Topic: The Official Xmugen FAQ Thread (Read 1894 times)

nheco · « **Reply #315 on:** October 17, 2008, 05:17:00 PM »

Hi ppl.

Well... read all 26 pages before post. I'm getting problems running XMugen MK Project 4.3 (uses r1sky xmugen F_drive)
Instaled at F/Games/xmugen/
This pack came ready for the xbox...

Here is the same problem:

Tried everything, and always getting this error.

My Box:
Xbox 1.6 softmod
2 controllers plugged
400G HDD (F and G partitions, both same size)
14G free at drive F

Need help! Thanks.

zipmaster · « **Reply #316 on:** October 17, 2008, 07:34:00 PM »

QUOTE(nheco @ Oct 18 2008, 12:53 AM)

Hi ppl.

Well... read all 26 pages before post. I'm getting problems running XMugen MK Project 4.3 (uses r1sky xmugen F_drive)
Instaled at F/Games/xmugen/
This pack came ready for the xbox...

Here is the same problem:

Tried everything, and always getting this error.

My Box:
Xbox 1.6 softmod
2 controllers plugged
400G HDD (F and G partitions, both same size)
14G free at drive F

Need help! Thanks.

looks like you have it in the wrong spot, try making sure all the directorys are capitalized right

nheco · « **Reply #317 on:** October 17, 2008, 08:57:00 PM »

QUOTE(zipmaster @ Oct 18 2008, 03:10 AM)

looks like you have it in the wrong spot, try making sure all the directorys are capitalized right

Just hex-edited the "irdloop" file, and found this:

CODE

swapon /mnt/Games/xmugen/swapfile/r1skyswap

Thats how my folders are... F/Games/xmugen/*.*

Thanks anyway

saig3n · « **Reply #318 on:** November 13, 2008, 02:05:00 PM »

Hi,

I get that message saying:

"USB device 3(vend/prod 0xe6f/0x8803) is not claimed by any active driver" on .The controller doesn't work on the game. I get the main menu but i'm unable to continue.

I have a pelican and gamestop xbox controller and no luck. Is there like an update that makes my controller work? or do i need the authentic MS controller?

I have mine installed on the F: drive with 250GB HD.

I have been unable to play xmugen because of this - any help would be appreciated.

Thanks

iceflow420 · « **Reply #319 on:** December 09, 2008, 07:44:00 PM »

Ok, this is starting to drive me nuts. I have been using the "Fighting Jam" version on my Xbox for about a year now. I like it but the character select screen is a mess. So I checked in on the boards over the weekend and saw that problem child uploaded his version of broken mugen, with a few other bonuses added in, to File Factory, so I figured I would go download it and give it a shot to see if it would be a good replacement. I was able to download part 1 ok on Saturday but then I tried to get part 2 and got a 12mb file. I tried again and got a 15Xmb file on Sunday, I just tried again and got a 212mb file (should be 267mb).

File Factory seems like such a P.O.S. - is there anyway to get a t0rr3nt (not sure if I can say this word here) of this file? This seems like a much better means of delivery than downloading 11 pieces of a file from a site that probably only works if you cough up $11 for a 1 month membership.

Thanks

drdystopia · « **Reply #320 on:** December 28, 2008, 02:48:00 AM »

I really hope Problem_Child is still watching this thread.

I installed his Brokenmugen and upload on E:\ after doing a replace all in the config file to change all the F:\ to E:\
and it worked.

I just upgraded my harddrive to a 250G drive and FTP'd the same set up over to F:\ with the original config file and it won't get past the booting screen.

I then tried changing it to E:\ again since I know it worked there and still it freezes.

I get a message that says Fatx error, file system has been set to read only

then it says it found my controller and does nothing.

I only installed 1 char just to make sure it works.

Any ideas what could be causing this?

I think it is my new drive but I don't know how to change the write properties on it and every other emu/homebrew works fine.

Any help would be great since I bought the bigger drive just so I could play mugen.

thanks

Daggerx · « **Reply #321 on:** January 17, 2009, 06:11:00 AM »

I downloaded problem child's 11 file archive from his filefactory. After the download was done I proceeded to extract and then its asks for a password - what is the password. This is probably my last attempt to try xmugen out and this looks promising - I just need the password. Thanks in advance.

Daggerx · « **Reply #322 on:** January 18, 2009, 10:31:00 PM »

need a working mugen.cfg for the mugen xtreme distribution, if anyone has one that does not give joykey errors - please post it. thanks in advance...

melek-taus · « **Reply #323 on:** February 15, 2009, 03:23:00 AM »

I have been trying to get xmugen running for a couple weeks now and still all i get are problems.

i have an xbox 1.4 softmodded evox xmbc as my main dash and 64 mb ram. The hd is the original one putting a 30 gb in it today.

Atm i am dloading the 11 part xmugen setup from filefactory it just takes so long only at the 4th part.

I have xmugen 4.9 r1sky setup for e drive tried it under the games folder emulators folder and on the normal e drive. My xbox finds a game called kind of fighters. I can launch it under xmbc but i get a black screen with some coloured dissortion at the top of the screen. When i use the unleash x dashboard i get an error screen saying something of no cd killing itempt or so.

Tried slimmugen also tried it in the same way as above but it hasnt worked. I got so far that i could choose the basic screenpak but when kungfuman starts to load i just get the error screen.

tried xmugen metromod v1 but havent got that to work either same problems as above.

I also tried to use these mugen setups with brokenmugen but notting worked.

I got 2 joypads connected more then 2 gb left on the e drive. For some reason my f drive cannot be used i think its not partitioned

Can anybody help me setup xmugen and give some kind of tutorial how to set this up. I read this whole post but notting seems to work. I softmodded my xbox easely same goes for adding xmbc as my dash but trying to get xmugen to run damn dudes i just dont get it as far as any readme i am doing it right and it should work.

pls help me.

And i hope the 11 part xmugen setup works but what was that with an pasword if it has one pls share.

Nextelhalo · « **Reply #324 on:** February 17, 2009, 06:55:00 PM »

I just got the 11 part mugen and it works just fine. You have to FTP it over to the F:Games folder or just use XBMC to transfer it.
After that, open the filemanager in your xbox and there will be a folder named "swap file". Open that folder and delete the text file inside it that says "deleteme".
After that boot it up. One of the screens takes a minute to load so be patient.

Anyone out there find a good link for Xmugen Sky Edition?
I use Xtreme Mugen but the Sky has an assload more characters.

eyedontnowhatimdoin · « **Reply #325 on:** February 19, 2009, 07:10:00 PM »

I dont get a "swapfile" folder and when i launch xmugen i get to the screen with the dude in the upper left hand corner then a bunch of text then i get the "kernel panic attempted to kill init" message then a freeze.
I've searched everywhere for a solution, there was someone having the same problem on this thread, but apperently they had to reformat and repartion the drives and that just not an option for me or at least not worth it. are there any other solutions?

obluso · « **Reply #326 on:** February 21, 2009, 11:59:00 PM »

QUOTE(Nextelhalo @ Feb 17 2009, 10:39 PM)

I just got the 11 part mugen and it works just fine. You have to FTP it over to the F:Games folder or just use XBMC to transfer it.
After that, open the filemanager in your xbox and there will be a folder named "swap file". Open that folder and delete the text file inside it that says "deleteme".
After that boot it up. One of the screens takes a minute to load so be patient.
Anyone out there find a good link for Xmugen Sky Edition?
I use Xtreme Mugen but the Sky has an assload more characters.

I am new to the evolution x dash, well the xbox for that matter, I am not finding a "swap file" either.
I found the file manager. I have found a swap under E and F, but they dont have <> around them so I assume it is not a folder. that's under dvd2xbox.

my problem says press F1 to continue. I have clicked in the sticks and pad like ps2 R3/L3 to no avail.

obluso · « **Reply #327 on:** February 22, 2009, 09:46:00 AM »

QUOTE(obluso @ Feb 22 2009, 02:35 AM)

I am new to the evolution x dash, well the xbox for that matter, I am not finding a "swap file" either.
I found the file manager. I have found a swap under E and F, but they dont have <> around them so I assume it is not a folder. that's under dvd2xbox.

my problem says press F1 to continue. I have clicked in the sticks and pad like ps2 R3/L3 to no avail.

well I got it to get past the F1 prompt. I put in a second controller in the #2 and it moved F1 screen and now I can play arcade but it is not recognizing my second controller for vs. stuck on that.

and when I play on the arcade mode if I touch the right stick it resets the battle. so that sucks for game play. gotta find the fix to that.

This post has been edited by obluso: Feb 22 2009, 05:48 PM

eyedontnowhatimdoin · « **Reply #328 on:** February 23, 2009, 12:06:00 AM »

This is so frustrating.....there doesnt seem to be any stable releases, i think im just going to give up. on to street figher 4

Nextelhalo · « **Reply #329 on:** February 25, 2009, 12:57:00 PM »

Dont give up bro, there is a stable build out there. I think it's Xmugen Final 2.0 maybe?
I've gotten that and BrokenMugen to work within the past few weeks. BrokenMugen is alittle
slow but the other runs like a champ.
Just remember, best to run off a 250gb or lower( or else you'll have to format in 32k) and i've seen
issues with some 1.6 boxes too, but only some.
Keep trying man, if i have to i'll seed the version i have for a while just so people can get it.

Author Topic: The Official Xmugen FAQ Thread (Read 1894 times)