xboxscene.org forums

Pages: 1 ... 8 9 [10] 11 12

Author Topic: Is Xecuter 2.3 Lite Compatible With The V1.6 Xbox?  (Read 1806 times)

insurektion

  • Archived User
  • Newbie
  • *
  • Posts: 7
Is Xecuter 2.3 Lite Compatible With The V1.6 Xbox?
« Reply #135 on: July 17, 2004, 10:15:00 PM »
QUOTE (oeneas @ Jul 17 2004, 04:08 PM)
ok, i modded everything again. and it WORKED... atleast for a few minutes.... i was able to boot up, and put the new hardrive in. And transfer some apps and 1 game. Rebooted, and tried to play the game(PsiOps), and it worked. Rebooted. And thats where nothing happens... i just sits on the MS startup, with  Evox in the upper left corner, and MS on the bottom... help

bank 2?
Logged

oeneas

  • Archived User
  • Newbie
  • *
  • Posts: 6
Is Xecuter 2.3 Lite Compatible With The V1.6 Xbox?
« Reply #136 on: July 17, 2004, 11:11:00 PM »
yeah, its on bank 2... it just booted up, shows evox in the upper left corner, then freezes..... i tried booting to the evox disc... no luck
Logged

BoBlindersX

  • Archived User
  • Newbie
  • *
  • Posts: 7
Is Xecuter 2.3 Lite Compatible With The V1.6 Xbox?
« Reply #137 on: July 18, 2004, 06:47:00 AM »
hey, I installed my chip, and I am using the power of the LPC, so the chip is on, the thing is when the Xbox is off the lights are working and are all the way on, when I turn the Xbox on, it frags, and the lights are barely on. Right now I am using 30 ga wrapping wire. And suggestions, I know the chip is flashed, also the I had to extend the ground cable because I am using an old Xbox case that I screwed up a long time ago with a solder less chip. (how important is the a good ground connection on a 1.6).
Logged

dougMod

  • Archived User
  • Hero Member
  • *
  • Posts: 1029
Is Xecuter 2.3 Lite Compatible With The V1.6 Xbox?
« Reply #138 on: July 18, 2004, 12:38:00 PM »
ya this is great now a 1.6 solution
Logged

the_buzz_man

  • Archived User
  • Newbie
  • *
  • Posts: 10
Is Xecuter 2.3 Lite Compatible With The V1.6 Xbox?
« Reply #139 on: July 18, 2004, 03:04:00 PM »
Can someone do me a favor? Let me know if Halo is playing fine on this 1.6 mod or if anyone else is having problems. I have been unable to play it from either my backup disc or from the HDD. It shows the loading screen then freezes. May be a media problem, but wanted to make sure.

Thank You!!

the_buzz_man
Logged

the_buzz_man

  • Archived User
  • Newbie
  • *
  • Posts: 10
Is Xecuter 2.3 Lite Compatible With The V1.6 Xbox?
« Reply #140 on: July 19, 2004, 11:01:00 AM »
QUOTE (insurektion @ Jul 19 2004, 01:28 PM)
halo runs beautifully on my xbox.

1.6 x2.3b with modded m8 bios for lga and igr and pretty colours

Thank You

Will try again with another media later.

the_buzz_man
Logged

nachonut

  • Archived User
  • Full Member
  • *
  • Posts: 240
Is Xecuter 2.3 Lite Compatible With The V1.6 Xbox?
« Reply #141 on: July 19, 2004, 11:57:00 AM »
So has anybody tried setting up a pin install for the x2.3b lite chip yet? in that I mean getting it to run off the pin header plus the 5v from say the hard drive so that the chip is on when the sysetm is on only?

EDIT:  I'm just sayhing this because i'm not sure if it's completely healthy for the chip to be on 24/7.
The sysetm works fine with having the retail in bank1 and m8 modded in bank2.  Resetting the sysetm through the menu doesn't work, so who cares...  Powering off and letting it sit for a few, changing banks and booting works fine. So the chip does what it's supposed to.
Enable/disable is always left enable since disable frags.  Bank 1 is retail so that's that for the enable disable and bank 2 is well.. what else.

Now that I typed for way too long...  does it really matter that the chips on all the time.
Logged

HunterK

  • Archived User
  • Newbie
  • *
  • Posts: 12
Is Xecuter 2.3 Lite Compatible With The V1.6 Xbox?
« Reply #142 on: July 19, 2004, 08:34:00 PM »
connect all wires as smartxx 1.6 diagram

dont connect 3.3v link

connect grey d0 wire to lframe

if you want an alternative 5v there are many on the board

cant get any easier instructions that that.
Logged

big_jonas

  • Archived User
  • Newbie
  • *
  • Posts: 4
Is Xecuter 2.3 Lite Compatible With The V1.6 Xbox?
« Reply #143 on: July 20, 2004, 09:06:00 AM »
QUOTE (HunterK @ Jul 20 2004, 04:37 AM)
connect all wires as smartxx 1.6 diagram

dont connect 3.3v link

connect grey d0 wire to lframe

if you want an alternative 5v there are many on the board

cant get any easier instructions that that.

Thank you, but remember that not all of us are expert in hardware and have no clue what you mean with

"dont connect 3.3v link

connect grey d0 wire to lframe"

I was hoping for a more step-by-step-detail-with-pictures kind of instructions. For people that are not very familiar with hardware codes and names.

Anyone interested?

I forgot. I have a programmer, so i have no problem flashing the bios before hand.
Logged

gsgleason

  • Archived User
  • Full Member
  • *
  • Posts: 197
Is Xecuter 2.3 Lite Compatible With The V1.6 Xbox?
« Reply #144 on: July 21, 2004, 08:30:00 AM »
Perhaps you should start by reading this entire thread in it's entirety from the beginning.  All of your questions have been answered.
Logged

wickedmofo

  • Archived User
  • Newbie
  • *
  • Posts: 5
Is Xecuter 2.3 Lite Compatible With The V1.6 Xbox?
« Reply #145 on: July 21, 2004, 01:42:00 PM »
anyone know if a 160 gig will work with this bios. Someone asked this earlier, but no one addressed it
Logged

the_buzz_man

  • Archived User
  • Newbie
  • *
  • Posts: 10
Is Xecuter 2.3 Lite Compatible With The V1.6 Xbox?
« Reply #146 on: July 21, 2004, 03:00:00 PM »
QUOTE (wickedmofo @ Jul 21 2004, 08:45 PM)
anyone know if a 160 gig will work with this bios. Someone asked this earlier, but no one addressed it

unless something has changed recently, the current bios will only support 137gb. you can put the 160 in, but it will only show up as 137. Hopefully this will be fixed soon.

the buzz man
Logged

spyman

  • Archived User
  • Full Member
  • *
  • Posts: 193
Is Xecuter 2.3 Lite Compatible With The V1.6 Xbox?
« Reply #147 on: July 21, 2004, 03:34:00 PM »
QUOTE (the_buzz_man @ Jul 21 2004, 11:03 PM)
unless something has changed recently, the current bios will only support 137gb. you can put the 160 in, but it will only show up as 137. Hopefully this will be fixed soon.

the buzz man

there is one out there but i can't get ahold of it sad.gif
its got the LBA edited to allow >137gb
Logged

jpdeuce

  • Archived User
  • Newbie
  • *
  • Posts: 22
Is Xecuter 2.3 Lite Compatible With The V1.6 Xbox?
« Reply #148 on: July 21, 2004, 09:29:00 PM »
QUOTE (big_jonas @ Jul 20 2004, 05:09 PM)
Thank you, but remember that not all of us are expert in hardware and have no clue what you mean with

"dont connect 3.3v link

connect grey d0 wire to lframe"

I was hoping for a more step-by-step-detail-with-pictures kind of instructions. For people that are not very familiar with hardware codes and names.

Anyone interested?

I forgot. I have a programmer, so i have no problem flashing the bios before hand.

All the answers you need are in this thread...even WITH pictures...if you have any specific q's PM me instead of filling up this thread with anymore questions that have already been answered....I think it's about time this thread be stickied and locked since I think all of the questions have been answered.
Logged

wickedmofo

  • Archived User
  • Newbie
  • *
  • Posts: 5
Is Xecuter 2.3 Lite Compatible With The V1.6 Xbox?
« Reply #149 on: July 22, 2004, 09:16:00 AM »
Did it perfect last night. Everything works (minus 137+ support). The only problem I has was with the dashboard not loading.
Logged
Pages: 1 ... 8 9 [10] 11 12
« previous next »