Topic: XMugen-linux Beta v0.4 (Read 2217 times)

alexlexus · « **Reply #210 on:** May 23, 2006, 06:15:00 PM »

the new shortcut to mugen is really cool. good job guybird.

alg5 is this true we can not map the crtl and the 3 and 4 keys?

guybird · « **Reply #211 on:** May 23, 2006, 06:35:00 PM »

You're misunderstanding me Alex... I did map both the left control and the right control to both triggers (L & R). I then mapped 1 to A, and 3 to B. Mugen recognized these keys for what they were, and as far as it was concerned, I was really pushing the control buttons. I tried it in every way: Pushing control + 3 during the char's intro, during the begining of the round, during the round and got nothing. I then tried taking control in the Watch mode. I'd select two characters, and start mashing the control + 1 buttons. No response. Are we absolutely certain that the control + * works in Linmugen? I know most Winmugen functions are there but I'm having my doubts about this....

alg5 · « **Reply #212 on:** May 24, 2006, 02:51:00 AM »

for ctrl+3, best way would be to test with keyboard first, then joy2key

here is a joy2key2 with parameters support:

http://rapidshare.de...9/joy2key2.html

Vejita · « **Reply #213 on:** May 24, 2006, 02:55:00 AM »

I believe I may have the solution to your CTRL + 3/4 problems!

Have you enabled the DEBUG KEYS in mugen.cfg?

;Set to 1 to allow debug keys at all times. Otherwise debug keys
;allowed only in debug mode.
AllowDebugKeys = 1

Ken34 · « **Reply #214 on:** May 24, 2006, 09:05:00 AM »

ok..so exactly what would I need to do in order to set F1 as L or R?

Vejita · « **Reply #215 on:** May 24, 2006, 04:49:00 PM »

QUOTE(alexlexus @ May 24 2006, 07:49 PM)

since downloading the latest joy2key stuff my triggers don;t seem to respond to anything.
does this mean that the perameters thing will allow for mapping of keys to those buttons separatly?

Yeah.

This is the order of the parameters as outlined by guybird:

(Dpad up) (Dpad right) (Dpad down) (Dpad left) (Start) (Back) (A) (B) (X) (Y) (Black) (White) (L3) (R3) (Right analog up) (Right analog right) (Right analog down) (Right analog left) (L trigger) (R trigger)

Vejita · « **Reply #216 on:** May 24, 2006, 05:15:00 PM »

QUOTE(Vejita @ May 24 2006, 10:02 AM)

I believe I may have the solution to your CTRL + 3/4 problems!

Have you enabled the DEBUG KEYS in mugen.cfg?

;Set to 1 to allow debug keys at all times. Otherwise debug keys
;allowed only in debug mode.
AllowDebugKeys = 1

IT WORKS HAHAHAHA!

I now have WORKING tagging and WATCH mode is like VS CPU mode!

The launch files are modifed from guybirds xmugen 4.5 release and the modified controls are for joy2key1 currently. Left Trigger is CTRL and the Right Trigger is either 1 or 3. Replace your current launch file and makesure you are using xmugen 4.5. Also makesure the AllowDebugKeys setting in your mugen.cfg is set to 1.

Here are the files:

http://www.megaupload.com/?d=6PBB9I78

Here is what each one is for:

launch-ctrl-1 - Use this to make WATCH MODE act like a VS CPU mode. Basically WATCH MODE is CPU VS CPU but when your character is doing the intro before the match, press both triggers down once and you control player 1 essentially meaning you can choose your opponent and fight on any stage you like against the CPU

launch-ctrl-3 - Use this for player 1 to assume control of tag player during the intro by pressing both triggers after patching your character with the Tag Team Workshop patcher.

The only thing left now is assigning multiple keys to one button in joy2key.

Have fun.

Ken34 · « **Reply #217 on:** May 24, 2006, 05:57:00 PM »

Alg, there seems to be a problem with trying to use my X-arcade duel players board in mugen, i got all the new files and the bzimage with my added arcade stick to it that u created, but for some reason, it wont do F1 even if we map it to a button like L.

does this error have anything to do with it?

unable toget hub descriptor (err=-32)
hub configuration failed for device #2
USB device 2(vend/prod 0x4b4/0x8bb0) is not claimed by any active driver

unable to get device descriptor (error=-32)
unable to get device descriptor (error=-32)
unable to get device descriptor (error=-32)
unable to get device descriptor (error=-32)
unable to get device descriptor (error=-32)
config descriptor too short (expected 32, got 16)
unable to get device 9 configuration (error=-22)
unable to get device descriptor (error=-32)

Arcade 2 players - 2 found(just posting this part to show that it atleast recognizes my duel players arcade board)

guybird · « **Reply #218 on:** May 24, 2006, 07:11:00 PM »

I did figure out the Tag controlling too, and the issue was NOT my joy2key setup but you have to enable debug controls in your mugen.cfg. I'm posting the setups on Xmugen Spot if anyone wants to see the code used and to apply it to their setup. For the most part, I'm going with 2 setups:

For normal S controllers, L3 = control, A = 1 & B = 3. So L3 + A = take control in watch mode. L3 + B = enable tagging for player 1.
Arcade sticks, R trigger = control, B = 1, Black = 3.

Remember though, Alg's newest joy2key2 doesn't work with parameters like he thought it did. So the only way to get tagging working for player 2, is by mapping a button to player 1's pad.

This post has been edited by guybird: May 25 2006, 02:11 AM

jman2004 · « **Reply #219 on:** May 24, 2006, 07:29:00 PM »

Just to make sure I understand correctly:

1. In order to enable tagging, mugen must have its debugging controls enabled?
2. The controls you defined below are entered in the launch file?
3. Is this for XMUGEN 4.5?

Forgive me...I'm still new to editing things in xmugen.

Jaleel

QUOTE(guybird @ May 24 2006, 08:42 PM)

I did figure out the Tag controlling too, and the issue was NOT my joy2key setup but you have to enable debug controls in your mugen.cfg. I'm posting the setups on Xmugen Spot if anyone wants to see the code used and to apply it to their setup. For the most part, I'm going with 2 setups:

For normal S controllers, L3 = control, A = 1 & B = 3. So L3 + A = take control in watch mode. L3 + B = enable tagging for player 1.
Arcade sticks, R trigger = control, B = 1, Black = 3.

Remember though, Alg's newest joy2key2 doesn't work with parameters like he thought it did. So the only way to get tagging working for player 2, is by mapping a button to player 1's pad.

guybird · « **Reply #220 on:** May 24, 2006, 07:35:00 PM »

1. Yes debug controls must be enabled.
2. You can use vejita's setup which he posted (using L & R triggers) or ones I've created (Using R trigger for arcade or L3 for normal s controller).
3. 4.5 is just the name I gave the pack, as it contains all of the latest updates until now. It will work with Alg's latest joy2key file though.

alexlexus · « **Reply #221 on:** May 24, 2006, 08:13:00 PM »

QUOTE(guybird @ May 24 2006, 08:42 PM)

I did figure out the Tag controlling too, and the issue was NOT my joy2key setup but you have to enable debug controls in your mugen.cfg. I'm posting the setups on Xmugen Spot if anyone wants to see the code used and to apply it to their setup. For the most part, I'm going with 2 setups:

For normal S controllers, L3 = control, A = 1 & B = 3. So L3 + A = take control in watch mode. L3 + B = enable tagging for player 1.
Arcade sticks, R trigger = control, B = 1, Black = 3.

Remember though, Alg's newest joy2key2 doesn't work with parameters like he thought it did. So the only way to get tagging working for player 2, is by mapping a button to player 1's pad.

1. Yes debug controls must be enabled.
2. You can use vejita's setup which he posted (using L & R triggers) or ones I've created (Using R trigger for arcade or L3 for normal s controller).
3. 4.5 is just the name I gave the pack, as it contains all of the latest updates until now. It will work with Alg's latest joy2key file though.

with my help...........

must i nag some more? lol

This post has been edited by alexlexus: May 25 2006, 03:14 AM

alg5 · « **Reply #222 on:** May 26, 2006, 01:15:00 PM »

do you have another things connected to xbox (save cardtridge...) ?
because it seems there is something else: USB device 2(vend/prod 0x4b4/0x8bb0) is not claimed by any active driver
but it seems this device is not working properly...

QUOTE(Ken34 @ May 25 2006, 02:04 AM)

Alg, there seems to be a problem with trying to use my X-arcade duel players board in mugen, i got all the new files and the bzimage with my added arcade stick to it that u created, but for some reason, it wont do F1 even if we map it to a button like L.

does this error have anything to do with it?

unable toget hub descriptor (err=-32)
hub configuration failed for device #2
USB device 2(vend/prod 0x4b4/0x8bb0) is not claimed by any active driver

unable to get device descriptor (error=-32)
unable to get device descriptor (error=-32)
unable to get device descriptor (error=-32)
unable to get device descriptor (error=-32)
unable to get device descriptor (error=-32)
config descriptor too short (expected 32, got 16)
unable to get device 9 configuration (error=-22)
unable to get device descriptor (error=-32)

Arcade 2 players - 2 found(just posting this part to show that it atleast recognizes my duel players arcade board)

Ken34 · « **Reply #223 on:** May 26, 2006, 04:42:00 PM »

nope, nothing else connected, couldnt you just add that code to the bzimage to solve the problem?

alg5 · « **Reply #224 on:** May 27, 2006, 12:28:00 AM »

i've verified, and the id are in the my linux kernel sources.
indeed linux find only the 2nd player (Arcade 2 players - 2).
was it working before ?
it seems this hardware is not standard.
both usb & hub driver are giving this error: "unable to get device descriptor"
the way your stick answer is not standard or there is a bug in hub or usb driver in linux...

Author Topic: XMugen-linux Beta v0.4 (Read 2217 times)