Print

[nitussi]

Just need to know if it can be done with 007 raincoat, because i cant seem to flash it without getting a "manf=0x20, dev=0xB0", which I assume means," Wrong device Id".


I have the new M7 bios.

My chip is a ST M29F002BT70N1.

Soldered the two top points, and the one on the bottom, like Ive done in the past on other xboxes.

This is my config file:

Flash = 0x01a4,"AMD - Am29F040B",0x80000
Flash = 0x01d5,"AMD - Am29F080B",0x100000
Flash = 0x01da,"AMD - Am29LV800B",0x100000
Flash = 0x015b,"AMD - Am29LV800B",0x100000
Flash = 0x378c,"AMIC - A29002",0x40000
Flash = 0x04d5,"FUJITSU - MBM29F080A",0x100000
Flash = 0xadb0,"Hynix - HY29F002",0x40000
Flash = 0xadd5,"Hynix - HY29F080",0x100000
Flash = 0xc236,"MACRONIX - MX29F022NTPC",0x40000
Flash = 0xbf61,"SST - SST49LF020",0x40000
Flash = 0x20b0,"ST - 29F002",0x40000
Flash = 0x20f1,"ST - M29F080A",0x100000
Flash = 0x89a6,"Sharp - LHF08CH1",0x100000
Flash = 0xda0b,"Winbond - W49F002U",0x40000
Flash = 0xda8c,"Winbond - W49F020",0x40000

Anyone tell me what im doing wrong?

Also, I just bought this box today...it came with clone wars and tetris...manufacture date is August 20, 2003.

This post has been edited by nitussi: Sep 27 2003, 05:35 AM

[KrayzieVanh]

I didn't know v1.4 and v1.5 were flashable yet. I've only seen v1.0-1.3 so far.

[Troed]

v1.4 is flashable, v1.5 I haven't tried myself but the only difference we know of between 1.4 and 1.5 has to do with LPC - not with the TSOP.

007 works - I flashed mine through EvoX and not raincoat though.

[crashnet2000]

Troed how did you flash it ? is there a Tuturial somewhere for 1.4?
i have a new on from 20030729 and i think it is 1.4

[fluidmax]

the V1.4 has the same mobo layout as the 1.3 just bridge the same points as if you were doing a v1.3

just open it up and if you have a focus video chip then it is a 1.4/1.5

This post has been edited by fluidmax: Sep 28 2003, 08:52 PM

[crashnet2000]

it is 1.4 and i have read somwhere that some bios doesnt work for some games it couses the tv to go black because of the new chip. is this true? i dont want to fuck up my girlfriends new xbox

[Troed]

You can only use EvoX M7 in a v1.4/v1.5 so far. Do NOT flash it with anything else - it won't go black - it will FRAG and you won't get a second chance (unless you solder in a 29-wire homebrew)

[Exobex]

QUOTE (nitussi @ Sep 27 2003, 04:14 AM)

Just need to know if it can be done with 007 raincoat, because i cant seem to flash it without getting a "manf=0x20, dev=0xB0", which I assume means," Wrong device Id". I have the new M7 bios. My chip is a ST M29F002BT70N1. Soldered the two top points, and the one on the bottom, like Ive done in the past on other xboxes.

What version of raincoat are you using?  0.3 doesn't support the newer flash types.  0.5 ignores the raincoat.conf.  0.501 reads it properly.  You've already got 20b0 in the list, so it ought to work.

Bottom points aren't needed, you've already linked them when doing the top points nearest the TSOP.

This post has been edited by Exobex: Sep 29 2003, 04:56 PM

[bccloser]

Just did a 1.4 or 1.5...

Strange thing...it would not flash with evox with proper info in the ini...
However I could flash with raincoat.

Later

[Troed]

QUOTE (bccloser @ Sep 30 2003, 04:07 AM)

Just did a 1.4 or 1.5... Strange thing...it would not flash with evox with proper info in the ini... However I could flash with raincoat. Later

bccloser: EvoX can't flash Winbond-chips - everything else should work. For Winbond raincoat 0.5+ is needed.

[Exobex]

Or 0.501