OG Xbox Forums => Modchip Forums => All other Alternative Modchips and Cheapmods => Topic started by: sohx801 on September 27, 2005, 11:11:00 PM
Title: Duox 2 White Probs W/ V1.6
Post by: sohx801 on September 27, 2005, 11:11:00 PM
So,
I recently put in the DuoX 2 white modchip into a xbox v1.6 and I thought I did a pretty good job installing and then I have jumped into problems now. I did a check with the LPC voltages and everything seems to be working. The LED indicator light flashes (presumably working?) and the Evox logo displays upon boot-up. My problem is it shows the logo when booting and then goes straight to the Xbox needs to be serviced screen. regardless if I hold the button down on eject or power or just tap. Boot discs won't work either, does this sound like a pin that's off? I installed verbatimly according to the duomodchip.com diagram.
Any ideas?
Thanks
Title: Duox 2 White Probs W/ V1.6
Post by: quant1c0n on September 28, 2005, 01:26:00 AM
Title: Duox 2 White Probs W/ V1.6
Post by: Ughh on September 28, 2005, 02:25:00 PM
well from what i read is it goes to the MS dash if you didnt load a dash see if it will play a bunt dvd of a game ez way to tell
try to use dvd-r for boot disks works best for me
This post has been edited by Ughh: Sep 28 2005, 09:26 PM
Title: Duox 2 White Probs W/ V1.6
Post by: Chancer on September 28, 2005, 02:38:00 PM
QUOTE
then goes straight to the Xbox needs to be serviced screen. regardless i
QUOTE
well from what i read is it goes to the MS dash
You need reading lessons I am afraid. see first quote
Title: Duox 2 White Probs W/ V1.6
Post by: Ughh on September 28, 2005, 03:00:00 PM
Opps guess i do
Title: Duox 2 White Probs W/ V1.6
Post by: sohx801 on September 29, 2005, 10:49:00 AM
OK,
So I found what it was... when I put the board back in the lower plastic box.. one of the wires pulled of from snagging on something. After I re-soldered it works fine now. Sorry for the troubles..