Topic: Msbios Dead After Xeniumos 2.0.1 Update (Read 240 times)

appleguru · « **Reply #15 on:** October 10, 2004, 08:18:00 AM »

/me doesn't get it.... His update worked fine; and it has worked fine for many here... Hrm..

Gumba · « **Reply #16 on:** October 10, 2004, 09:47:00 AM »

Is it the MS dash or the bios which is dead?

The dash I can believe, the bios is write-protected normally.

If its the bios, then you should be able to load a bios to the xenium and everything will work fine. If its the dash, then that won't fix it (but it could be other things)

appleguru · « **Reply #17 on:** October 10, 2004, 11:12:00 AM »

It's the BIOS. And loading of the chip works fine. Its just loading off of the TSOP that doesn't work apparently (though it does for me).

Killa420 · « **Reply #18 on:** October 12, 2004, 08:23:00 AM »

What happens if you put if back to 2.0.0?

jROC99 · « **Reply #19 on:** October 18, 2004, 06:11:00 PM »

For V1.6 boxes use the MS_5838 bios (256k)

For anything else..try the MS_5101 (256k)

jROC

nolimit · « **Reply #20 on:** October 18, 2004, 06:16:00 PM »

yay, 5101 works.... didn't work before, but it works now o.O

Author Topic: Msbios Dead After Xeniumos 2.0.1 Update (Read 240 times)