xboxscene.org forums

Pages: 1 ... 3 4 [5] 6 7 8

Author Topic: Winuaex V2  (Read 1109 times)

XPort

  • Archived User
  • Hero Member
  • *
  • Posts: 941
Winuaex V2
« Reply #60 on: June 22, 2004, 12:19:00 PM »
XDelusion - I just established a few posts back that the missing drawer/file error happens in WinUAEX in the same way it happens in WinUAE.  I also explained what you could do to bypass the problem.  Either you are not using WinUAE 0.8.27 on your PC or you are using different settings in WinUAE than you are on WinUAEX.  It's as simple as that.  

The same applies to Worms DC, Citadel, and every other game/software you have complained about thusfar.  

BTW - Fast Copper is enabled by default in WinUAE and WinUAEX.  You have it turned off in your Workbench configuration.  It makes no difference for WB installation, but I think it may indicate that you are not actually using the same settings between WinUAE and WinUAEX.

Logged

XDelusion

  • Archived User
  • Hero Member
  • *
  • Posts: 970
Winuaex V2
« Reply #61 on: June 22, 2004, 07:58:00 PM »
I've tried it with Fast Copper on as well, tried all sorts of crap, and as for the PC version, I'm using the latest what ever that is. Regardless I've never had this problem on any PC version that I've used, and I format a lot (gawd bless winblows), so I've tried many versions. As for Worms DC, I've used the same exact config you posted man, and still no go, I'm not sure how to explain that.


ScHlAuChi: No I've got it installed, did it by hand, I do know my way around Amiga, I just needed you to do my config the other day because I could never seem to set UAE up quite right to get those handful of gems to play. Thankx anyhow!

Oh yes and Xport, that one problem I had where I said the screen was getting fuzzy when I entered WB's pull down menu...

...I had forgot to turn your GFX filter short cuts off, and I was triggering them and not noticing, so that one was my fault.
Logged

XPort

  • Archived User
  • Hero Member
  • *
  • Posts: 941
Winuaex V2
« Reply #62 on: June 23, 2004, 03:04:00 AM »
QUOTE
I'm using the latest what ever that is


You're basically saying you don't know 100% what version you are running.  It's possible 0.8.27 was released after the last time you downloaded WinUAE.  Look at the "About" section.  

I have not seen a single game or program behave any differently (other than speed-wise) in WinUAEX than in WinUAE with the same exact settings.  If there was even one other person who was having the same issues as you, I would be more inclined to think differently.  However, since you are still the only one and every program you have noted has worked fine for me (and some were even verified as working by Likklebaer), I have to conclude that you are actually using different settings between WinUAE and WinUAEX (or you are using a version of WinUAE prior to 0.8.27).  

Logged

XPort

  • Archived User
  • Hero Member
  • *
  • Posts: 941
Winuaex V2
« Reply #63 on: June 23, 2004, 03:45:00 AM »
kimota2004 - re-read the v1 and v2 threads.

Logged

gonkle

  • Archived User
  • Full Member
  • *
  • Posts: 179
Winuaex V2
« Reply #64 on: June 23, 2004, 04:30:00 AM »
you need to start those games from an installed workbench.
CD32 suppport will "maybe supported", thats the words from xport.
I hope for it, couldnt be that hard, only need the extended rom i think.
Logged

MrX_Cuci

  • Archived User
  • Newbie
  • *
  • Posts: 22
Winuaex V2
« Reply #65 on: June 23, 2004, 05:02:00 AM »
QUOTE (gonkle @ Jun 23 2004, 01:30 PM)
you need to start those games from an installed workbench.

I read this on the internet about HDF: Hardfiles are images of entire hard disks. Like disk images, computer emulators use them in the same way a real computer would use a real hard disk. Most emulators that use hardfiles can create them for you, but they'll usually be blank! They're ideal for installing an operating system on.

So if I just insert that HDF file ,which is basically a cloned harddisk, it should work right? Or should I have another HDF with an installed Workbench? I am a bit confused about this.
Logged

am1ga

  • Archived User
  • Newbie
  • *
  • Posts: 8
Winuaex V2
« Reply #66 on: June 23, 2004, 05:07:00 AM »
smile.gif So I think that extended ROM 'slot' in inUAEX is -=extremely=- important, especially for CDTV fetishists wink.gif Also floppy sound emulation (preferably with volume control).

And maybe screen positioning/resizing 'shortcut' under thumbsticks would be useful.

Let me tell it again - thanks, Xport. This emu is already a great piece of emu smile.gif)
Logged

XPort

  • Archived User
  • Hero Member
  • *
  • Posts: 941
Winuaex V2
« Reply #67 on: June 23, 2004, 05:30:00 AM »
mrx_cuci - Some HDF files contain a bootable filesystem and others do not.  It sounds like you have some that do not, so you can grab a Workbench boot disk image and pop it into the floppy drive #1.  Workbench will boot, recognize the hard drive, then you can open the hard drive drawer and select the (usually easily identifiable) program to run the game.  

kimota - the flicker filter will be off by default everywhere.  I wasn't planning on adding an option to re-enable it, but may do so.

am1ga - WinUAE does appear to have akiko support (there is an akiko.c file)  Real CD32 support certainly seems doable in WinUAEX - I've done similar things with NeoGenesis (reads real Sega CDs) and HuGoX (reads real CD/SCDs).  Patience, grasshoppers.

Logged

gonkle

  • Archived User
  • Full Member
  • *
  • Posts: 179
Winuaex V2
« Reply #68 on: June 23, 2004, 05:55:00 AM »
but has the iso mount support to be coded in the emucore or can it be done by an plugin, like xbmc and other emus have also iso/bin support, think wouldnt be that hard to support this, or just support for real cd32 cds.
Logged

XDelusion

  • Archived User
  • Hero Member
  • *
  • Posts: 970
Winuaex V2
« Reply #69 on: June 23, 2004, 11:57:00 AM »
smile.gif

Are you guys actually playing the game, or are you loading it, seing that it starts to load, and call it quits? Because with WormsDC you have to let it load, then it gets to the screen where you have to hit the right Mouse button to load some more, then after about 30 seconds or so of loading time, it crashes, never to bring you to the menu screen.

LickMe: so you've played this on your XBOX along with Citadel? That's the only games I've mentioned that absolutly will not work for me.


As for WorkBench, using the SAME settings as you suggested for WormsDC, I tried to install it again on my PC, with no problems, but I did notice something strange.

Usually on UAE or a Real Amiga, when it asks for your Extras disk and you put it in, the button always fades out and the install continues automatically, but with this release of UAE you are forced to hit proceed manually for some reason after putting in the disk. That I don't understand, but I think there could be a link because it stops at 30% and jumps to 45% when it asks for the Extras disk....


worth looking into.
Logged

XDelusion

  • Archived User
  • Hero Member
  • *
  • Posts: 970
Winuaex V2
« Reply #70 on: June 23, 2004, 12:38:00 PM »
Is there a USB Cat Weasal? In any regards that would be to slow anyhow.
Logged

deathx88

  • Archived User
  • Hero Member
  • *
  • Posts: 973
Winuaex V2
« Reply #71 on: June 23, 2004, 12:47:00 PM »
QUOTE (alexh @ Jun 23 2004, 09:21 PM)
Xport, at least no-one has asked for USB Floppy Drive support then they can load their original game disks wink.gif

 laugh.gif

if anyone asked that then *slap*
Logged

XDelusion

  • Archived User
  • Hero Member
  • *
  • Posts: 970
Winuaex V2
« Reply #72 on: June 23, 2004, 12:58:00 PM »
I'm not a Cat Weasal owner and I'm not sure if UAE even supports it if there is a USB version of it, but if it does, then it would be an interesting addition, though not a priority in my book. I would not use it to load my old game floppys, but I would use it to create ADF images for use with UAE which for those who demand legality, would help out a lot.
Logged

JAZ

  • Archived User
  • Newbie
  • *
  • Posts: 12
Winuaex V2
« Reply #73 on: June 23, 2004, 05:58:00 PM »
I'm surprised Xport hasn't decided to quit this scene altogether.

After
months of pleading he releases everyone's favourite Amiga emu on the Xbox. How is he repaid? A constant stream of complaining, griping and moaning.

This emu is awesome.

OK, so maybe there are issues with installing / running workbench - who gives a f*#k.  If you want to do that buy an Amiga.

"It doesn't run game "X" exactly as I remember it". Well go cry to your Momma. No-one cares. Get a life you complaining, ungrateful bastards.

Thanks again Xport, I love this emu!
Logged

XDelusion

  • Archived User
  • Hero Member
  • *
  • Posts: 970
Winuaex V2
« Reply #74 on: June 23, 2004, 08:13:00 PM »
wink.gif

Other than that, I'm just beta testing I guess, and being a smart ass while doing it. In the end I am very greatful for what work Lion, Xport and that dude who started UAEx in the first place, has done.

As for Xport quitting the sceen, well he did say he does this for his kids, so I guess he has a sort of passion and reason for it, though I do suppose he could just not release anything, but what fun is there in that?
Logged
Pages: 1 ... 3 4 [5] 6 7 8
« previous next »