Print

[fujitech]

SPICE installation manual

Alternate 5v for Universal S.P adapter Install Guide

Make sure you have read these manuals before posting and asking for any help!

ALSO:

Make sure the pcb sits flat on the adapter and the alignment washer sits inside the groove.
seen pic 2

Have in mind that the hooks must be fitted inside the vias not on the edge
see pic 5 and 6

Make sure u have correct alignment of the adapter
see pic 7

This post has been edited by appleguru: May 12 2005, 01:56 AM <

[zonetripper]

Just installed an SP Ice on a 1.6 w/ the adapter. Very easy and straightforward. So, my question is: is there a manual for any other versions? like 1.5, 1.4?

or is it the same?
 

I only find the 1.6 manual for the SP Ice w/ adapter


Thanks in advance. <

[SeaWolf69]

Ok,

 I'm pretty sure I have a version 1.6b & I installed the sp adaptor, all the red leds came on, double checked the hooks were in the right place by refering to the install manual. My package didn't come with the place template? I turn off & put the chip on, the led that is supposed to turn off goes off, the mod chips red led is lit up, but it turns on & off a couple of times & frags? I take the chip off & my xbox boots up normally? Any help would be greatly appreciated. Thanks...

This post has been edited by SeaWolf69: Apr 13 2005, 07:15 AM <

[Rabid1]

QUOTE(zonetripper @ Apr 12 2005, 06:34 PM)

Just installed an SP Ice on a 1.6 w/ the adapter. Very easy and straightforward. So, my question is: is there a manual for any other versions? like 1.5, 1.4?

or is it the same?
 

I only find the 1.6 manual for the SP Ice w/ adapter
Thanks in advance.

I did a small tut on TeamXodus in the Installation forum. But basically it is the same as for the standard solderless. You use the black bottom half of the S.P. and the Xenium chip. The LED half isn't used. <

[ebaydealz4u]

QUOTE(Rabid1 @ Apr 20 2005, 04:22 AM)

I did a small tut on TeamXodus in the Installation forum. But basically it is the same as for the standard solderless. You use the black bottom half of the S.P. and the Xenium chip. The LED half isn't used.

so do you mean that the white peace with the 4 LED's  that stick out your not suppost to use that on versions older than 1.6? <

[appleguru]

QUOTE(ebaydealz4u @ May 1 2005, 01:46 PM)

so do you mean that the white peace with the 4 LED's  that stick out your not suppost to use that on versions older than 1.6?

That's exactly what he means <

[ebaydealz4u]

QUOTE(appleguru @ May 1 2005, 09:17 PM)

That's exactly what he means

Ok thanks....a couple more questions....
1) Is Extream Mods a safe site to buy from???  
2) Since the older version xbox's do not require the white LED peace, is there a cheaper package that doesn't come with it???

thanks for all your help, if you have any advice you wouldn't mind giveing me...please email me... [email protected]
 <

[appleguru]

QUOTE(ebaydealz4u @ May 3 2005, 07:06 PM)

Ok thanks....a couple more questions....
1) Is Extream Mods a safe site to buy from??? 
2) Since the older version xbox's do not require the white LED peace, is there a cheaper package that doesn't come with it???

thanks for all your help, if you have any advice you wouldn't mind giveing me...please email me... [email protected]

1) check out the official reseller list for safe places to buy: http://www.teamxodus.com/modules.php?name=...=viewlink&cid=1

2) yes, you can buy the older "USA" solderless kit from resellers that still have stock.. Have a look around.

Also, locking this topic as support questions really don't belong here. <