Topic: Problems After Tsop Flashing (Read 55 times)

[BFA]AMD · « **on:** November 01, 2003, 08:16:00 AM »

hello!
I have the following problem:
I flashed the tsop d6 bios on my lpc modded xbox. after that, there was this error, that my xbox started, but the screen stayed black. after that i read, that the "a18" and "a19" should be grounded or on the + potential another connection from my modchip should be removed. so did i and then the xbox was able to boot. but the problem is now, that the modchip is some kind of disabled... I get the error 16 when i wannt to boot, that's because evo-x is still installed...
now my question: what do i have to do now?

thank you for your help

greetz...

venturahighway · « **Reply #1 on:** November 01, 2003, 08:28:00 AM »

would you like to flash your tsop?
or restore your modchip to a bootable bios?

you didn't need to do anything to A19 or A18.

disable (turn off or cut D0, ect..) your modchip approxamatly 1 second after you power on and it may start.

may need to ground A15 too.

[BFA]AMD · « **Reply #2 on:** November 01, 2003, 09:16:00 AM »

i don't think that i need a multi boot bios... i would be very lucky when the bios would be like it was before, this means no tsop...

ok... i grounded a15 and with that i was able to boot

i booted evo-x from cd, but wasn't able to flash the bios... i removed a15 when the xbox booted...
what is my fault now??

venturahighway · « **Reply #3 on:** November 01, 2003, 11:11:00 AM »

the procedure you are following is for flashing the tsop. it is failing because the write enable points are open.

i don't know if it is possible that you can boot that bios on a lpc mod and then flash the lpc mod.

i think you will need to do a hot swap with another modchip to refash it.

anyone know?

you could make your tsop dual boot with a switch on A19, and just forget the modchip.

venturahighway · « **Reply #4 on:** November 01, 2003, 11:14:00 AM »

QUOTE ([BFA]AMD @ Nov 1 2003, 06:05 PM)

i don't think that i need a multi boot bios...

or just flash the whole tsop. make a backup first in evox.

[BFA]AMD · « **Reply #5 on:** November 01, 2003, 08:10:00 PM »

QUOTE (venturahighway @ Nov 1 2003, 08:03 PM)

QUOTE ([BFA]AMD @ Nov 1 2003, 06:05 PM)

i don't think that i need a multi boot bios...

or just flash the whole tsop. make a backup first in evox.

the problem is how i could flash the whole tsop... in evox, there is the message, that the modchip is write-protected...
i would prefer if i could flash my bios like it was before... but if there is no other way, it would also be ok
anyone got an idea?

[BFA]AMD · « **Reply #6 on:** November 04, 2003, 11:21:00 AM »

hi again
i have still the problem that my xbox doesn't really work. i can now boot it manually with the D0 removal, but i'd like that i "work" normally.
what are my possibilities? i'd like to use evo-x and linux again on my xbox...

thanks for your help!

greetz...

venturahighway · « **Reply #7 on:** November 04, 2003, 12:00:00 PM »

you have two choices:

option 1. flash tsop
solder the tsop write enable points.
do your trick to boot.
unground A15
do backup
flash tsop with 1M X-4977 or Evox-M7

option 2. reprogram modchip
buy an external programmer or

boot with somone else's modchip
hotswap with yours
reflash

Zedek · « **Reply #8 on:** November 04, 2003, 12:03:00 PM »

QUOTE (venturahighway @ Nov 4 2003, 08:49 PM)

you have two choices:

option 1. flash tsop
solder the tsop write enable points.
do your trick to boot.
unground A15
do backup
flash tsop with 1M X-4977 or Evox-M7

option 2. reprogram modchip
buy an external programmer or

boot with somone else's modchip
hotswap with yours
reflash

Wouldn't that be like 2.5 choices?

Author Topic: Problems After Tsop Flashing (Read 55 times)