Topic: Is Xecuter 2.3 Lite Compatible With The V1.6 Xbox? (Read 1804 times)

DiscoPotato · « **Reply #45 on:** July 08, 2004, 11:13:00 PM »

so X2.3B works w/ Evox m8 bios by pre-flashing the chip? Any crashes?

thanks!

-Jae

gsgleason · « **Reply #46 on:** July 09, 2004, 04:41:00 AM »

are you guys who got it to work using the ground wire with the screw still? Are there multiple ground connections on the chip? I would think that if you could get the chip down to one main ground, and you put a switch on it, that would take care of the constant power issue.

Diablov90 · « **Reply #47 on:** July 09, 2004, 08:11:00 AM »

gsgleason · « **Reply #48 on:** July 09, 2004, 08:34:00 AM »

that sounds good. good thinking.

Diablov90 · « **Reply #49 on:** July 09, 2004, 08:41:00 AM »

Diablov90 · « **Reply #50 on:** July 09, 2004, 10:26:00 AM »

Ill have a picture in a couple of hours, but when i disable the chip it frags.

xbackups · « **Reply #51 on:** July 09, 2004, 10:56:00 AM »

will this work with Xecuter 2.2 or 2.3a chips?

Diablov90 · « **Reply #52 on:** July 09, 2004, 11:19:00 AM »

http://sio.midco.net/diablov90/

Dplusplus · « **Reply #53 on:** July 09, 2004, 11:29:00 AM »

counter terrorist dan · « **Reply #54 on:** July 09, 2004, 11:35:00 AM »

wow

What kind of camera do you have? those pics are very nice

sonob · « **Reply #55 on:** July 09, 2004, 01:00:00 PM »

Why would you take the 5V lead from the usb? That should still be there right? I thought it was just the 3.3V that was disconnected. Or is the 5V always connected even with the power off thats why the chip stays on?

Diablov90 · « **Reply #56 on:** July 09, 2004, 01:14:00 PM »

PS: Its a Fuju Finepix, 2.0 megapixels

TeaTime · « **Reply #57 on:** July 09, 2004, 01:21:00 PM »

on the 5v cuz i play on xlive... would a switch on the 5v shut off the switch? from what i read if there is no chip the ms dash boots just fine (after the rebuild) so if i cut the power to the chip the ms dash should boot up (why the existing switch doesn't do that?)

FierceGaming · « **Reply #58 on:** July 09, 2004, 01:23:00 PM »

Diablov90 used my box to flash the chip

....all is well. And read what he said above how to get 5v instead of 3.3v...

TeaTime · « **Reply #59 on:** July 09, 2004, 01:31:00 PM »

now iam totaly confused....
if the d0 now constantly grounded y would disabling via the switch makes the frags?

Author Topic: Is Xecuter 2.3 Lite Compatible With The V1.6 Xbox? (Read 1804 times)