Print

[DaShiZNiT]

QUOTE

xbox-linux login: root Password: BusyBox v0.60.5-xbox (2003.02.17-17:02+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands. sh: can't access tty; job control turned off Get more Linux at http://xbox-linux.sf.net/. # cd ../../media/E/UDATA/4541000d/000000000000/raincoat # ls bios.bin       raincoat       raincoat.conf # ./raincoat -r originalbios.bin raincoat Flasher  0.5  Apr 14 2003  [email protected]  http://xbox-linux.sf.net Reading /etc/raincoat.conf... (unable to open /etc/raincoat.conf, using default list) DETECTED: Winbond W49F020 (256K) Reading back to originalbios.bin... Completed # ./raincoat -p bios.bin raincoat Flasher  0.5  Apr 14 2003  [email protected]  http://xbox-linux.sf.net Reading /etc/raincoat.conf... (unable to open /etc/raincoat.conf, using default list) DETECTED: Winbond W49F020 (256K) Programming with bios.bin...Read 262144 bytes from file Erasing... Trying to erase whole chip   Done Programming...   Done Verifying...   Done Completed

[DaShiZNiT]

Oh, and I DID have the W490f20t-90b chip in question...

[_KC_]

I'm trying to flash this chip using the ber & ernie exploit, I've checked my soilder points, all okay. I'm having the same problems as everyone else, can anyone confirm if the have flashed this chip from evox, and if so what line did you use in the evox.ini

[NeoKast]

Add me to the list. I just soldered the top two points, and have the lines added in my evox.ini for this bios and it's failing.

[EBear]

1.4 winbond W49F020T-90B Tried it and says I need to add device in raincoat.conf. I put all of the winbond lines I have come accross on these forums but no dice. Anyone flash this chip?

[NeoKast]

I'm trying as we speak. What if I solder the bottom point as well?

I'm confident it's not a soldering problem (unless you need an additional point), because before I soldered, I got "not writeable", and after, it hangs on "Erasing".

This is using an updated evox.ini with all of the lines for Winbond added.

Someone, shed some light on this, we need to flash this chip.

[wd-40]

QUOTE (EBear @ Nov 7 2003, 05:23 AM)

1.4 winbond W49F020T-90B Tried it and says I need to add device in raincoat.conf. I put all of the winbond lines I have come accross on these forums but no dice. Anyone flash this chip?

Yes.. goto this link and d/l this rain 007 package... you should be good to go afterwards.

http://www.nuave.com/xbox-scene

[wd-40]

QUOTE (NeoKast @ Nov 7 2003, 05:25 AM)

I'm trying as we speak. What if I solder the bottom point as well? I'm confident it's not a soldering problem (unless you need an additional point), because before I soldered, I got "not writeable", and after, it hangs on "Erasing". This is using an updated evox.ini with all of the lines for Winbond added. Someone, shed some light on this, we need to flash this chip.

You won't be able to flash this through Evo-X 007 gamesave.  You need to use the raincoat version.  Read above and grab the package from the url I posted.  Should work for you after using this.  Nothing needs to be done to the zip file except changing the name to : AgentUnder_BONDAUF.zip before transfering to memory card.  Then just boot your xbox, copy the gamesave from memory card to hd and load up 007 and goto load game from harddisk and screen should go blank and you'll hear some poping and other stuff and your ready to begin.. Just d/l the instruction file at the url as well.  It's really simple..

[lunitic]

FLAME ME!!!!

I fixed the box this morning,
Wasnt anything with the raincoat..
It was me that had manage to drop some soldering on the resistor at one of the soldering points.
Took it away and then the box worked as a charm.

So thanks all that has tried to help.

//LUNI

[blaze_all_day]

I try to flash with evox my winbond And every time It a !!!not Writable!!!
W490f20t-90b. I try to change the line in evox to the one without the "T" W490f20-90b   then bugging in erasing.

After resolder many time. Always the same problem.  !not writable!! with one and bugging on erasing with the other.

Then I try raincoat 0.51 and it work like a charm. Don't know why evox won't work..maybe because i use 3752 version... I don't know.

But I confirm It possible to flash this tsop with raincoat!!

This is the line I use in evox.ini

Flash = 0xda8c,"Winbond - W49F020",0x40000 ---> Freeze on erasing
Flash = 0x0900,"Winbond W49F020T",0x40000 ---> !!!Not Writable!!!

In raincoat.conf I use this
Flash = 0x0900,"Winbond W49F020T",0x40000 ---> Working

[imperius]

Help me!! ... I flash tsop... with raincoat

code Flash = 0x0900,"Winbond W49F020T",0x40000      

but  now my xbox have led blinked forever...

And now what i make??
thanks all

[Exobex]

QUOTE (imperius @ Nov 8 2003, 08:37 AM)

Help me!! ... I flash tsop... with raincoat code Flash = 0x0900,"Winbond W49F020T",0x40000       but  now my xbox have led blinked forever... And now what i make?? thanks all

Probably because 0x0900 is NOT a valid flash type!  If this device is shown, it indicates that there's a problem with the soldering.  Whatever that device is, it looks like you've attempted to reprogram it.

The CORRECT line for a Winbond 49F020T (be it a -90B or whatever) is:-

Flash = 0xda8c,"Winbond - W49F020",0x40000

You can change the description, but the 0xDA8C and 0x40000 must remain.  Even the following will flash a Winbond 49F020:-

Flash = 0xda8c,"Bollocks 9000 (Ultra)",0x40000

[Exobex]

[xboxwbhacker]

Please can some send me a read me on how to use rain coat properly please i have a winbond v1.3 xbox apart here and i cant remeber how to run the command propmt

[xboxwbhacker]

Please can some send me a read me on how to use rain coat properly please i have a winbond v1.3 xbox apart here and i cant remeber how to run the command propmt