Print

[neil222]

What do I do if my crc32 numbers are different than what is mentioned here?
The crc 32 i have on my Kinst2.chd is ed9c1617.
When converted with Roll's app, the crc32 i get off my coverted ki2.img
is also different.
So still can't get my KI2 working in KI-XXX...
Any help would be great.

[neil222]

Can anyone PLEASE help with this.... it's driving me crazy, especially
now that KI-XXX v1 is out....
 

[VampX]

hmm looks like this one isnt in the pinned thread yet?

[neil222]

To get mine working I had to get another download of "ki2_HDD.zip"
and get the correct rom set, one of my roms was not the right number:

ki2-l11.u98 (whereas I had  ki2-l14.u98).
After this it was good to go.....

 
     

[amps]

I would like to bring this thread out from the dead, and need some help!

First of all can the graphics on this thread be reinstated somehow?  I'm sure wherever they were originally posted from don't exist anymore.  Now moving on....

I was able to get kinst 1 working correctly even with out the graphics posted on this thread.

My CRC32 on kinst2.chd is exactly the same f43ff1ec, however when I edit the file in I don't receive the same CRC32 as posted by xboxgeek.  Any ideas?

[amps]

Well the damndestthing after 3 hours of trying and hex workshop telling me I don't have enough space and me not doing anything different, I suddenly get the same CRC32 on kinst2 file.  I have verfied it is now working correctly.

Leave it to me to ask for help and suddenly it just starts working correctly.

[XBoxgeek]

Killer Instinct 2

Start Hex Workshop and open Ki2.img. It should look like this:-



Click Edit > Insert; select Dec & type in 13 (see image below):-



After that it should look like this:-



You will now need to overwrite the first 13 bytes with:-
4147 2038 3133 2031 3620 3633 0A
Like this:-



After that click File > Save
This may take awhile (like 10 minutes!!)
If you want you can load this new file in to HashCalc to check the new crc; it should be:-
25bcdb8e
If it's not then you have made a mistake above.

Now with this file we need to take an extra step. Basicaly we need to trim 38087168 bytes from the end of the file.

Start Hex Workshop and open Ki2.img again. Click Edit > Goto:-
Select Dec & From Beginning of file
Type in :-419586061 (see below image)



Click go and you should end up here:-
Note:- Depending on how big you have Hex Workshop window open your view may be different. That does not matter as long as the offset is the same.



Press Shift+End to highlight all the data from this point to the end of the file:-




Click Edit > Delete to remove the highlighted data:-



After that click File > Save
This may take awhile (like 10 minutes!!)
If you want you can load this new file in to HashCalc to check the new crc; it should be:-
cc2632b8
If it's not then you have made a mistake above.

If it is:-
Open explorer and double click KI2 v2.1 HD Patch.exe
Uncheck make backup
Click start

After the file is patched check the crc again and it should be:-
11a9fc01



If all of the above went okay; you now have a good Ki2.img file. Pat yourself on the back you are done.

You can use RomCenter & the u64emu v3.04 dat file to validate your roms and img file. If you do it should look like this:-



Okay that's it. I hope this was okay and helped some of you (it was my first tutorial)

Let me know if you have any questions (except where to get the CHD files)

Cheers
XBoxGeek

[bill99]

Great Guide, thanks xboxgeek, but I think Roll has the right idea here...

QUOTE

Here's an easy way to convert a CHD back into an IMG. http://bbs.romshare....s=&postid=50088 Unfortunately you need to be a member of those forums to get that attachment, but I've got nowhere to upload it. Perhaps someone else can get it and put it in a more convenient place. In the zip are two batch files (and everything they need to run aside from the CHDs) that will turn a kinst.chd or kinst2.chd file into a working U64Emu IMG file. I did it with a set of MAME CHDs, and both work in U64 now.

[XBoxgeek]

This is true, but I thought I would do a tutorial anyway as people have been asking how to do it (even after Roll posted his link   which is currently down  )

If it can help someone get KI1 & KI2 running then great, if not, I enjoyed doing my first tutorial  

Cheers

XBoxgeek

[mannythug]

just go to google and find an image it's very simple

[MichaelNet]

[Knighty]

thx for this tut, it worked nice