Print

[Bochief]

I need help. I'm using xmugen 4.9 and It's stuck on thw Now Loading screen. What do I need to do?

[Reza1986]

QUOTE(Bochief @ Mar 27 2009, 05:58 AM)

I need help. I'm using xmugen 4.9 and It's stuck on thw Now Loading screen. What do I need to do?

Are you using the setup for the E drive or F drive? Do you have the XMugen Renamer?

[nio107]

QUOTE

same here i use the 4.88 mb one as well just tryed it with r1skys setup with the 4.88mb version and it works

WHAT?!

a 4.88!?

aahh..sorry... for a second I believe it was 4.88 gigas (mine is 3)... so I was like...crap why I didn't notice!!

xD

[Bochief]

I'm using F drive setup and yes I have the renamer

[Reza1986]

QUOTE(Bochief @ Apr 5 2009, 09:23 AM)

I'm using F drive setup and yes I have the renamer

Hmm...lets see now Did you setup your screenpack, characters and stages probably, meaning everything is leading to the right folders and its compatible?

[matosman]

Hello xbox scene community,

I am french and since two months i got back my xbox.
And i made a very nice mugen but i absolutely not understand which way to add more than 1 gb swap.

Sometimes, it is very long time to load characters and anything else, in team battle is very long to wait.

So i have 2 questions :
1 - Which ways to add more than 1 gb ?
2 -  Is it possible don't show information message (with F1) in beginning ?

Sorry for my poor english, and yes i search in this forum before ask question.
I didn't understand very well that's all.

[morbus]

Hi, I am unable to get past the 'F1' screen pressing analog sticks down do not work,  i am using a madcatz wireless controller.. would this controller cause any problem like this?

Thanks!

[nio107]

QUOTE(morbus @ May 14 2009, 04:53 PM)

Hi, I am unable to get past the 'F1' screen pressing analog sticks down do not work,  i am using a madcatz wireless controller.. would this controller cause any problem like this?

Thanks!

there's a few controllers that are not recognised, but I think madacatz should work (not sure, I can't remember right now)...

about the Swap File, I'm curious too, cause I have a 3 giga swapfile, but people told me it doesn't work, that the default 1gig load instead of the 3gigas swap...

(?)

there's a way to use the 3 gigas swap

www.spriters-academy.com.ar/

(search Xmugen and you will find that swap file there)

[chukydragon]

QUOTE(FourTwentySmiles @ Mar 12 2008, 09:09 PM)

OK.......I now have a working copy of Xmugen on my xbox. What I am now wondering is how to add characters.
If I understand correctly...I need to edit the select.def file.  Seeing as how my dev skillz are up to par with the likes of Napoleon Dynamite (and you know he gots skillz).......Im screwed.

Maybe not.......Once I understand what Im lookin at, Ill be ok.

I Hope.

ok pal is very easy to add character to the mugen jurmm (x-mugen of corse)
first you have to check the character with Fighter Factory if is complete then use xmugen renamer to change to xmugen(xmugen is CASE_sensitive so change it and PRESTO!!! character lyou like to une in xmugen


I got right know about 30GB of data of mugen...COOL no!

[xmod4u]

First off, sorry to bring back an old thread that will prolly make some peeps go "ah no, not again!" lol

I had this mugen 4.9 for F drive running like a charm for 2 years now.
The xbox in question is inside a PC case from an old mod, and I decided to make an arcade cab with a different xbox and COPY over the same folder to the SAME place in the other xbox.

Both same xbox 1.3
Both same chip smartxx v2
Both in the same place F:/emulators/xmugen

I literally copied from xbox to xbox to make sure I had the same setup.
It STILL boots on the first one, but the second I get this error.



I tried everything and have been reading for 2 days on this 30 page thread. I just dont get it.
It cant be the setup, it works on one xbox.


any input would be greatly appreciated.
thanks
xmod

[Pulsemasta]

QUOTE(xmod4u @ May 1 2010, 04:22 AM)

First off, sorry to bring back an old thread that will prolly make some peeps go "ah no, not again!" lol

I had this mugen 4.9 for F drive running like a charm for 2 years now.
The xbox in question is inside a PC case from an old mod, and I decided to make an arcade cab with a different xbox and COPY over the same folder to the SAME place in the other xbox.

Both same xbox 1.3
Both same chip smartxx v2
Both in the same place F:/emulators/xmugen

I literally copied from xbox to xbox to make sure I had the same setup.
It STILL boots on the first one, but the second I get this error.



I tried everything and have been reading for 2 days on this 30 page thread. I just dont get it.
It cant be the setup, it works on one xbox.
any input would be greatly appreciated.
thanks
xmod

Did you make sure the Linux Config file is in the root of the drive and that it looks correct?

also, are you using a controller other than a official Xbox controller? That could cause an error too.

I got that error before from these issues.

[Pulsemasta]

QUOTE(xmod4u @ May 1 2010, 05:11 AM)

using official S controller.

What is the linux config file called?

mugen.cfg
mugenboot.cfg

I dont see and actual file called linuxconfig, the xbox that mugen works on does not have that either.
I read about having the bzimage and irdloop.gz in the root of E, tried and still same error.
What baffles me it that both xbox's have exactly the same setup and file configuration and paths, boots on one but not the other.

forgot to add, ONLY dif between both boxes is the HDD. one that works has a 320GB and the other has a 160GB. both partitioned with 137+ for F tho.
Man! i thought this would of been a simple transfer and play.

thanks again all

Yeah the Mugen.cfg or whichever would be the one... its a linux config but renamed so you can have linux and mugen with no issues. You have the Mugen cfg right in the root of F right?

If so, I'm not sure what your problem is then  

I know Mugen can be picky with larger drives, but your saying the smaller drive is the one with issues?


I would get a fresh MUGEN, delete all saves and whatnot from the Mugen you are trying to load now, put the new one on and try again.

[joeblow420]

hello folks.. looks like there hasnt been any activity here for a long time.. heres the deal..

[joeblow420]

hey not sure if anyone is familar with this place.. http://snesorama.us/...t=42113&page=15
 but i seen some interesting info there, such as this:

QUOTE

Originally Posted by nextelhalo  View Post
Long Shark- You have to put Xmugen in F:. The kicker is that F: needs to be under 256GB or you have to format it with 32k clusters, Xmugen does not like that. SO....what you need to do is get a program called XBpartitioner and use it to format you drive. Just give F: 137gb or lower and the rest goes on G: which you'll have to format with 32k clusters. This program is very easy to use.

so i replied with this..:

QUOTE

I got a 1.0 xbox, used to be softmodded, but i dont have a pc, and wanted to put in a 2tb hdd.. so i hard modded, and flashed the tsop with ind bios 5003.67.. before that it was softmodded with a 320 gig hdd, and had an older screen pack edition of xmugen using unleashx as the launching platform. it always worked fine, so i just been copying everything from my old xbox to my notebook, and then back to the new 2TB hdd.. when looking for some useful info about how to get the most out of the 2TB hdd with out any data corruption issues, i was told to do this:
1. launch xbpartitioner 1.0
2. Split the F & G drives 60/40 (uneven split)
3. format both F&G in 32k clusters temporarily
4. Reboot xbox
5. launch xbpartitioner 1.1
6. Split the F & G partitions 50/50
7. Now format in 64k clusters

which i did, all is fine with the hdd, but now my xmugen will not work.. i get some error about fatx raw_scan_root or something like that sector 0 is not available file system set to read only.. very odd.. anyway that is the only error i get from it..
i also have the win98 xdsl edition, which i added a command to either launch windows 98 or mugen, it always worked before, but as i said above now i cant seem to get it running at all. i made sure all files were copied over, and dumped everything back into the drives they worked on in the other hdd.. i always held up xmugen as the crown jewel piece for what is possible on the xbox, and so bummed out its not working on this new hdd.. i mean i could always just swap out the hdds when i want to play, but its not really what my goal was when i went into getting the 2Tb hdd.. know what i mean..? so any and all info is very much appreciated !

btw again i did as suggested in xbox scene forums under the tut for the custom hdds of this size.. so will the 64 clusters be a problem, or can i just fill up F drive to the brim say till there is only 100-200 gigs free on it, will that be enough.. i dont think i can just make F drive 127 gigs and the rest on G, heard there was some issue with fatx system reading any partition over 1000 gigs or something... thanks again, and if ur still interested in any info about the screen packs let me know, i got the MK vs SF and MK project, and many others. got them from a private site, and all configs to get them to run under the custom unleashx launcher either stand alone packs, or as eve or slim eve packs.. again this was all working fine with my krayzie ndure mech ass softmod, then i went to a hardmod, where everything still worked very very well..

so can anyone shine some light on this for me pleaseee???

[Spadra]

Hello all,

   I've recently gotten into XMUGEN about 3 weeks ago and have been busily researching the different ones and have been reading info from Guybird to Idiotfan and so on. I've noticed that the XMUGEN projects don't seem to be fail safe and needs to be evaluated on an individual basis. I'm hoping all you good folks here can give me a hand and I can count myself among the success stories of XMUGEN.

Here is my situation:

    I have attempted to use Xmugen Battle Coliseum. Which I obtained at: here

    I also tried Xtreme Xmugen 2.0 Final by xRaVeNx(obtained from Demonoid)  

    Both of these version are described as "drag and drop", more precisely drag and drop the xmugen folder into the directory F:Games/. Upon doing that for both (I've also spent hours adjusting and trying different caps lock combinations like 'F:/Games/XMUGEN' and so on and so forth after reading different blog posts) I received the same issue. Upon loading the black screen freezes and what is suppose to be the white text with the picture of the guy above it is a blur of a scrambled white banner at the top.

   I then went and tried the SlimXMugen project which makes use of an Emulator folder as opposed to the Games folder. Slightly more success. I open it through XBMC and it loads UnleashX and gives me the option to load a screen pack. This mini victory is short lived, the only option is basic and it crashes upon clicking it. I originally had a copy of Broken Mugen that did the same thing. Difference being the Broken would load a whole menu with a background, the Slim did not.

About my system you ask? Its the always beloved 1.6 xbox, with UnleashX, the XBMC, and EvolutionX. I have upgraded my hard drive with a 500 GB White Disc and have used XBpartitioner and have the F: at 120.55GB (in the partitioner F is the partition listed as '6' in the extended partitions, right?) and the G: at 337.76GB.

   I'm assuming my only hope is with Broken and the Slim but I know I need guidance to get either up and running. Really keeping my fingers crossed someone out there sees this and has some pointers.

- Spad