Post by: Elf_Sniper on February 14, 2005, 08:22:00 PM
Xodus S.P. and Xenium S.P.ICE
We are proud to announce the launch of our new, truly universal solder less adaptor the Xodus S. P. (Solderless Pro) adaptor. S.P. is the first (and only) truly universal adaptor designed to work on ALL currently existing Xbox versions and with all LPC based chips. Which support the Xodus protocol of wiring D0 control to pin 4 of the LPC. (All 4th Gen chips except earlier SmartXX versions)
Xodus S.P. -Recommended Retail Price: $ 29
SPICE UP YOUR LIFE!
For a limited time only we are offering a special bundle package, Xodus S.P. and Ice (SPICE) for an incredible price of only $69.
Xodus SPICE -Recommended Retail Price $ 69 ONLY
Here are some key features, that once again re-affirm our commitment to groundbreaking innovation, leadership and total dedication to safety, ease of use and quality products for you, the end user.
1.Works with ALL known Xbox versions to date (no need to check your version first)
2.No soldering required at all. Period.
3.Installs in seconds.
4. Unique precision engineered acrylic template for wire guide and safety feature.
5. Instant verification of correct contact on all five points through LED indicators (not for decoration only)
6. The only fourth gen., fully solerless DIY system offering such flexibility and compatibility available to date
It is important to note that as the original inventors of the solderless install system, the basic requirements for a DIY unit have not changed and is what we have consistently worked to provide. We understand the desire for a hassle free solderless unit with no need for concern over Xbox version, install difficulties, mechanical failures, or unsafe connections, and which is completely fool proof. Such an adapter is, and always will be, a must for users who do not want to solder.
Book your Spice pack from your favorite retailer early to avoid disappointment.
For trade enquiries, please contact us. [email protected] (remove the nospam part)
Post by: Gumba on February 14, 2005, 10:32:00 PM
QUOTE(Elf_Sniper @ Feb 15 2005, 03:28 AM)
From TeamXodus.com
-
Title: 1.6 Adapter Is Here!
Post by: Misfit111 on February 14, 2005, 11:38:00 PM
-
holy crap, this is truly amazing! the whole package for only 69 bucks?!!!?!!? i spent 73 on a solderless package w/ shipping, amazing, truly amazing xodus, and only 30 for the adapter? people were saying it was going to be AT LEAST 50, wow, im shocked, this is awesome
-
Title: 1.6 Adapter Is Here!
Post by: member1521 on February 15, 2005, 04:53:00 AM
-
Yeah where can I buy one from, or at least put one on order??
-
Title: 1.6 Adapter Is Here!
Post by: tutyet on February 15, 2005, 06:32:00 AM
-
its evem compatible with the xecuter 3 thats a really good profuct they have there!
-
Title: 1.6 Adapter Is Here!
Post by: mkulrey13 on February 15, 2005, 09:07:00 AM
-
Where can i get this 69$ special. I checked all the retailers and none of them have it on there site? Anyone have any info?
-
Title: 1.6 Adapter Is Here!
Post by: Zeosstud on February 15, 2005, 12:51:00 PM
-
Could anyone confirm is the executor 2.6ce is considered a 4th generation chip and therefor compatible with the new adapter?
Zeosstud
-
Title: 1.6 Adapter Is Here!
Post by: VampireHunter on February 15, 2005, 01:08:00 PM
-
Looks sweet, I can't wait to get one for my Crystal Xbox....
-
Title: 1.6 Adapter Is Here!
Post by: Artifex on February 15, 2005, 04:16:00 PM
-
Post by: Misfit111 on February 14, 2005, 11:38:00 PM
Post by: member1521 on February 15, 2005, 04:53:00 AM
Post by: tutyet on February 15, 2005, 06:32:00 AM
Post by: mkulrey13 on February 15, 2005, 09:07:00 AM
Post by: Zeosstud on February 15, 2005, 12:51:00 PM
Zeosstud
Post by: VampireHunter on February 15, 2005, 01:08:00 PM
Post by: Artifex on February 15, 2005, 04:16:00 PM
QUOTE(Zeosstud @ Feb 15 2005, 07:57 PM)
Could anyone confirm is the executor 2.6ce is considered a 4th generation chip and therefor compatible with the new adapter?
-
Title: 1.6 Adapter Is Here!
Post by: Rabid1 on February 16, 2005, 12:18:00 PM
-
Modwhiz is stating they ship on the 21st
-
Title: 1.6 Adapter Is Here!
Post by: ModWhiz on February 17, 2005, 01:20:00 PM
-
Hi,
As posted earlier in this thread we are accepting pre-orders and they should be shipping out next week.
definatly a hot product!
Regards,
ModWhiz
-
Title: 1.6 Adapter Is Here!
Post by: acemilo on February 17, 2005, 08:28:00 PM
-
LMAO what a rip. I orderd an ice last night to do an install and it cost me 50.99 for the regular chip package. For 10 bucks more than you paid for the adapter you could have the whole chip. Now thats a ripoff.
-
Title: 1.6 Adapter Is Here!
Post by: ModWhiz on February 17, 2005, 09:00:00 PM
-
Alot of things are a rip off to different people.
Why eat a $25 steak when you can eat a $1.00 burger at McDonalds, both are beef aren't they?
Buying a X3 & Xapt3r for $55 & $24 is not exactly a bargain either, with less functionality.
It really comes down to what the consumer is interested in or requires.
Also, the pricing is what is suggest by the manufacturer and on a great innovative product like this we must respect that.
BTW, the chip alone is priced at $45.95 which is one the lowest prices around!
Regards,
ModWhiz
-
Title: 1.6 Adapter Is Here!
Post by: gamersha794 on February 18, 2005, 12:51:00 AM
-
you don't even need a modchip in order to mod your box, they are called softmods, or Tsop flashs.
-
Title: 1.6 Adapter Is Here!
Post by: ModWhiz on February 18, 2005, 12:21:00 PM
-
If you want to go the way of installing a mod chip and have a 1.6 XBOX and do not want to mess it up by risking soldering then the XENIUM SP ICE would be the best choice.
Otherwise, if you don't mind soldering any chip will do or as stated a TSOP flash etc..
The only other available solution would be the spider chip, and at the moment there have been a few issues. The spider chip is also inferior in features to the Xenium by far.
Thanks.
ModWhiz
-
Title: 1.6 Adapter Is Here!
Post by: ModWhiz on February 18, 2005, 12:52:00 PM
-
Thanks.
-
Title: 1.6 Adapter Is Here!
Post by: nylaptop on February 19, 2005, 06:51:00 AM
-
Divineo has it in stock for pre orders now ! 02.17.2005 : Xbox Xenium SPICE and SP.ADAPTER for preorder!
-
Title: 1.6 Adapter Is Here!
Post by: nylaptop on February 19, 2005, 07:38:00 AM
-
The solderless piece only comes with the sliver adaptor but does it come with the screw's and the other stuff not including the chip ?
-
Title: 1.6 Adapter Is Here!
Post by: Charbless on February 19, 2005, 10:53:00 AM
-
the UK divineo does not have it thats what im try to say no uk place or europe place has it only usa places and it will cost a lot to get it from usa to uk.
-
Title: 1.6 Adapter Is Here!
Post by: mooks on February 19, 2005, 12:01:00 PM
-
1.6 adapter is here?
-
Title: 1.6 Adapter Is Here!
Post by: thebroken on February 20, 2005, 10:42:00 AM
-
now this SP is said to be x3 compatible and if you look at the pictures it looks like it needs some more pogos to match up with the x3 pinheader i dont know much about x3 but i would think that it would have to match up with the number of pins id rather give more money team xodus rather than xecuter cause the xenium people are a bit more helpful and less flaming
thebroken
thebroken
-
Title: 1.6 Adapter Is Here!
Post by: Charbless on February 20, 2005, 01:26:00 PM
-
you dont pay for help you pay for the product and teamxecuter offer the best products by far and the creater of the the best bios available.
-
Title: 1.6 Adapter Is Here!
Post by: fatpretzle on February 20, 2005, 02:07:00 PM
-
If you use this with an x3 chip will you still have to solder the hd led incators and such?
-
Title: 1.6 Adapter Is Here!
Post by: acemilo on February 20, 2005, 03:14:00 PM
-
Post by: Rabid1 on February 16, 2005, 12:18:00 PM
Post by: ModWhiz on February 17, 2005, 01:20:00 PM
As posted earlier in this thread we are accepting pre-orders and they should be shipping out next week.
definatly a hot product!
Regards,
ModWhiz
Post by: acemilo on February 17, 2005, 08:28:00 PM
Post by: ModWhiz on February 17, 2005, 09:00:00 PM
Why eat a $25 steak when you can eat a $1.00 burger at McDonalds, both are beef aren't they?
Buying a X3 & Xapt3r for $55 & $24 is not exactly a bargain either, with less functionality.
It really comes down to what the consumer is interested in or requires.
Also, the pricing is what is suggest by the manufacturer and on a great innovative product like this we must respect that.
BTW, the chip alone is priced at $45.95 which is one the lowest prices around!
Regards,
ModWhiz
Post by: gamersha794 on February 18, 2005, 12:51:00 AM
Post by: ModWhiz on February 18, 2005, 12:21:00 PM
Otherwise, if you don't mind soldering any chip will do or as stated a TSOP flash etc..
The only other available solution would be the spider chip, and at the moment there have been a few issues. The spider chip is also inferior in features to the Xenium by far.
Thanks.
ModWhiz
Post by: ModWhiz on February 18, 2005, 12:52:00 PM
Thanks.
Post by: nylaptop on February 19, 2005, 06:51:00 AM
Post by: nylaptop on February 19, 2005, 07:38:00 AM
The solderless piece only comes with the sliver adaptor but does it come with the screw's and the other stuff not including the chip ?
Post by: Charbless on February 19, 2005, 10:53:00 AM
Post by: mooks on February 19, 2005, 12:01:00 PM
Post by: thebroken on February 20, 2005, 10:42:00 AM
thebroken
thebroken
Post by: Charbless on February 20, 2005, 01:26:00 PM
Post by: fatpretzle on February 20, 2005, 02:07:00 PM
Post by: acemilo on February 20, 2005, 03:14:00 PM
QUOTE(fatpretzle @ Feb 20 2005, 09:13 PM)
If you use this with an x3 chip will you still have to solder the hd led incators and such?
-
Title: 1.6 Adapter Is Here!
Post by: Elf_Sniper on February 20, 2005, 04:09:00 PM
-
Mooks, you are one of the most ignorant people I have met on Xbox scene. When they made that post, it pretty much was available. They made that post the day they shipped it. They don't know when each supplier will get their Adapters, so they decided just to make a post when they shipped out the adapters.
How would TeamXodus know when every single supplier (there are around 20-30 of them) got their adapters? Maybe not all of them would send an email.
You're a smart cookie, aren't you?
</sarcasm>
-
Title: 1.6 Adapter Is Here!
Post by: thebroken on February 20, 2005, 04:55:00 PM
-
still no answer?
now this SP is said to be x3 compatible and if you look at the pictures it looks like it needs some more pogos to match up with the x3 pinheader i dont know much about x3 but i would think that it would have to match up with the number of pins id rather give more money team xodus rather than xecuter cause the xenium people are a bit more helpful and less flaming
thebroken
-
Title: 1.6 Adapter Is Here!
Post by: mooks on February 20, 2005, 05:07:00 PM
-
Post by: Elf_Sniper on February 20, 2005, 04:09:00 PM
QUOTE
1.6 adapter is here?
Ermm, ....where exactly?
QUOTE(Charbless @ Feb 19 2005, 04:59 PM)
the UK divineo does not have it thats what im try to say no uk place or europe place has it only usa places and it will cost a lot to get it from usa to uk.
exactly, Charbless.
nearly a week since the announcement and not one european based modchip supplier advertising.
Why not just bloody announce the adapter when the bloody thing is available to buy, and not before?
Ermm, ....where exactly?
QUOTE(Charbless @ Feb 19 2005, 04:59 PM)
the UK divineo does not have it thats what im try to say no uk place or europe place has it only usa places and it will cost a lot to get it from usa to uk.
exactly, Charbless.
nearly a week since the announcement and not one european based modchip supplier advertising.
Why not just bloody announce the adapter when the bloody thing is available to buy, and not before?
Mooks, you are one of the most ignorant people I have met on Xbox scene. When they made that post, it pretty much was available. They made that post the day they shipped it. They don't know when each supplier will get their Adapters, so they decided just to make a post when they shipped out the adapters.
How would TeamXodus know when every single supplier (there are around 20-30 of them) got their adapters? Maybe not all of them would send an email.
You're a smart cookie, aren't you?
</sarcasm>
Post by: thebroken on February 20, 2005, 04:55:00 PM
now this SP is said to be x3 compatible and if you look at the pictures it looks like it needs some more pogos to match up with the x3 pinheader i dont know much about x3 but i would think that it would have to match up with the number of pins id rather give more money team xodus rather than xecuter cause the xenium people are a bit more helpful and less flaming
thebroken
Post by: mooks on February 20, 2005, 05:07:00 PM
QUOTE(Elf_Sniper @ Feb 20 2005, 10:15 PM)
Mooks, you are one of the most ignorant people I have met on Xbox scene. When they made that post, it pretty much was available. They made that post the day they shipped it.
-
Title: 1.6 Adapter Is Here!
Post by: mrjkwik on February 20, 2005, 07:12:00 PM
-
edit:
-
Title: 1.6 Adapter Is Here!
Post by: ModWhiz on February 20, 2005, 08:17:00 PM
-
I know you were referring to EU suppliers, but in our case we have been accepting pre-orders since Monday/Tuesday and we will be shipping out this week.
I can guarantee you this is not "Vaporware" and the biggest EU supplier has it on pre-order for several days also...
Regards,
ModWhiz
-
Title: 1.6 Adapter Is Here!
Post by: Artifex on February 20, 2005, 09:50:00 PM
-
Just to clarify a few points:
1. What resellers do/do-not accept pre-orders for any product is outside of the control of Team Xodus. If they choose to put up pre-orders, that's their call. If they choose not to, again, it's nothing to do with us. We cannot make decisions on behalf of the reseller.
2. The adapter is ready, here, now, and will be in the hands of the customers (you) as soon as possible. Keep in mind that they basically need to go from factory to warehousing to distribution to the resellers, to be repackaged as their pre-orders are processed, and then re-shipped out to you..... This is not an overnight process and, again, is not in Team Xodus' hands. We are doing our best to hurry things along, but you have to understand that after production begins, and we make the product announcement, everything is left up to the supply chain..... and it's not a short chain.
3. The adapter WILL be compatible with x3. The adapter pictured is what is shipped with the S.P.ICE package, and does not have the full set of pogos, as it is obviously intended for use with the ICE that it's shipped with. Individual adapters will have the full set of pogos (notice the holes for them on the adapter!) for X3 compatability.
Have I missed any other issues which need to be addressed?
--Artifex
-
Title: 1.6 Adapter Is Here!
Post by: Gumba on February 21, 2005, 08:38:00 AM
-
Post by: mrjkwik on February 20, 2005, 07:12:00 PM
Post by: ModWhiz on February 20, 2005, 08:17:00 PM
QUOTE(mooks @ Feb 21 2005, 12:13 AM)
If teamxodus shipped the adapters on the day they annouced it then
1) the suppliers must already know the price they are paying for them,
2) the suppliers know when they will reasonably expect to receive the adapters, and,
3) the suppliers would allow pre-orders (stating delivery in a week or so).
1) the suppliers must already know the price they are paying for them,
2) the suppliers know when they will reasonably expect to receive the adapters, and,
3) the suppliers would allow pre-orders (stating delivery in a week or so).
I know you were referring to EU suppliers, but in our case we have been accepting pre-orders since Monday/Tuesday and we will be shipping out this week.
I can guarantee you this is not "Vaporware" and the biggest EU supplier has it on pre-order for several days also...
Regards,
ModWhiz
Post by: Artifex on February 20, 2005, 09:50:00 PM
1. What resellers do/do-not accept pre-orders for any product is outside of the control of Team Xodus. If they choose to put up pre-orders, that's their call. If they choose not to, again, it's nothing to do with us. We cannot make decisions on behalf of the reseller.
2. The adapter is ready, here, now, and will be in the hands of the customers (you) as soon as possible. Keep in mind that they basically need to go from factory to warehousing to distribution to the resellers, to be repackaged as their pre-orders are processed, and then re-shipped out to you..... This is not an overnight process and, again, is not in Team Xodus' hands. We are doing our best to hurry things along, but you have to understand that after production begins, and we make the product announcement, everything is left up to the supply chain..... and it's not a short chain.
3. The adapter WILL be compatible with x3. The adapter pictured is what is shipped with the S.P.ICE package, and does not have the full set of pogos, as it is obviously intended for use with the ICE that it's shipped with. Individual adapters will have the full set of pogos (notice the holes for them on the adapter!) for X3 compatability.
Have I missed any other issues which need to be addressed?
--Artifex
Post by: Gumba on February 21, 2005, 08:38:00 AM
QUOTE(Artifex @ Feb 21 2005, 02:56 PM)
Have I missed any other issues which need to be addressed?
-
Title: 1.6 Adapter Is Here!
Post by: pinda003 on February 21, 2005, 09:46:00 AM
-
http://teamxodus.com...LDERLESS_16.wmv
Check out how easy this is.. Looks a bit unstable tho....
-
Title: 1.6 Adapter Is Here!
Post by: mrjkwik on February 23, 2005, 08:24:00 PM
-
i think thats been addressed before, and was supposed to do that. cant remember exactly why though.
-
Title: 1.6 Adapter Is Here!
Post by: mrjkwik on February 23, 2005, 08:32:00 PM
-
found it.
-
Title: 1.6 Adapter Is Here!
Post by: TheSaint on February 24, 2005, 12:26:00 AM
-
Will X2.6CE work on here. Also, I have an old chameleon I'd like to use. Would that work on there also?
-
Title: 1.6 Adapter Is Here!
Post by: FallsInc on February 24, 2005, 01:55:00 AM
-
all LPC based chips with a female pinheader will work on the SP.
just solder the d0 connection to pin 4 on the header block to make it work (extremely easy).
-
Title: 1.6 Adapter Is Here!
Post by: gamersha794 on February 24, 2005, 02:06:00 AM
-
doesn't that defeat the purpose of solderless?
-
Title: 1.6 Adapter Is Here!
Post by: nylaptop on February 24, 2005, 01:20:00 PM
-
it should be available next week in Divineo.
-
Title: 1.6 Adapter Is Here!
Post by: RCC123 on February 24, 2005, 03:28:00 PM
-
Here's a tut I wrote for the Xodus S.P. two weeks ago. Of course I don't have one yet... I just did some research and wrote down some logical steps. Anyways here it is....
http://rcc123.no-ip.info/xodussp/
-
Title: 1.6 Adapter Is Here!
Post by: RCC123 on February 24, 2005, 03:37:00 PM
-
You shouldn't have to solder anything... the male pinhead rebuild has the D0 already connected to it. The white PCB sits on top of a solderless adaptor which has a D0 spring wire. That D0 connection is then sent through the white PCB and into the rebuilt male pinhead. From there you can slide on any gen 4 mod for use. There's even a female rebuild on the White PCB for chips with male adaptors (i.e. X-Bit, etc.) So it really is solderless. The only thing you would ever have to solder is like Lan and HDD light wires on the X3.
-
Title: 1.6 Adapter Is Here!
Post by: rj15 on February 24, 2005, 08:25:00 PM
-
-
Title: 1.6 Adapter Is Here!
Post by: acemilo on February 26, 2005, 02:20:00 PM
-
It comes with what you see on the resellers page. As far as I can tell, no it does not come with the led.
-
Title: 1.6 Adapter Is Here!
Post by: RAAAMESH on February 26, 2005, 02:45:00 PM
-
Post by: pinda003 on February 21, 2005, 09:46:00 AM
Check out how easy this is.. Looks a bit unstable tho....
Post by: mrjkwik on February 23, 2005, 08:24:00 PM
Post by: mrjkwik on February 23, 2005, 08:32:00 PM
QUOTE(cap269 @ Jan 18 2005, 10:29 PM)
That's the D0 light. It went off because the chip booted.
found it.
Post by: TheSaint on February 24, 2005, 12:26:00 AM
Post by: FallsInc on February 24, 2005, 01:55:00 AM
just solder the d0 connection to pin 4 on the header block to make it work (extremely easy).
Post by: gamersha794 on February 24, 2005, 02:06:00 AM
Post by: nylaptop on February 24, 2005, 01:20:00 PM
Post by: RCC123 on February 24, 2005, 03:28:00 PM
http://rcc123.no-ip.info/xodussp/
Post by: RCC123 on February 24, 2005, 03:37:00 PM
Post by: rj15 on February 24, 2005, 08:25:00 PM
Post by: acemilo on February 26, 2005, 02:20:00 PM
Post by: RAAAMESH on February 26, 2005, 02:45:00 PM
QUOTE(pinda003 @ Feb 24 2005, 02:52 PM)
Finally got it pre-ordered on divineo.co.uk!! For europe resellers.. it was added 2 days ago! can't wait for shipment because an unmodded xbox = USELESS!!! here here!
-
Title: 1.6 Adapter Is Here!
Post by: Gumba on February 27, 2005, 07:47:00 AM
-
Post by: Gumba on February 27, 2005, 07:47:00 AM
QUOTE(acemilo @ Feb 27 2005, 07:26 AM)
It comes with what you see on the resellers page. As far as I can tell, no it does not come with the led.
-
Title: 1.6 Adapter Is Here!
Post by: cblaz86 on February 27, 2005, 12:38:00 PM
-
Post by: cblaz86 on February 27, 2005, 12:38:00 PM
QUOTE(buehrer @ Feb 27 2005, 07:17 PM)
hi,
-
Title: 1.6 Adapter Is Here!
Post by: nylaptop on February 27, 2005, 01:40:00 PM
-
Post by: nylaptop on February 27, 2005, 01:40:00 PM
QUOTE(cblaz86 @ Feb 27 2005, 02:44 PM)
I haven't even gotten mine yet, and I preordered it from modwhiz.com early last week. I thought they were supposed to be shipping them this week, but nothing yet. And if they did ship them... well, so much for overnight delivery.
-
Title: 1.6 Adapter Is Here!
Post by: -copyguy- on February 27, 2005, 03:38:00 PM
-
Post by: -copyguy- on February 27, 2005, 03:38:00 PM
QUOTE(cblaz86 @ Feb 27 2005, 02:44 PM)
I haven't even gotten mine yet, and I preordered it from modwhiz.com early last week. I thought they were supposed to be shipping them this week, but nothing yet. And if they did ship them... well, so much for overnight delivery.
-
Title: 1.6 Adapter Is Here!
Post by: cblaz86 on February 27, 2005, 11:14:00 PM
-
Yeah, I e-mailed them too.... I smell conspiracy!
I don't really mind waiting, I just wish that they would at least let us know what's going on.
-
Title: 1.6 Adapter Is Here!
Post by: Rabid1 on February 28, 2005, 12:25:00 AM
-
I have layed out and ordered custom electronics before and there definitely can be a number of hold ups from order to ship.
-
Title: 1.6 Adapter Is Here!
Post by: thebroken on February 28, 2005, 07:36:00 AM
-
all they have to type is " SP will ship 28th of May" 5 words easy
thebroken
-
Title: 1.6 Adapter Is Here!
Post by: -copyguy- on February 28, 2005, 01:45:00 PM
-
-
Title: 1.6 Adapter Is Here!
Post by: nylaptop on February 28, 2005, 02:33:00 PM
-
Post by: cblaz86 on February 27, 2005, 11:14:00 PM
I don't really mind waiting, I just wish that they would at least let us know what's going on.
Post by: Rabid1 on February 28, 2005, 12:25:00 AM
QUOTE
2. The adapter is ready, here, now, and will be in the hands of the customers (you) as soon as possible. Keep in mind that they basically need to go from factory to warehousing to distribution to the resellers, to be repackaged as their pre-orders are processed, and then re-shipped out to you..... This is not an overnight process and, again, is not in Team Xodus' hands. We are doing our best to hurry things along, but you have to understand that after production begins, and we make the product announcement, everything is left up to the supply chain..... and it's not a short chain.
I have layed out and ordered custom electronics before and there definitely can be a number of hold ups from order to ship.
Post by: thebroken on February 28, 2005, 07:36:00 AM
thebroken
Post by: -copyguy- on February 28, 2005, 01:45:00 PM
Post by: nylaptop on February 28, 2005, 02:33:00 PM
QUOTE(-copyguy- @ Feb 28 2005, 03:51 PM)
w00t! Straight from modwhiz.com:
-
Title: 1.6 Adapter Is Here!
Post by: Dangerously_Cheesy on February 28, 2005, 03:03:00 PM
-
-
Title: 1.6 Adapter Is Here!
Post by: pmh on February 28, 2005, 06:07:00 PM
-
is there another place to order from? For some reason, the site won't let me order... I tried calling him too, but the it was still rejected... WTF?
-
Title: 1.6 Adapter Is Here!
Post by: nylaptop on February 28, 2005, 06:56:00 PM
-
...
-
Title: 1.6 Adapter Is Here!
Post by: buehrer on March 01, 2005, 08:01:00 AM
-
this is from modchipman.com...
Xenium S.P.ICE is currently on PREORDER. According to Team Xodus, it should arrive FIRST week of March.
greg
-
Title: 1.6 Adapter Is Here!
Post by: PackingHeat on March 01, 2005, 03:52:00 PM
-
I got a reply about my preorder yesterday from Divineo.ch that they were told by Xodus not to expect release of the SPICE for 3-4 more weeks. By promoting a product as if it were available and then failing to deliver in a reasonable time of getting me all "hot and bothered" about it, Xodus has lost a sale. Screw this! I am canceling my preorder going with the Spiderchip. My brother has the install technique perfected and all the installs he has done work great.
-
Title: 1.6 Adapter Is Here!
Post by: Rabid1 on March 01, 2005, 10:20:00 PM
-
I got a reply about my preorder yesterday from Divineo.ch that they were told by Xodus not to expect release of the SPICE for 3-4 more weeks. By promoting a product as if it were available and then failing to deliver in a reasonable time of getting me all "hot and bothered" about it, Xodus has lost a sale. Screw this! I am canceling my preorder going with the Spiderchip. My brother has the install technique perfected and all the installs he has done work great.
-
Title: 1.6 Adapter Is Here!
Post by: Elf_Sniper on March 02, 2005, 04:10:00 PM
-
1. If you're too lazy to solder it, shame on you.
2. I feel sorry for ANYONE who buys a spiderchip LOL.
-
Title: 1.6 Adapter Is Here!
Post by: acemilo on March 02, 2005, 04:21:00 PM
-
I second that
-
Title: 1.6 Adapter Is Here!
Post by: cblaz86 on March 02, 2005, 09:33:00 PM
-
Post by: Dangerously_Cheesy on February 28, 2005, 03:03:00 PM
Post by: pmh on February 28, 2005, 06:07:00 PM
Post by: nylaptop on February 28, 2005, 06:56:00 PM
...
Post by: buehrer on March 01, 2005, 08:01:00 AM
Xenium S.P.ICE is currently on PREORDER. According to Team Xodus, it should arrive FIRST week of March.
greg
Post by: PackingHeat on March 01, 2005, 03:52:00 PM
I got a reply about my preorder yesterday from Divineo.ch that they were told by Xodus not to expect release of the SPICE for 3-4 more weeks. By promoting a product as if it were available and then failing to deliver in a reasonable time of getting me all "hot and bothered" about it, Xodus has lost a sale. Screw this! I am canceling my preorder going with the Spiderchip. My brother has the install technique perfected and all the installs he has done work great.
Post by: Rabid1 on March 01, 2005, 10:20:00 PM
QUOTE(PackingHeat @ Mar 1 2005, 10:58 PM)
I got a reply about my preorder yesterday from Divineo.ch that they were told by Xodus not to expect release of the SPICE for 3-4 more weeks. By promoting a product as if it were available and then failing to deliver in a reasonable time of getting me all "hot and bothered" about it, Xodus has lost a sale. Screw this! I am canceling my preorder going with the Spiderchip. My brother has the install technique perfected and all the installs he has done work great.Post by: Elf_Sniper on March 02, 2005, 04:10:00 PM
QUOTE
I am canceling my preorder going with the Spiderchip.
1. If you're too lazy to solder it, shame on you.
2. I feel sorry for ANYONE who buys a spiderchip LOL.
Post by: acemilo on March 02, 2005, 04:21:00 PM
QUOTE
2. I feel sorry for ANYONE who buys a spiderchip LOL.
I second that
Post by: cblaz86 on March 02, 2005, 09:33:00 PM
QUOTE(Elf_Sniper @ Mar 2 2005, 11:16 PM)
1. If you're too lazy to solder it, shame on you.
-
Title: 1.6 Adapter Is Here!
Post by: -copyguy- on March 03, 2005, 11:24:00 AM
-
Modwhiz.com has updated their website again...
Xenium S.P. ICE now on sale! All pre-orders now being processed for shipping. All shipping delays now settled.
so hopefully I'll be getting my SP soon...
I tried soldering and even with practice managed to botch the job...some of us just can't solder...that's who the solderless adapters are for...
-copyguy-
-
Title: 1.6 Adapter Is Here!
Post by: cblaz86 on March 03, 2005, 02:00:00 PM
-
Just saw that, though I still haven't gotten a tracking number.
-
Title: 1.6 Adapter Is Here!
Post by: nylaptop on March 03, 2005, 03:12:00 PM
-
Post by: -copyguy- on March 03, 2005, 11:24:00 AM
Modwhiz.com has updated their website again...Xenium S.P. ICE now on sale! All pre-orders now being processed for shipping. All shipping delays now settled.
so hopefully I'll be getting my SP soon...
I tried soldering and even with practice managed to botch the job...some of us just can't solder...that's who the solderless adapters are for...
-copyguy-
Post by: cblaz86 on March 03, 2005, 02:00:00 PM
Post by: nylaptop on March 03, 2005, 03:12:00 PM
QUOTE(cblaz86 @ Mar 3 2005, 04:06 PM)
Just saw that, though I still haven't gotten a tracking number.
-
Title: 1.6 Adapter Is Here!
Post by: BeeMo on March 03, 2005, 03:21:00 PM
-
The way things have been going, I wouldn't doubt that this is just another ploy to get us off their back. Hopefully, I'm wrong and they truly are shipping.
-
Title: 1.6 Adapter Is Here!
Post by: -copyguy- on March 03, 2005, 03:32:00 PM
-
-
Title: 1.6 Adapter Is Here!
Post by: Elf_Sniper on March 03, 2005, 05:03:00 PM
-
Post by: BeeMo on March 03, 2005, 03:21:00 PM
Post by: -copyguy- on March 03, 2005, 03:32:00 PM
Post by: Elf_Sniper on March 03, 2005, 05:03:00 PM
QUOTE(cblaz86 @ Mar 2 2005, 10:39 PM)
Maybe he's not lazy... maybe he:
-
Title: 1.6 Adapter Is Here!
Post by: acemilo on March 03, 2005, 07:05:00 PM
-
I think everyone needs to stop bitching about this thing. Its very simple. You can either wait until the resellers decide to send the adapters out (or whenever xodus sends them to the resellers), or you can use the money to pay someone else to solder the thing in for you (no need to wait), or you can solder it in yourself. Those are your options, bitching doesn't help anything. If you guys arent patient, then just solder it yourself or pay someone to do it for you (it isn't hard). End of story.
-
Title: 1.6 Adapter Is Here!
Post by: EmperorPsiblade on March 03, 2005, 07:06:00 PM
-
Yeah... and 80% of people didn't have any prior experience either...
I sure as hell didn't...
-
Title: 1.6 Adapter Is Here!
Post by: nylaptop on March 03, 2005, 08:14:00 PM
-
modwhiz hasnt given me my tracking number DAMMIT ! !
-
Title: 1.6 Adapter Is Here!
Post by: BeeMo on March 03, 2005, 08:46:00 PM
-
Post by: acemilo on March 03, 2005, 07:05:00 PM
Post by: EmperorPsiblade on March 03, 2005, 07:06:00 PM
QUOTE(Elf_Sniper)
1. I didn't have any prior soldering experience
Yeah... and 80% of people didn't have any prior experience either...
I sure as hell didn't...
Post by: nylaptop on March 03, 2005, 08:14:00 PM
Post by: BeeMo on March 03, 2005, 08:46:00 PM
QUOTE(acemilo @ Mar 4 2005, 02:11 AM)
I think everyone needs to stop bitching about this thing. Its very simple. You can either wait until the resellers decide to send the adapters out (or whenever xodus sends them to the resellers), or you can use the money to pay someone else to solder the thing in for you (no need to wait), or you can solder it in yourself. Those are your options, bitching doesn't help anything. If you guys arent patient, then just solder it yourself or pay someone to do it for you (it isn't hard). End of story.
-
Title: 1.6 Adapter Is Here!
Post by: cblaz86 on March 03, 2005, 10:56:00 PM
-
Post by: cblaz86 on March 03, 2005, 10:56:00 PM
QUOTE(Elf_Sniper @ Mar 4 2005, 12:09 AM)
1. I didn't have any prior soldering experience
-
Title: 1.6 Adapter Is Here!
Post by: acemilo on March 03, 2005, 11:03:00 PM
-
Most resellers dont read these boards, so if you want answers you will have to email them directly or go to their irc channels. Bitching about it here won't solve anything (and btw its most likely xodus' fault that there are delays).
-
Title: 1.6 Adapter Is Here!
Post by: -copyguy- on March 04, 2005, 06:35:00 AM
-
Post by: acemilo on March 03, 2005, 11:03:00 PM
Post by: -copyguy- on March 04, 2005, 06:35:00 AM
QUOTE(acemilo @ Mar 4 2005, 01:09 AM)
Most resellers dont read these boards, so if you want answers you will have to email them directly or go to their irc channels. Bitching about it here won't solve anything (and btw its most likely xodus' fault that there are delays).
-
Title: 1.6 Adapter Is Here!
Post by: cblaz86 on March 04, 2005, 02:11:00 PM
-
Post by: cblaz86 on March 04, 2005, 02:11:00 PM
QUOTE(acemilo @ Mar 4 2005, 06:09 AM)
...so if you want answers you will have to email them directly...
-
Title: 1.6 Adapter Is Here!
Post by: cblaz86 on March 04, 2005, 03:28:00 PM
-
From modwhiz.com:
"Xenium S.P. ICE now on sale! All pre-orders now being processed for shipping. Tracking numbers sent directly via FedEX software. All shipping delays now settled. Stock has arrived and is being sent out daily! We apologize for any past delays and appreciate your patience in this matter. Modwhiz.com Staff"
Yay! Where should I check for my tracking number? E-Mail?
-
Title: 1.6 Adapter Is Here!
Post by: Tfizzle on March 04, 2005, 06:47:00 PM
-
-
Title: 1.6 Adapter Is Here!
Post by: ModWhiz on March 04, 2005, 06:47:00 PM
-
Thanks for the great response to the pre-order and your patience in this matter.
Regards,
ModWhiz.com
-
Title: 1.6 Adapter Is Here!
Post by: NeroNetFi on March 04, 2005, 10:51:00 PM
-
Ok now I am highley upset. I placed my order with Divineo.com 2 weeks ago
I figured they were just laying low and not advertising that when they were shipping them. Well now I wish I would have canceled that order and purchased from Modwhiz.com. Anyone out there have any clue if and when Divineo.com is shipping orders?
-
Title: 1.6 Adapter Is Here!
Post by: Dindas on March 05, 2005, 07:45:00 AM
-
Post by: cblaz86 on March 04, 2005, 03:28:00 PM
"Xenium S.P. ICE now on sale! All pre-orders now being processed for shipping. Tracking numbers sent directly via FedEX software. All shipping delays now settled. Stock has arrived and is being sent out daily! We apologize for any past delays and appreciate your patience in this matter. Modwhiz.com Staff"
Yay! Where should I check for my tracking number? E-Mail?
Post by: Tfizzle on March 04, 2005, 06:47:00 PM
Post by: ModWhiz on March 04, 2005, 06:47:00 PM
Thanks for the great response to the pre-order and your patience in this matter.
Regards,
ModWhiz.com
Post by: NeroNetFi on March 04, 2005, 10:51:00 PM
I figured they were just laying low and not advertising that when they were shipping them. Well now I wish I would have canceled that order and purchased from Modwhiz.com. Anyone out there have any clue if and when Divineo.com is shipping orders?
Post by: Dindas on March 05, 2005, 07:45:00 AM
QUOTE(NeroNetFi @ Mar 5 2005, 12:57 AM)
Ok now I am highley upset. I placed my order with Divineo.com 2 weeks ago
-
Title: 1.6 Adapter Is Here!
Post by: NeroNetFi on March 05, 2005, 10:45:00 AM
-
I should call off sick from work when it gets here. I think I deserve that after waiting so long to get it
-
Title: 1.6 Adapter Is Here!
Post by: nylaptop on March 05, 2005, 11:31:00 AM
-
I ordered my spice adaptor from modwhiz got my tracking number on fri... I ordered the spice package for my friend in diveno and i got the tracking number today...
-
Title: 1.6 Adapter Is Here!
Post by: DJSymmetry on March 05, 2005, 01:00:00 PM
-
-
Title: 1.6 Adapter Is Here!
Post by: christineyoung on March 06, 2005, 10:53:00 AM
-
This will not work with any 5V powered modchips ( aka X3, XChip, X-Lite, etc ) 100%.
This design using teh Standby 5V on LPC pin #6 which means when you make chnage sin BIOS or wnat to disable chip you must unplug power cord and reinsert to make changes.
Truely FALSE advertising by Xodus, as saying truly solderless and compatible with all 4th gen modchips.
As for the X3 and HDD/LAN leds, you can just run those wires directly to modchip and not use the header soldereding in 3 pins, but you will still be lacking 5V needed for it so, you will be curring a trace on white PCB and soldering a true 5V and not 5VSB to the modchips. Or not use them!
As for modwhiz' lets see call you Tuesday your not at office, you state pickups on Thursday no one in office or answering emails or phone calls, and office hours on machine, Friday call and message from thursday stating no one working all shipped, now on Friday say working overtime to ship. Seems miss organized big time, as no one at office on Griffith Wednesday/Thursday/Friday at any hours( yes i work a mear 4-5 blcoks away and visitied/tried to visit several times ). Please PM me, ASAP very disappointed in delays. Now Friday afternoon changes to Monday message no one in office till then.
-
Title: 1.6 Adapter Is Here!
Post by: ModWhiz on March 06, 2005, 01:52:00 PM
-
Hi Christine Young,
I will let Xodus answer your post for themselves.
As for us, if you are the person I spoke to on the phone that wanted to pass by our office to pick it up but did not want to wait for the bus, then I do not see what your problem is.
We do not do local pickups from our office location per say, we do make some exceptions sometimes. As for us being in the office, we are there 9-5 weekdays and much later usually. We have a couple locations in that building for starters not to mention I do not even recall giving you our suite number so how could you make such statements. We have a sales and shipping office in that building for security reasons, so you may have caught us while we were shipping packages.
As for the phone, we intentionally closed the phone line from wedsnday-friday with an informative message explaining the situation to everyone to alleviate the high volume of calls we were receiving to focus on getting everything done.
Oh... it's Sunday and we are at the office, guess you are right... we're never here.
Thank you for your concerns and telling us how we (mis)-run our business without any knowledge of the day to day operations.
Regards,
ModWhiz.com
-
Title: 1.6 Adapter Is Here!
Post by: Artifex on March 06, 2005, 05:57:00 PM
-
I find it interesting that you attempt to make a post sound knowledgeable, talking about the standby well, voltage requirements, and so forth.... yet I count, at a glance, at least a dozen grammatical and/or spelling mistakes, which is an impressive count for a mere 4-5 sentances! May I make a friendly suggestion that the next time you try to make a post "sound smart" you should perhaps start with a basic grasp of the language in which you're communicating. If english is not your first language, perhaps you should have someone more versed in the grammar review your statement before publicly humiliating yourself as such.
I find it even more interesting that this seemingly "informed" post contains such a drastic count of fallacies, misinformation, and ill-founded assumptions. I see that our competition has not been remiss in it's obligation of trying to downplay our superior design skills at every opportunity. They take advantage of every slight chance, no matter how absurd, to get an anti-Xodus word in edgewise.
If you had actually examined the design a bit further you would have, perhaps, noticed another reason that the X3 "won't work," that being the lack of the smbus pins. However, you would have likely noticed that there are a set of holes in place of where those smbus pins should be. A closer inspection might reveal that the pins of the adapter would fit nicely into these holes, or nicely out of them, in whatever configuration were required. The adapter pictured in the SPICE package is configured for a Xenium modchip, as it SHIPS WITH a Xenium modchip, and the assumption is that it is going to be used with that chip. Other configurations for other chips will, of course, be available.... For example, an X3 configuration with the smbus pins in the smbus pin spots, and the dreaded v1.6 5v standby-well power removed.
Yes, you heard me correctly, we've even taken the time to bother to design around the poor design skills of our competitors, solving their problems for them. They, instead, seem to choose to spend their time starting rumors, spreading misinformation, and trying to make themselves look good in spite of their own doings.
The fact that there is a 1.6 solderless solution should be cause for celebration, not trite attacks from competitors with no competing product.
At any rate, this is far more of a response then your original post warranted in the first place, so I'll be moving along now.
Thank you for your patronage,
--Artifex
-
Title: 1.6 Adapter Is Here!
Post by: acemilo on March 06, 2005, 08:00:00 PM
-
Hey artifex, you still never mentioned the alt 5v source. I understand that your are bothered when someone knocks your product, but he is right, the adapter will not work with an x3 on a 1.6. The x3 needs the alt 5v source and there is no method of getting that power from your adapter. Sorry, but its the truth.
-
Title: 1.6 Adapter Is Here!
Post by: christineyoung on March 06, 2005, 08:02:00 PM
-
Artifex: If you would had read my response more closely, i noted the 3 pins which i suggested to thers to wire directly rather then pin headers. I nearly pointed out a issue of the 5V only used by a few chips anyways but when you/Xodus stated works with Xecuters designs, you may have added that a true 5V source is suggested. Its always best to hear feedback, rather then to reflect and think you are #1 all the time, improvements always enhance a product but then again how many revisions of Chameleon( i have at least 3 ) and Xeniums( I have at least 2 ) did you have? All improvements after initial design. As for grammer, so be it if i don't speak native english 100%. BTW I have yet to read any rumours about this product from competition, or are you( xodus ) scared of the secrecy of the LED's ( Voltage high for connection diagnostics ). Simple concept!
Do you honestly expect by saying compatible with other modchips you are not putting yourselves up to support what you called "poor design" as you state compatible. I just pointed out obvious.
Your product does work on your products, but maybe clarification as you mention #1 selling competition compatible ( X3 ) which will make your sales skyrocket, you must be prepared for support as well and have explaination handy on why a 1 wire solution for voltage maybe required.
You could had also noted about the smbus pins that if used pogo pins, soldering to underside may cause issues so your forethough and devised simple pin header install method for these 3 pins.
Agin sorry for my english, but if you can't take critisism, to make improvements what use is listening and addreessing using issues.
BTW I must admit the rerouting of the D0 for old systems( black plastic pogo pin adapter ) to use as a LAD line creative and simple concept on PCB. Simplicity is sometimes the best way.
-
Title: 1.6 Adapter Is Here!
Post by: DJSymmetry on March 06, 2005, 11:35:00 PM
-
Hey christine i think it's time to update your X-S bad dealings signature.
-
Title: 1.6 Adapter Is Here!
Post by: thebroken on March 07, 2005, 12:17:00 AM
-
hmm
i buy all my stuff from m o d s o u r c e good ppl there
-
Title: 1.6 Adapter Is Here!
Post by: -copyguy- on March 07, 2005, 09:26:00 AM
-
Post by: NeroNetFi on March 05, 2005, 10:45:00 AM
I should call off sick from work when it gets here. I think I deserve that after waiting so long to get it
Post by: nylaptop on March 05, 2005, 11:31:00 AM
Post by: DJSymmetry on March 05, 2005, 01:00:00 PM
Post by: christineyoung on March 06, 2005, 10:53:00 AM
This design using teh Standby 5V on LPC pin #6 which means when you make chnage sin BIOS or wnat to disable chip you must unplug power cord and reinsert to make changes.
Truely FALSE advertising by Xodus, as saying truly solderless and compatible with all 4th gen modchips.
As for the X3 and HDD/LAN leds, you can just run those wires directly to modchip and not use the header soldereding in 3 pins, but you will still be lacking 5V needed for it so, you will be curring a trace on white PCB and soldering a true 5V and not 5VSB to the modchips. Or not use them!
As for modwhiz' lets see call you Tuesday your not at office, you state pickups on Thursday no one in office or answering emails or phone calls, and office hours on machine, Friday call and message from thursday stating no one working all shipped, now on Friday say working overtime to ship. Seems miss organized big time, as no one at office on Griffith Wednesday/Thursday/Friday at any hours( yes i work a mear 4-5 blcoks away and visitied/tried to visit several times ). Please PM me, ASAP very disappointed in delays. Now Friday afternoon changes to Monday message no one in office till then.
Post by: ModWhiz on March 06, 2005, 01:52:00 PM
I will let Xodus answer your post for themselves.
As for us, if you are the person I spoke to on the phone that wanted to pass by our office to pick it up but did not want to wait for the bus, then I do not see what your problem is.
We do not do local pickups from our office location per say, we do make some exceptions sometimes. As for us being in the office, we are there 9-5 weekdays and much later usually. We have a couple locations in that building for starters not to mention I do not even recall giving you our suite number so how could you make such statements. We have a sales and shipping office in that building for security reasons, so you may have caught us while we were shipping packages.
As for the phone, we intentionally closed the phone line from wedsnday-friday with an informative message explaining the situation to everyone to alleviate the high volume of calls we were receiving to focus on getting everything done.
Oh... it's Sunday and we are at the office, guess you are right... we're never here.
Thank you for your concerns and telling us how we (mis)-run our business without any knowledge of the day to day operations.
Regards,
ModWhiz.com
Post by: Artifex on March 06, 2005, 05:57:00 PM
QUOTE(christineyoung @ Mar 6 2005, 05:59 PM)
This will not work with any 5V powered modchips ( aka X3, XChip, X-Lite, etc ) 100%.
This design using teh Standby 5V on LPC pin #6 which means when you make chnage sin BIOS or wnat to disable chip you must unplug power cord and reinsert to make changes.
Truely FALSE advertising by Xodus, as saying truly solderless and compatible with all 4th gen modchips.
As for the X3 and HDD/LAN leds, you can just run those wires directly to modchip and not use the header soldereding in 3 pins, but you will still be lacking 5V needed for it so, you will be curring a trace on white PCB and soldering a true 5V and not 5VSB to the modchips. Or not use them!
This design using teh Standby 5V on LPC pin #6 which means when you make chnage sin BIOS or wnat to disable chip you must unplug power cord and reinsert to make changes.
Truely FALSE advertising by Xodus, as saying truly solderless and compatible with all 4th gen modchips.
As for the X3 and HDD/LAN leds, you can just run those wires directly to modchip and not use the header soldereding in 3 pins, but you will still be lacking 5V needed for it so, you will be curring a trace on white PCB and soldering a true 5V and not 5VSB to the modchips. Or not use them!
I find it interesting that you attempt to make a post sound knowledgeable, talking about the standby well, voltage requirements, and so forth.... yet I count, at a glance, at least a dozen grammatical and/or spelling mistakes, which is an impressive count for a mere 4-5 sentances! May I make a friendly suggestion that the next time you try to make a post "sound smart" you should perhaps start with a basic grasp of the language in which you're communicating. If english is not your first language, perhaps you should have someone more versed in the grammar review your statement before publicly humiliating yourself as such.
I find it even more interesting that this seemingly "informed" post contains such a drastic count of fallacies, misinformation, and ill-founded assumptions. I see that our competition has not been remiss in it's obligation of trying to downplay our superior design skills at every opportunity. They take advantage of every slight chance, no matter how absurd, to get an anti-Xodus word in edgewise.
If you had actually examined the design a bit further you would have, perhaps, noticed another reason that the X3 "won't work," that being the lack of the smbus pins. However, you would have likely noticed that there are a set of holes in place of where those smbus pins should be. A closer inspection might reveal that the pins of the adapter would fit nicely into these holes, or nicely out of them, in whatever configuration were required. The adapter pictured in the SPICE package is configured for a Xenium modchip, as it SHIPS WITH a Xenium modchip, and the assumption is that it is going to be used with that chip. Other configurations for other chips will, of course, be available.... For example, an X3 configuration with the smbus pins in the smbus pin spots, and the dreaded v1.6 5v standby-well power removed.
Yes, you heard me correctly, we've even taken the time to bother to design around the poor design skills of our competitors, solving their problems for them. They, instead, seem to choose to spend their time starting rumors, spreading misinformation, and trying to make themselves look good in spite of their own doings.
The fact that there is a 1.6 solderless solution should be cause for celebration, not trite attacks from competitors with no competing product.
At any rate, this is far more of a response then your original post warranted in the first place, so I'll be moving along now.
Thank you for your patronage,
--Artifex
Post by: acemilo on March 06, 2005, 08:00:00 PM
Post by: christineyoung on March 06, 2005, 08:02:00 PM
Do you honestly expect by saying compatible with other modchips you are not putting yourselves up to support what you called "poor design" as you state compatible. I just pointed out obvious.
Your product does work on your products, but maybe clarification as you mention #1 selling competition compatible ( X3 ) which will make your sales skyrocket, you must be prepared for support as well and have explaination handy on why a 1 wire solution for voltage maybe required.
You could had also noted about the smbus pins that if used pogo pins, soldering to underside may cause issues so your forethough and devised simple pin header install method for these 3 pins.
Agin sorry for my english, but if you can't take critisism, to make improvements what use is listening and addreessing using issues.
BTW I must admit the rerouting of the D0 for old systems( black plastic pogo pin adapter ) to use as a LAD line creative and simple concept on PCB. Simplicity is sometimes the best way.
Post by: DJSymmetry on March 06, 2005, 11:35:00 PM
Post by: thebroken on March 07, 2005, 12:17:00 AM
i buy all my stuff from m o d s o u r c e good ppl there
Post by: -copyguy- on March 07, 2005, 09:26:00 AM
QUOTE(christineyoung @ Mar 6 2005, 12:59 PM)
This will not work with any 5V powered modchips ( aka X3, XChip, X-Lite, etc ) 100%.
-
Title: 1.6 Adapter Is Here!
Post by: thebroken on March 07, 2005, 10:17:00 AM
-
yet again wait till you get it
thebroken
-
Title: 1.6 Adapter Is Here!
Post by: Artifex on March 07, 2005, 10:29:00 AM
-
Post by: thebroken on March 07, 2005, 10:17:00 AM
thebroken
Post by: Artifex on March 07, 2005, 10:29:00 AM
QUOTE(acemilo @ Mar 7 2005, 03:06 AM)
Hey artifex, you still never mentioned the alt 5v source. I understand that your are bothered when someone knocks your product, but he is right, the adapter will not work with an x3 on a 1.6. The x3 needs the alt 5v source and there is no method of getting that power from your adapter. Sorry, but its the truth.
-
Title: 1.6 Adapter Is Here!
Post by: mooks on March 07, 2005, 01:59:00 PM
-
-
Title: 1.6 Adapter Is Here!
Post by: cblaz86 on March 07, 2005, 02:18:00 PM
-
Just received my S.P. Ice!! I'm going to put it in right after I head to Best Buy for a hard drive. Oh, and the surprise is a $5.00 rebate, very generous of modwhiz to make up for the delays. Quick question, if need be, can I install a 7200 rpm in the Xbox? Thanks in advance.
-
Title: 1.6 Adapter Is Here!
Post by: nylaptop on March 07, 2005, 02:28:00 PM
-
Post by: mooks on March 07, 2005, 01:59:00 PM
QUOTE(Artifex @ Mar 7 2005, 04:35 PM)
Post by: cblaz86 on March 07, 2005, 02:18:00 PM
Post by: nylaptop on March 07, 2005, 02:28:00 PM
QUOTE(cblaz86 @ Mar 7 2005, 04:24 PM)
Just received my S.P. Ice!! I'm going to put it in right after I head to Best Buy for a hard drive. Oh, and the surprise is a $5.00 rebate, very generous of modwhiz to make up for the delays. Quick question, if need be, can I install a 7200 rpm in the Xbox? Thanks in advance.
-
Title: 1.6 Adapter Is Here!
Post by: acemilo on March 07, 2005, 02:32:00 PM
-
I'm still trying to figure out how they plan on getting the alt 5v without using pin 6. Care to shed any DETAILS on this artifex? All you said was it is gonna have configurations, yet you give no details on this. All I would like to know is how do you plan on getting the alt 5v? And for the record, I was quite good at wheres waldo puzzles and there is no need to be a smart ass. All I did was merely bring up a valid point that there is no NOTICEABLE way to get the alt 5v from the pics YOU released. All I would like to know is how you go about getting the 5v from a source other than pin 6.
-
Title: 1.6 Adapter Is Here!
Post by: cblaz86 on March 07, 2005, 02:43:00 PM
-
http://www.bestbuy.c...d=1051384641627
Good for Xbox or no?
-
Title: 1.6 Adapter Is Here!
Post by: gamersha794 on March 07, 2005, 02:59:00 PM
-
go check in the stickies for the HD compatability link
-
Title: 1.6 Adapter Is Here!
Post by: Artifex on March 07, 2005, 03:10:00 PM
-
Post by: acemilo on March 07, 2005, 02:32:00 PM
Post by: cblaz86 on March 07, 2005, 02:43:00 PM
Good for Xbox or no?
Post by: gamersha794 on March 07, 2005, 02:59:00 PM
Post by: Artifex on March 07, 2005, 03:10:00 PM
QUOTE(acemilo @ Mar 7 2005, 09:38 PM)
I'm still trying to figure out how they plan on getting the alt 5v without using pin 6. Care to shed any DETAILS on this artifex? All you said was it is gonna have configurations, yet you give no details on this. All I would like to know is how do you plan on getting the alt 5v? And for the record, I was quite good at wheres waldo puzzles and there is no need to be a smart ass. All I did was merely bring up a valid point that there is no NOTICEABLE way to get the alt 5v from the pics YOU released. All I would like to know is how you go about getting the 5v from a source other than pin 6.
-
Title: 1.6 Adapter Is Here!
Post by: -copyguy- on March 07, 2005, 03:17:00 PM
-
Post by: -copyguy- on March 07, 2005, 03:17:00 PM
QUOTE(DJSymmetry @ Mar 7 2005, 05:21 PM)
has anyone else preordered with divineo and still not recieved a fedex tracking number? I am getting impatient, I guess I'll go modwhiz next time.
-
Title: 1.6 Adapter Is Here!
Post by: -copyguy- on March 07, 2005, 03:20:00 PM
-
Post by: -copyguy- on March 07, 2005, 03:20:00 PM
QUOTE(Artifex @ Mar 7 2005, 05:16 PM)
No, I'm afraid I can't give you DETAILS just yet. You'll get DETAILS in good time, when the X3 configuration is released. The configuration point for the Alt-5v is, indeed, NOTICEABLE in the pictures that WE released.
-
Title: 1.6 Adapter Is Here!
Post by: cblaz86 on March 07, 2005, 03:23:00 PM
-
Post by: cblaz86 on March 07, 2005, 03:23:00 PM
QUOTE(gamersha794 @ Mar 7 2005, 10:05 PM)
go check in the stickies for the HD compatability link
-
Title: 1.6 Adapter Is Here!
Post by: Polup on March 07, 2005, 03:56:00 PM
-
Excuse me for the incredibly noobish question. But is getting a new hard drive a must have if you plan on installing the SP.ICE? Or for that matter any modchip?
Also what do you guys think of modchipstore.com? I pre-ordered the Official Xodus Xenium SP.ICE Modchip and adapter from them. Are they trustworthy?
-
Title: 1.6 Adapter Is Here!
Post by: DJSymmetry on March 07, 2005, 04:12:00 PM
-
Post by: Polup on March 07, 2005, 03:56:00 PM
Also what do you guys think of modchipstore.com? I pre-ordered the Official Xodus Xenium SP.ICE Modchip and adapter from them. Are they trustworthy?
Post by: DJSymmetry on March 07, 2005, 04:12:00 PM
QUOTE(Polup @ Mar 7 2005, 04:02 PM)
is getting a new hard drive a must have if you plan on installing the SP.ICE? Or for that matter any modchip?
-
Title: 1.6 Adapter Is Here!
Post by: appleguru on March 07, 2005, 07:02:00 PM
-
Post by: appleguru on March 07, 2005, 07:02:00 PM
QUOTE(cblaz86 @ Mar 7 2005, 07:59 PM)
Can anyone point me to the direction of a guide or any kind of help? I'm pretty lost.
-
Title: 1.6 Adapter Is Here!
Post by: christineyoung on March 07, 2005, 07:12:00 PM
-
Artifex: Not sure if i received different model but X-Chip will not fit ( too close to case edge) . Did you try yourselves with X-Chip or assumed would work. It is a longer board then others.
-
Title: 1.6 Adapter Is Here!
Post by: thebroken on March 07, 2005, 07:38:00 PM
-
Post by: christineyoung on March 07, 2005, 07:12:00 PM
Post by: thebroken on March 07, 2005, 07:38:00 PM
QUOTE(christineyoung @ Mar 7 2005, 07:18 PM)
Artifex: Not sure if i received different model but X-Chip will not fit ( too close to case edge) . Did you try yourselves with X-Chip or assumed would work. It is a longer board then others.
-
Title: 1.6 Adapter Is Here!
Post by: cblaz86 on March 07, 2005, 08:01:00 PM
-
Help? I have no idea how to screw this thing in.
-
Title: 1.6 Adapter Is Here!
Post by: sitlet on March 07, 2005, 08:07:00 PM
-
perhaps a screwdriver?
didnt the sp.ice come with any instructions???
-
Title: 1.6 Adapter Is Here!
Post by: christineyoung on March 07, 2005, 08:38:00 PM
-
cblaz86: Righty tighty, lefty loosey
-
Title: 1.6 Adapter Is Here!
Post by: cblaz86 on March 07, 2005, 09:25:00 PM
-
Got it in. The Xenium screen is awesome to see for the first time.
Now to figure out what to do from here.
-
Title: 1.6 Adapter Is Here!
Post by: cblaz86 on March 07, 2005, 10:08:00 PM
-
Ran into trouble. After I set up the original BIOS and tried running with them, I got a "service required, call customer support" error screen. Why did this happen, is there something wrong with the installation?
EDIT:
Nevermind, just had to lock the HD.
-
Title: 1.6 Adapter Is Here!
Post by: SagaraSosuke on March 08, 2005, 05:52:00 AM
-
I need this clarified:
Using the 1.6 adapter, can I install the X3 chip without any soldering whatsoever? That includes, D0, HD, and Lan wire solders, etc. Yes or no?
-
Title: 1.6 Adapter Is Here!
Post by: 2XNKOTE on March 08, 2005, 07:56:00 AM
-
-
Title: 1.6 Adapter Is Here!
Post by: -copyguy- on March 08, 2005, 08:25:00 AM
-
Post by: cblaz86 on March 07, 2005, 08:01:00 PM
Post by: sitlet on March 07, 2005, 08:07:00 PM
didnt the sp.ice come with any instructions???
Post by: christineyoung on March 07, 2005, 08:38:00 PM
Post by: cblaz86 on March 07, 2005, 09:25:00 PM
Now to figure out what to do from here.
Post by: cblaz86 on March 07, 2005, 10:08:00 PM
EDIT:
Nevermind, just had to lock the HD.
Post by: SagaraSosuke on March 08, 2005, 05:52:00 AM
Using the 1.6 adapter, can I install the X3 chip without any soldering whatsoever? That includes, D0, HD, and Lan wire solders, etc. Yes or no?
Post by: 2XNKOTE on March 08, 2005, 07:56:00 AM
Post by: -copyguy- on March 08, 2005, 08:25:00 AM
QUOTE(2XNKOTE @ Mar 8 2005, 10:02 AM)
yeah i havent got my modwiz tracking either, i paid for it on friday 21st feb or something, 2-3 days delivery, still not here and they dont respond to emails
-
Title: 1.6 Adapter Is Here!
Post by: VampireHunter on March 08, 2005, 01:44:00 PM
-
I got my tracking number from diveneo on Friday March 4th. So I should have it today or tomorrow... I hope.
-
Title: 1.6 Adapter Is Here!
Post by: appleguru on March 08, 2005, 02:14:00 PM
-
Post by: VampireHunter on March 08, 2005, 01:44:00 PM
Post by: appleguru on March 08, 2005, 02:14:00 PM
QUOTE(nfidel @ Mar 8 2005, 03:10 PM)
Why does Xodus claim this is a universal adapter? Got mine today and the plastic guide would not fit on the two early model Xboxes I tried. Anyone succeeded in getting this to work with 1.0 or 1.1 models?
-
Title: 1.6 Adapter Is Here!
Post by: nfidel on March 08, 2005, 02:36:00 PM
-
Post by: nfidel on March 08, 2005, 02:36:00 PM
QUOTE(appleguru @ Mar 8 2005, 09:20 PM)
I could be wrong, but I'm pretty sure you only use the guide for 1.6 installs... for 1.0/1.1 models I'm pretty sure you just use the black base part of the adapter.
-
Title: 1.6 Adapter Is Here!
Post by: 2XNKOTE on March 08, 2005, 02:50:00 PM
-
Post by: 2XNKOTE on March 08, 2005, 02:50:00 PM
QUOTE(-copyguy- @ Mar 8 2005, 03:31 PM)
Yep, their web page states that ALL preorders have been shipped...Still no tracking number on my account on their page or in my email...also, no response in their IRC channel (from them)...
-
Title: 1.6 Adapter Is Here!
Post by: acemilo on March 08, 2005, 02:59:00 PM
-
Post by: acemilo on March 08, 2005, 02:59:00 PM
QUOTE(nfidel @ Mar 8 2005, 09:42 PM)
Problem is, without using the plastic guide it seems impossible to align the wires. The video and all the guides assume you are using the guide. Has anyone managed to get this to work w/o the guide?
-
Title: 1.6 Adapter Is Here!
Post by: nfidel on March 08, 2005, 04:22:00 PM
-
Post by: nfidel on March 08, 2005, 04:22:00 PM
QUOTE(acemilo @ Mar 8 2005, 10:05 PM)
LMAO the problems begin! The plastic piece seems to be only needed if you are using it on a 1.6. If your not using a 1.6, then there is no need for that whole piece, just use the lower part.
-
Title: 1.6 Adapter Is Here!
Post by: -copyguy- on March 08, 2005, 04:51:00 PM
-
Post by: -copyguy- on March 08, 2005, 04:51:00 PM
QUOTE(christineyoung @ Mar 7 2005, 09:18 PM)
Artifex: Not sure if i received different model but X-Chip will not fit ( too close to case edge) . Did you try yourselves with X-Chip or assumed would work. It is a longer board then others.
-
Title: 1.6 Adapter Is Here!
Post by: 2XNKOTE on March 08, 2005, 05:47:00 PM
-
-
Title: 1.6 Adapter Is Here!
Post by: Artifex on March 09, 2005, 03:08:00 AM
-
**SIGH**
The plastic guide and white pcb are only for 1.6 boxes. On 1.0-1.4 you only need to use the bottom black peice.
And, please, let me re-iterate, the adapter which is shipped with the SPICE package is configured for the Xenium ICE only. Additional configurations for the x3, xchip, etc will be available shortly.
--Artifex
-
Title: 1.6 Adapter Is Here!
Post by: pinda003 on March 09, 2005, 05:01:00 AM
-
anyone with no patience mailed divineo.co.uk and knows when they are going to ship ?
i figured most things out how to install and bladibla.. just download the iceguide from www.teamxodus.com. It tells you where to find hdd's you can use, what bios will work on the v1.6 xbox's (in my case) and everything you need to know after you plugged your ice chip in! It does help when people say you must read stuff!
The awnser is on the internet. No doubt.
Greetz
Pinda
-
Title: 1.6 Adapter Is Here!
Post by: pinda003 on March 09, 2005, 06:11:00 AM
-
-
Title: 1.6 Adapter Is Here!
Post by: -copyguy- on March 09, 2005, 06:27:00 AM
-
Post by: 2XNKOTE on March 08, 2005, 05:47:00 PM
Post by: Artifex on March 09, 2005, 03:08:00 AM
The plastic guide and white pcb are only for 1.6 boxes. On 1.0-1.4 you only need to use the bottom black peice.
And, please, let me re-iterate, the adapter which is shipped with the SPICE package is configured for the Xenium ICE only. Additional configurations for the x3, xchip, etc will be available shortly.
--Artifex
Post by: pinda003 on March 09, 2005, 05:01:00 AM
anyone with no patience mailed divineo.co.uk and knows when they are going to ship ?
i figured most things out how to install and bladibla.. just download the iceguide from www.teamxodus.com. It tells you where to find hdd's you can use, what bios will work on the v1.6 xbox's (in my case) and everything you need to know after you plugged your ice chip in! It does help when people say you must read stuff!
The awnser is on the internet. No doubt.
Greetz
Pinda
Post by: pinda003 on March 09, 2005, 06:11:00 AM
Post by: -copyguy- on March 09, 2005, 06:27:00 AM
QUOTE(Visionary @ Mar 9 2005, 07:39 AM)
What about the SP Adapter that is shipping without the SPICE package? It is being advertised and sold as (and as you previously stated) a solderless solution for all modern chips.
-
Title: 1.6 Adapter Is Here!
Post by: Artifex on March 09, 2005, 06:35:00 AM
-
Let me say it again...
The SP adapter itself is designed to be flexible enough to work with all chips.
The SP adapter which ships with the SPICE is configured to be solderless with the ICE it ships with.
The adapter can be reconfigured during assembly at factory for other chips. Currently, the only configuration being shipped is the SPICE (Xenium ICE compatible) configuration. The X3/Xchip/Smartxx configurations have additional pogos, alt-5v attachment, etc... as necessary. These configurations will be available soon.
I noticed that on Divineo's page, the text describing the SP is incorrect, and does not mention this fact. We will contact divineo and ask them to update the description accordingly.
--Artifex
-
Title: 1.6 Adapter Is Here!
Post by: acemilo on March 09, 2005, 02:57:00 PM
-
You have to wait until xodus decides to release them.
-
Title: 1.6 Adapter Is Here!
Post by: acemilo on March 09, 2005, 03:09:00 PM
-
http://www.teamxodus...als/S.P.Ice.pdf
-
Title: 1.6 Adapter Is Here!
Post by: 2XNKOTE on March 09, 2005, 03:26:00 PM
-
also my spice just arrived in england so i should get it soon
-
Title: 1.6 Adapter Is Here!
Post by: Gumba on March 09, 2005, 05:50:00 PM
-
Post by: Artifex on March 09, 2005, 06:35:00 AM
The SP adapter itself is designed to be flexible enough to work with all chips.
The SP adapter which ships with the SPICE is configured to be solderless with the ICE it ships with.
The adapter can be reconfigured during assembly at factory for other chips. Currently, the only configuration being shipped is the SPICE (Xenium ICE compatible) configuration. The X3/Xchip/Smartxx configurations have additional pogos, alt-5v attachment, etc... as necessary. These configurations will be available soon.
I noticed that on Divineo's page, the text describing the SP is incorrect, and does not mention this fact. We will contact divineo and ask them to update the description accordingly.
--Artifex
Post by: acemilo on March 09, 2005, 02:57:00 PM
Post by: acemilo on March 09, 2005, 03:09:00 PM
Post by: 2XNKOTE on March 09, 2005, 03:26:00 PM
also my spice just arrived in england so i should get it soon
Post by: Gumba on March 09, 2005, 05:50:00 PM
QUOTE(acemilo @ Mar 10 2005, 08:15 AM)
http://www.teamxodus...als/S.P.Ice.pdf
-
Title: 1.6 Adapter Is Here!
Post by: Rabid1 on March 09, 2005, 06:26:00 PM
-
Post by: Rabid1 on March 09, 2005, 06:26:00 PM
QUOTE(Gumba @ Mar 10 2005, 12:56 AM)
I think a 1.0-1.4 guide would be a good idea too.
-
Title: 1.6 Adapter Is Here!
Post by: acemilo on March 09, 2005, 07:25:00 PM
-
Post by: acemilo on March 09, 2005, 07:25:00 PM
QUOTE(HeavyM @ Mar 10 2005, 02:10 AM)
alright i might be missing this somewhere.. but whats the difference between the SPICE and the ICE solderless? does the SPICE only benefit the 1.6 box?
-
Title: 1.6 Adapter Is Here!
Post by: christineyoung on March 09, 2005, 09:34:00 PM
-
Now if it becomes true that all SP's out will not work with other modchips solderlessly and all people require new one or add on board, I think we should hit Xodus the same way they hit clone sellers. Return SP's demand money back and STOP credit Card payments, expect nothing more then the product you ordered and payed for! Unless they are willing to ship proper parts to all owners free of charge. Only time will tell. Also note it is now appearing as SP - ICE adapter( Ice as in there own chip and only work on ther chip ) on sites today rather then SP adapter a few days ago.
They are now stating design to be changed at manufacturer for other chips which equals redesign of PCB and adding of pogo pins for other modchips, which means the adapter you have now will not work with other modchips as is solderlessly, and will require soldering to us as is.
As for everyone with pre-1.6's it was clearly stated only to use the black plastic mold as if normal solderless adapter.
For poeple using a 5V modchip, remove pogo pin #6 and solder 5V direct from motherboard, one wire is better then 5.
-
Title: 1.6 Adapter Is Here!
Post by: cblaz86 on March 09, 2005, 11:20:00 PM
-
I broke something.
On my second install attempt with the SP adapter, I snapped off one of the five copper wires that connect to the center of the holes.
Please tell me I can just solder this back in.
-
Title: 1.6 Adapter Is Here!
Post by: Artifex on March 09, 2005, 11:32:00 PM
-
-
Title: 1.6 Adapter Is Here!
Post by: HSDEMONZ on March 10, 2005, 01:44:00 AM
-
Post by: christineyoung on March 09, 2005, 09:34:00 PM
They are now stating design to be changed at manufacturer for other chips which equals redesign of PCB and adding of pogo pins for other modchips, which means the adapter you have now will not work with other modchips as is solderlessly, and will require soldering to us as is.
As for everyone with pre-1.6's it was clearly stated only to use the black plastic mold as if normal solderless adapter.
For poeple using a 5V modchip, remove pogo pin #6 and solder 5V direct from motherboard, one wire is better then 5.
Post by: cblaz86 on March 09, 2005, 11:20:00 PM
On my second install attempt with the SP adapter, I snapped off one of the five copper wires that connect to the center of the holes.
Please tell me I can just solder this back in.
Post by: Artifex on March 09, 2005, 11:32:00 PM
QUOTE(christineyoung @ Mar 10 2005, 04:40 AM)
Now if it becomes true that all SP's out will not work with other modchips solderlessly and all people require new one or add on board, I think we should hit Xodus the same way they hit clone sellers. Return SP's demand money back and STOP credit Card payments, expect nothing more then the product you ordered and payed for!
Post by: HSDEMONZ on March 10, 2005, 01:44:00 AM
QUOTE(christineyoung @ Mar 9 2005, 11:40 PM)
Now if it becomes true that all SP's out will not work with other modchips solderlessly and all people require new one or add on board, I think we should hit Xodus the same way they hit clone sellers. Return SP's demand money back and STOP credit Card payments, expect nothing more then the product you ordered and payed for! Unless they are willing to ship proper parts to all owners free of charge. Only time will tell. Also note it is now appearing as SP - ICE adapter( Ice as in there own chip and only work on ther chip ) on sites today rather then SP adapter a few days ago.
-
Title: 1.6 Adapter Is Here!
Post by: acemilo on March 10, 2005, 02:19:00 AM
-
Glad to see you are on top of things. I agree that ppl should be pissed if they were misled, but realistically you have to deal with resellers: the ppl that sold you the chip. I have been quite public in pointing out the flaws of this adapter and the misconceptions of most ppl that it will work with an x3 right now solderlessly, but there really is no need to get all bent out of shape over it. It is messed up tho that xodus waited until today (or yesterday depending on how you look at the time) to announce that there will be "configurations." All it boils down to is if you bought this and expected it to work with an x3 or x2.6, return it to your reseller and let teamxodus now why you did so.
-
Title: 1.6 Adapter Is Here!
Post by: Artifex on March 10, 2005, 02:42:00 AM
-
Post by: acemilo on March 10, 2005, 02:19:00 AM
Post by: Artifex on March 10, 2005, 02:42:00 AM
QUOTE(HSDEMONZ @ Mar 10 2005, 08:50 AM)
I'll tell you what concerns me...
-
Title: 1.6 Adapter Is Here!
Post by: HSDEMONZ on March 10, 2005, 03:18:00 AM
-
Too much.
Maybe I'll start checking all my email again, and see who else in the scene plays these games..
-
Title: 1.6 Adapter Is Here!
Post by: 2XNKOTE on March 10, 2005, 05:39:00 AM
-
Post by: HSDEMONZ on March 10, 2005, 03:18:00 AM
Too much.
Maybe I'll start checking all my email again, and see who else in the scene plays these games..
Post by: 2XNKOTE on March 10, 2005, 05:39:00 AM
QUOTE(cblaz86 @ Mar 10 2005, 06:26 AM)
I broke something.
-
Title: 1.6 Adapter Is Here!
Post by: msjf on March 10, 2005, 08:46:00 AM
-
Sweet...Go team Xodus
-
Title: 1.6 Adapter Is Here!
Post by: HSDEMONZ on March 10, 2005, 09:07:00 AM
-
http://www.pictures....005/S.P.Ice.pdf
Post by: msjf on March 10, 2005, 08:46:00 AM
Post by: HSDEMONZ on March 10, 2005, 09:07:00 AM
QUOTE
XENIUM SPICE NOW SHIPPING:
We are proud to announce that our much anticipated bundled package including, Xenium, Xsorease and our brand new 1.6 compatible adaptor are now shipping. As expected, with the release of yet another revolutionary product, demand has been overwhelming and we have been working night and day to fulfill back orders. We are glad to announce that we are now on track and that orders are shipping.
IMPORTANT CLARIFICATION
Despite our clear and concise announcements it appears that some retailers have caused confusion in the market by trying to separate the special SPICE bundle pack to sell adaptors separately. This will not work! We would like to make it clear to all that there is a distinct difference between the SPICE adaptor and the Xodus SP adaptor (not yet released).
The SPICE bundle pack has an adaptor that works off 3.3 volts and will work with chips that are 3.3 volts ONLY. It will not work with other chips.
The SP adaptor is the universal one that will work with other chips and it is not yet released. We have individually contacted retailers to clarify these points once again and we are ensuring that confusing text on sites is being rectified immediately. Our specially configured adaptor for the SPICE bundle is just that, specially configured and should not be confused in any way whatsoever with the universal SP adaptor designed for all other chips. We trust that the point is now made and that the difference is now crystal clear to all.
INSTALL MANUALS HERE
Included in this post are the install manuals that many of you have been waiting for. (Manual). Updated manuals for the 1.0 - 1.4 install will follow shortly.
We are proud to announce that our much anticipated bundled package including, Xenium, Xsorease and our brand new 1.6 compatible adaptor are now shipping. As expected, with the release of yet another revolutionary product, demand has been overwhelming and we have been working night and day to fulfill back orders. We are glad to announce that we are now on track and that orders are shipping.
IMPORTANT CLARIFICATION
Despite our clear and concise announcements it appears that some retailers have caused confusion in the market by trying to separate the special SPICE bundle pack to sell adaptors separately. This will not work! We would like to make it clear to all that there is a distinct difference between the SPICE adaptor and the Xodus SP adaptor (not yet released).
The SPICE bundle pack has an adaptor that works off 3.3 volts and will work with chips that are 3.3 volts ONLY. It will not work with other chips.
The SP adaptor is the universal one that will work with other chips and it is not yet released. We have individually contacted retailers to clarify these points once again and we are ensuring that confusing text on sites is being rectified immediately. Our specially configured adaptor for the SPICE bundle is just that, specially configured and should not be confused in any way whatsoever with the universal SP adaptor designed for all other chips. We trust that the point is now made and that the difference is now crystal clear to all.
INSTALL MANUALS HERE
Included in this post are the install manuals that many of you have been waiting for. (Manual). Updated manuals for the 1.0 - 1.4 install will follow shortly.
http://www.pictures....005/S.P.Ice.pdf