Print

[nirvanafan]

Hi, I got the XDK and it's on my hard drive working, now that you know that here's the problem. I can get the XDK stuff to work in Gueux debug bios. The problem I'm having is that in the IND Bios config app, every time I try to change the .cfg to not disable debug it automatically rechecks the box. This makes it so that I cannot make the bios load the XDK files, If anyone has a fix for this please help. And also, the reason I dont just stick with Gueux is because I want to get halo 2 screenshots and pople say that it only works with IND-Bios. Thanks in advance.

[nirvanafan]

How do I go about doing that? Do I use a tool of some sort? Do I hex edit? PLease be more specific.

[nirvanafan]

It is??? Are you sure your not talking about the New X2 bios with the ini file?

[nirvanafan]

I tried opening it up in notepad and you can actually edit some things about the bios, but there is no line of text that says anything about the Debug Monitor. Any other suggestions?

[nirvanafan]

I know that but there is no part that says ANYTHING about the debug monitor, I opened it up as a text file in notepad but NOTHING, it has no place where it says anything about configuring the debug settings, it doesn't even say "Debug" or "XDK" or any remotly related term.

[heinrich]

CODE

DISABLEDM=1   ;disable debug monitor       Default=1

[nirvanafan]

This is all I see when I open up the .cfg in notepad

CODE

IGRMODE=2
IGRLOADSDASH=1
AVCHECK=1
IFILTER=1
FANSPEED=10
LEDPattern=GGGG
AUTOLOADDVD=0
BLOBTHROB=1
INTRO=1
SHOWFLUB=1
FOGON=1
XLOGOSCALE=100
TEXTSCALE=100
SKEWEN=1
YSKEWLOGO=-20
XSKEWLOGO=0
YSKEWXLOGO=0
XSKEWXLOGO=0
YSKEWTEXT=0
XSKEWTEXT=0
TMS=1
IND3D=1
SHOWXEN=1
SHOWMSEN=1
DEFAULTXBE=\Device\CDrom0\default.xbe
DASH1=\Device\Harddisk0\Partition2\evoxdash.xbe
DASH2=\Device\Harddisk0\Partition2\nexgen.xbe
DASH3=\Device\Harddisk0\Partition2\avalaunch.xbe

[heinrich]

you need to open the file that comes with the release.

[nirvanafan]

What file? The only files in the release are the .cfg, the .nfo and the bios' themselves and I've already read the .nfo, no help there, and that info I just posted is from the .cfg that is from the IND-Bios 5003 release found on xbins.

[nirvanafan]

Ok, thank you, I finally got it to show all of the config options, tell me if these look right

CODE

480P=0  ;         Default=0
AUTOLOADDVD=1      ;Autoload DVD (if dvd is in tray)       Default=1  
AVCHECK=1      ;Check for AV Pack       Default=1
BGCOLOR=0xFFFFFF ;X Screen BG Color       Default=0xFFFFFF
BLOBCOLOR=0x40ff27;Blob Color      Default=0x40ff27
BLOBRADI=23   ;radi of the blob       Default=23
BLOBSDEAD=0  ;removes blob (1 = remove)    Default=0
BLOBTHROB=1   ;         Default=1
CAMERAVIEW=-1  ;camera view  -1 to 15 accepted, -1 = random camera  Default=-1
DISABLEDM=0   ;enable debug monitor       Default=1
FANSPEED=10   ;Fan Speed   10-50 = 20-100%    Default=10
FASTANI=0   ;Fast Animation      Default=0
   
FOGON=1  ;Enable Fog      Default=1
FOG1ABS=0  ;absolute color, overides FOG1 color     Default=0
FOG1COLOR=0   ;0xAARRGGBB Fog 1 Color       
FOG1CUSTOM=0   ;Enabled Custom FOG 1 Color    Default=0
FOG2COLOR=0   ;0xAARRGGBB Fog 2 Color
FOG2CUSTOM=0   ;Enabled Custom FOG 2 Color    Default=0

GLOWCOLOR=0xa0ff40;Custom Glow Color      Default=0xa0ff40
IFILTER=1   ;Enable Interlace Filter    Default=1
IGRLOADSDASH=0   ;Load Dashboard on IGR       Default=0
IGRMODE=2   ;IGR Mode 0=off  1=compatible   2=quick      Default=2
IND3D=1  ;Ind-Bios Custom 'Xbox' Logo    Default=1
INTRO=1  ;Show Intro (0 = disables flub + 'x' screen)  Default=1
IOGLOWCOLOR=0xA0FF60 ;This is the intro/outro glow color     Default=0xA0FF60
LIPCOLOR=0x000100;         Default=0x000100
LIPGLOW=0x4b9b4b;         Default=0x4b9b4b
MACADDR=00:00:00:00:00:00;Change MAC Address    Default=00:00:00:00:00:00 (From eeprom)
MSLOGOTRANSEN=0   ;Enable Transperancy color for 'MS' logo       Default=0
MSLOGOTRANSCOLOR=0xff00ff;Transperancy color        Default=0xff00ff
NOFLUBBG=0   ;Disable Flub BG (Disable Scenery)     Default=0
NOLIGHTEN=0   ;Disable Light in Upper Right Corner of X Screen   Default=0
NOSOUND=0   ;Disable Sound      Default=0
RESETONEJECT=0   ;Reset on Eject      Default=0
   
SCENECOLOR1=0xFF35FF1A;0xAARRGGBB Scenery 1 Color    Default=0xFF35FF1A
SCENECOLOR2=0xFF35FF1A;0xAARRGGBB Scenery 2 Color    Default=0xFF35FF1A
SCENECOLOR3=0xFF35FF1A;0xAARRGGBB Scenery 3 Color    Default=0xFF35FF1A

SHOWFLUB=1  ;Show Flubber      Default=1
SHOWMSEN=1  ;Show 'MS' logo       Default=1
SHOWXEN=1  ;Show 'x'      Default=1
SLOWMOBLOB=0   ;Slow Down Blob      Default=0
SPIKEYBLOB=0   ;         Default=0
TMS=1  ;Show Trademarks       Default=1
USEUSEALLMEMORY=0;Use 128mb of Ram if Available    Default=0
USEXBX=0  ;Use Debug XBX file for Dash Load     Default=0
WIREFRAMEBLOB=0   ;Show blob in wireframe       Default=0

XBOXCOLOR=0x62ca13;Custom 'xbox' color       Default=0x62ca13
XGLOWCOLOR=0xCADE00;Custom Glow Color of 'X'    Default=0xCADE00
XINNERCOLOR=0x206a16;Custom Inner color of 'X'    Default=0x206a16
XLIGHTCOLOR=0xff000000;Color of the Light on upper right of 'x'  Default=0xff000000

SKEWEN=1   ;Enable change the position of the 'MS' logo   Default=1
YSKEWLOGO=-20   ;Y for above      Default=-20
xSKEWLOGO=0   ;X for above      Default=0

XSKEWXLOGO=0   ;X Position of X Logo       Default=0
YSKEWXLOGO=0   ;Y for above      Default=0
XLOGOSCALE=100   ;X Logo Scale 0-100%       Default=100

XSKEWTEXT=0   ;X Position for 'xbox' Text    Default=0
YSKEWTEXT=0   ;Y for above      Default=0
TEXTSCALE=100   ;Text Scale 0-100%       Default=100
   
CUSTOMBLOB=\Device\Harddisk0\Partition2\flubber.x;Enable custom Flubber from c:\flubber.x
CUSTOMLOGO=\Device\Harddisk0\Partition2\mslogo.bmp;Enable custom MS Logo from c:\mslogo.bmp
CUSTOMX=\Device\Harddisk0\Partition2\xlogo.x   ;Enable custom X Logo from c:\xlogo.x
CUSTOMTEXT=\Device\Harddisk0\Partition2\text.x   ;Enable custom Text from c:\text.x

LEDPATTERN=GGGG   ;Custom LED Pattern G-Green R-Red O-Orange B-Blank  Default=GGGG
BLOBBGC=0x000000;background color of blob animation     Default=0x000000


DASH1=\Device\Harddisk0\Partition2\xshell.xbe
DASH2=\Device\Harddisk0\Partition2\nexgen.xbe
DASH3=\Device\Harddisk0\Partition2\avalaunch.xbe
DEFAULTXBE=\Device\CdRom0\default.xbe

[Drilus]

CODE

USEXBX=0 ;Use Debug XBX file for Dash Load   Default=0

might want to enable that.

other than that, it looks fine.

[nirvanafan]

Yes! Got it working. Thank's, all of you.