Topic: Help! Flashed 1mb Bios With 256k (Read 169 times)

venturahighway · « **Reply #15 on:** October 30, 2003, 08:27:00 AM »

wait till the 007 is at the load game screen (to be safe), then cut, then load hack-save.

you don't need 007 any more. you could make an evox disk now that you are running a hacked bios.

shit, try 007 anyway.

on second thought, load the save-hack, then cut, then flash. (should not matter)
be sure to cut both and don't leave A19 and A18 connected together..

Alpha1337 · « **Reply #16 on:** October 30, 2003, 08:40:00 AM »

wait i think i understand, boot 007, load the save, cut, telnet, flash

venturahighway · « **Reply #17 on:** October 30, 2003, 08:45:00 AM »

sounds good.

Zedek · « **Reply #18 on:** October 30, 2003, 10:47:00 AM »

be sure and cut one wire at a time and not both at the same time....that would short out those wires and could possibly smoke your box

HermeS404 · « **Reply #19 on:** November 28, 2003, 07:07:00 AM »

I made the same mistake (stupid me |

).

I tried this advice and it worked great for me too! So big thanks!

btw: you must cut the wire when the raincoat image has (completly) loaded! If you cut them before (during xbox startup or when you are in AUF) and load the gamesave the screen goes black and the front led keeps burning green (instead of orange, so isn't loaded raincoat).

PsiDOC · « **Reply #20 on:** November 28, 2003, 11:16:00 AM »

Search using my nick, you'll find it.
Regards,
Psi

Henrideath · « **Reply #21 on:** December 04, 2003, 03:35:00 PM »

http://forums.xbox-s...T&f=43&t=131986

Author Topic: Help! Flashed 1mb Bios With 256k (Read 169 times)