gig drive. It doesn't matter if I use sata & molex or usb & sata & molex, XENO or CK3.
Does anybody have a clue what I'm missing here? Or what to do?
THX in advance!!
Post by: Swahili on November 03, 2009, 01:48:00 AM
Post by: CamGT on February 03, 2020, 12:19:00 PM
Post by: maaadkat on January 23, 2010, 07:22:00 AM
My 360 Elite just came of age (12M) so I thought I'd backup the entire hard disk to my PC just in case the worst comes to the worst and I have to replace it.
So I carefully disassembled the disk box, took the disk out, hooked it up to the PC with a SATA/USB adaptor, and fired up Xplore360.
Got 3 partitions - 0, 2, 3. 3 was full of garbage. Closed the app. Reopened it, opened the disk again. Partition 3 was missing. Read the comments, couldn't figure out why the hell someone would release an app that was compatible with 3rd party Western Digital disks and not Fujitsu disks that come with the XBox, and put the disk back on the console.
Now it says the disk is unformatted. Goodbye to all my data.
Nice. Real fecking nice.
Can someone point me to some specs for the partition schema so I can fix it by hand??
Post by: DarkCowMoo on January 25, 2010, 01:03:00 PM
This cable Link to ebay
Post by: Spegs12 on January 26, 2010, 06:43:00 PM
Post by: CLK Rebellion on December 31, 2010, 09:47:00 PM
QUOTE(gambino90 @ Dec 31 2010, 06:23 PM)
When will it work for my USB drives and also the new xbox 360 250GB hard drive? I really want to modify my game save data.
Where's the older versions?
I don't think Xplorer is in development any more.
Post by: kmplsv on January 13, 2011, 04:02:00 PM
QUOTE(CLK Rebellion @ Dec 31 2010, 10:47 PM)
I don't think Xplorer is in development any more.
Is there a decent substitute or are most folks just using the last version of Xplorer360 still?
Post by: CLK Rebellion on January 13, 2011, 05:38:00 PM
QUOTE(kmplsv @ Jan 13 2011, 03:02 PM)
Is there a decent substitute or are most folks just using the last version of Xplorer360 still?
A lot of people still use the latest version of Xplorer, except most people like the fact that Xport shows game names and whatnot, or they use a thumb drive which Xplorer/Xport don't do.
HDD Explorers: Xport, Xplorer, Party Buffalo
USB Explorers: Party Buffalo USBFATX
Post by: C-COOP on February 01, 2011, 05:30:00 PM
QUOTE(CLK Rebellion @ Jan 13 2011, 05:38 PM)
A lot of people still use the latest version of Xplorer, except most people like the fact that Xport shows game names and whatnot, or they use a thumb drive which Xplorer/Xport don't do.
Does anyone know where I can find a copy of Xplorer 360 Extreme 2? Seems every copy I find has a virus. Or maybe one of you kind souls could just email it to me: c-coop at shaw.ca
Post by: CLK Rebellion on February 01, 2011, 10:06:00 PM
QUOTE(C-COOP @ Feb 1 2011, 04:30 PM)
Does anyone know where I can find a copy of Xplorer 360 Extreme 2? Seems every copy I find has a virus. Or maybe one of you kind souls could just email it to me: c-coop at shaw.ca
I think I have it, check your email.
Post by: resevil83 on April 12, 2011, 11:16:00 AM
I was wondering if someone could help me out. I have gotten xplorer 360 extreme2 to work to a certain point. I have been able to see all partitions and I was able to save a backup image to my pc. I was very pleased with this, however I am trying to do something a bit more difficult and wanted to know if it was possible. Note: I have read all the tutorials and watched all the videos on youtube and I still don't get it.
At any rate, I want to take game saves off of my 20 gig hard drive put them on my pc, and then transferr them to my new 120 gig hard drive. (just got a new xbox 360) Is this possible? Can someone explain what the saves are? I am getting so confused with all the folders and numbered files. If this is anyway possible please guide me!