Topic: Cant Tsop Flash With V1.3 Hynix Tsop (Read 242 times)

lenny6998 · « **on:** August 12, 2003, 11:34:00 PM »

i soldered all the correct points but whenever i try to flash i get this error
raincoat Flasher 0.3 Feb 26 2003 [email protected] http://xbox-linux.sf.ne
Reading /etc/raincoat.conf... 12 flash types read

UNKNOWN DEVICE manf=0xAD, dev=0xB0
Try adding the device ID to /etc/raincoat.conf

I updated the config file to the latest i could find (v1.5) and still same error. If someone could help that woudl be awesome, thanks.

lenny6998 · « **Reply #1 on:** August 13, 2003, 08:04:00 AM »

Ok i added this line to the conf file but for somereason it didnt seem to want to recognize that entry. this is the entry i added, i guess there is something wrong with the syntax of it but i cant tell

Flash = 0xadb0,"Hynix - HY29F002",0x40000

Please if anyone help that would be wonderful. THANKS

Exobex · « **Reply #2 on:** August 13, 2003, 10:39:00 AM »

Your raincoat is too old.

lenny6998 · « **Reply #3 on:** August 13, 2003, 04:20:00 PM »

Is the one on xbins the latest one?

This post has been edited by lenny6998: Aug 13 2003, 11:37 PM

blaze_all_day · « **Reply #4 on:** August 14, 2003, 06:39:00 PM »

I use the version 0.5 of Raincoat

Xbox 1.3
Hynix - HY29F002TT

Does this TSOP need a 256 K or a 1024 K bios?

This post has been edited by blaze_all_day: Aug 15 2003, 12:45 PM

blaze_all_day · « **Reply #5 on:** August 15, 2003, 05:45:00 AM »

Some idea!!

Bump

polarz · « **Reply #6 on:** August 15, 2003, 06:55:00 AM »

QUOTE

I use the version 0.5 of Raincoat

try .501

{{909}} · « **Reply #7 on:** August 15, 2003, 11:01:00 AM »

1.3 need a 256k bios

i had to update the raincoat files to do a 1.3, i cant remember if it was a hynix tho

http://forums.xbox-scene.com/index.php?act...ST&f=43&t=81651

i used the guides here

just google for the latest raincoat, its just a linux app and is on some linux site i found

blaze_all_day · « **Reply #8 on:** August 15, 2003, 12:20:00 PM »

QUOTE (polarz @ Aug 15 2003, 01:44 PM)

QUOTE

I use the version 0.5 of Raincoat

try .501

I don't find the version 0.501

The only I find its 0.5 at this address http://xbox-linux.sf.net/down/raincoat-0.5.tar.gz

I gonna try this with a 256kb bios and this

Flash = 0xadb0,"Hynix - HY29F002",0x40000

Thanks 909 for your Help!!

stavrosg · « **Reply #9 on:** September 01, 2003, 06:32:00 PM »

looking for .501 too..... anyhelp would be appreciated..

Stav

polarz · « **Reply #10 on:** September 01, 2003, 08:58:00 PM »

raincoat-0.501

stavrosg · « **Reply #11 on:** September 02, 2003, 08:04:00 AM »

Thanks! The fast response was appreciated, but I had a box open in front of me and was depserate, so I recompiled .5+ on my linux box..

Nice to see that they finally load the raincoat.conf from the local dir.

FYI. It was a version 1.3, we got it to flash with the standard points of a 1.2, top and bottom of the board.....

Stav

Geremia · « **Reply #12 on:** September 02, 2003, 03:06:00 PM »

cp /media/E/UDATA/4541000d/000000000000/raincoat/raincoat.conf /etc/raincoat.conf

this should do the trick i think, instead of recompiling

Exobex · « **Reply #13 on:** September 02, 2003, 03:21:00 PM »

QUOTE (Geremia @ Sep 2 2003, 09:55 PM)

cp /media/E/UDATA/4541000d/000000000000/raincoat/raincoat.conf /etc/raincoat.conf

this should do the trick i think, instead of recompiling

Not in 007:AUF Linux, it won't. /etc is read-only.

barf · « **Reply #14 on:** November 02, 2003, 07:11:00 PM »

I can confirm these HY29F002T flashes are in 31xxx Xboxes in Christchurch, New Zealand and they flash faster than any other chip ive seen

BTW you 007auf hackers you can fix the RO filesystem problem with the following shell commands:
cp -Rp /tmp/etc /tmp/etc-
rm /tmp/etc
mv /tmp/etc- /tmp/etc

happy hacking

Author Topic: Cant Tsop Flash With V1.3 Hynix Tsop (Read 242 times)