Topic: Pcsxbox V4 - Samba/netbios Server (Read 526 times)

XPort · « **Reply #30 on:** July 07, 2003, 06:46:00 PM »

Also, try this format:

smb://user:pass@host:ip/share

XPort · « **Reply #31 on:** July 07, 2003, 07:08:00 PM »

host is your computer name. It's what you should have been putting after the @ sign.

(The format suggested in the INI file is smb://user:pass@host/share )

phobs · « **Reply #32 on:** July 07, 2003, 11:15:00 PM »

.

Xport, perhaps an option to cache isos launched from SMB share to x,y,z ?

XPort · « **Reply #33 on:** July 08, 2003, 03:28:00 AM »

phobs - so SMB works for you in PCSXBox with

smb://user:pass@host:ip/share

?

If so, then I suggest everyone else who is having problems to try that format also.

Cacheing effectively would mean copying the entire image to the X drive - in which case you might as well just upload the file to the XBox yourself. You can upload to the X drive and then start PCSXbox and you will still see it on the X drive - it won't be deleted.

pelago · « **Reply #34 on:** July 08, 2003, 04:05:00 AM »

QUOTE (XPort @ Jul 8 2003, 12:28 PM)

You can upload to the X drive and then start PCSXbox and you will still see it on the X drive - it won't be deleted.

Watch out if you run other programs though, such as commercial Xbox games, as they will wipe the X, Y, Z partitions.

the_casanova · « **Reply #35 on:** July 08, 2003, 06:55:00 AM »

i have tested 3 ways i use dhcp

smb://xbox:psx@home/jaguar/psx
smb://xbox:psx@jaguar:213.89.64.14/psx
smb://xbox:psx@home/jaguar:213.89.64.14/psx

could it be i need to have a 192.168.0.3 ip adress on my pc ??

anyway great looking emu xport ;-)

zeem · « **Reply #36 on:** July 09, 2003, 12:27:00 AM »

I have the same problem with v4.
Through XBMP i can find the dir but not with pcx.

As far as i know there is a problem with the emu and smb.

Hope there will be a solution soon.

igotgame · « **Reply #37 on:** July 09, 2003, 04:14:00 AM »

it works fine for me...I just had to click SMB 3 times when I did it

pelago · « **Reply #38 on:** July 09, 2003, 01:14:00 PM »

QUOTE (Col.Havoc @ Jul 9 2003, 10:05 PM)

Now, one question Xport, I am sharing my PC Cd rom drive, it can read PSx cd's, how do I get them to play and read through the network onto my xbox.

I believe he kinda answered that in a response to a similar question from Roam. If there was PC software that could present a real CD as a CD image on the fly, then potentially you could share that 'virtual' image over SMB. I don't know if such software exists, though.

D-Back · « **Reply #39 on:** July 09, 2003, 05:33:00 PM »

(for us dummies who cant figure out this smb stuff)

Anyway, still a great piece of software. Great job Xport!

EvilWays · « **Reply #40 on:** July 09, 2003, 07:58:00 PM »

QUOTE (the_casanova @ Jul 8 2003, 08:55 PM)

my xbox adress is 213.198.00.00
my pc is 213.198.00.01
i will test some more..

I'd change the IP of the Xbox if I were you. any IP address that ends *.*.*.0 is the IP address of the network/subnet. Change it to 213.198.0.2 and see if that helps

zeem · « **Reply #41 on:** July 10, 2003, 03:12:00 AM »

Finally ive got it to work!
How I did
1. wrote this in the pscx.ini file:
smbshare=SMB://xbox:xbox@hemma/zeem/playstation
2. uploaded the new .ini file
3. Started the emu
went to the menu option "configuration" and then "force reload D: *.ini settings"
4. After a few times the emu finally show the *.bin files.

this is probably the same thing that the .nfo file says you should do

and finally
Nice work Xport

GoDKiLLaX · « **Reply #42 on:** July 10, 2003, 05:31:00 AM »

SMB works with the same format as XBMP you just gotta go the the SMB: drive twice.

Author Topic: Pcsxbox V4 - Samba/netbios Server (Read 526 times)