xboxscene.org forums

Author Topic: Xecuter 2.3b Lite Plus And Xapter  (Read 105 times)

foim

  • Archived User
  • Newbie
  • *
  • Posts: 2
Xecuter 2.3b Lite Plus And Xapter
« on: August 05, 2004, 06:42:00 PM »
Hi, I know the xecuter 2.3b lite plus has it's own pogo pins and d0 connection, but will it also work with the xapter?  Or is the xapter only for the lite and pro?

thanks much
Logged

Shebang

  • Archived User
  • Newbie
  • *
  • Posts: 42
Xecuter 2.3b Lite Plus And Xapter
« Reply #1 on: August 05, 2004, 09:29:00 PM »
Should only work for the lite and the pro, not the lite plus.
Logged

foim

  • Archived User
  • Newbie
  • *
  • Posts: 2
Xecuter 2.3b Lite Plus And Xapter
« Reply #2 on: August 06, 2004, 12:20:00 AM »
hmmm, thanks for the info
Logged

timcki

  • Archived User
  • Newbie
  • *
  • Posts: 12
Xecuter 2.3b Lite Plus And Xapter
« Reply #3 on: August 08, 2004, 09:56:00 AM »
QUOTE (foim @ Aug 6 2004, 01:42 AM)
Hi, I know the xecuter 2.3b lite plus has it's own pogo pins and d0 connection, but will it also work with the xapter?  Or is the xapter only for the lite and pro?

thanks much

I am using the xapter with  an xecuter 2.3b  lite plus

The problen is the chip hits the IDE cable when it is turned up side down....
I solved this by making my own  3 inch 12 pin ribbon cable.....
I covered all the connections,(pogo pins and D0  pins) with electical tape
I mounted it to the side just like the wire install of the 2.3b lite
Parts cost about $1.00 at my local electronics store

Tim
Logged

oxjeremy334

  • Archived User
  • Sr. Member
  • *
  • Posts: 303
Xecuter 2.3b Lite Plus And Xapter
« Reply #4 on: August 08, 2004, 12:13:00 PM »
Why in the fuck would you want to ever use the xapter with a lite+???...also, turned upside down, the 2.3blite+ does not hit the ide cable, it was the previous versions, I know, I have hotswapped them via pinheader.
Logged