Topic: Flash Fxp - - - It Wont Let Me Connect (Read 112 times)

goleafsgo_21 · « **on:** January 04, 2006, 01:37:00 PM »

Hey i have flash Fxp and cannot connect to my xbox i have a LTOPX modchip and i could connect with rflasher fine to my xbox.

I need to install slayers 4 my xbox but it wont connect i have v1.0

Any help would be greatly appreciated

beutel · « **Reply #1 on:** January 06, 2006, 04:47:00 AM »

i guess LT has no built in ftp server.
you need to boot slayers with an fixed ini(enable ftp in evox ini) to start a ftp server from there !
then you can access your box !

tnbigdawg · « **Reply #2 on:** January 11, 2006, 12:58:00 AM »

Or use Smartxx's Remote Flasher and run ED@chip with it to gain FTP access on the Xbox.

But it's easier and more reliable to have a FTP enabled dashboard.

create · « **Reply #3 on:** January 15, 2006, 01:21:00 PM »

You can't flash ED@chip to a LTOPX; check here...you can run it from RAM though. I haven't tried to run ED@chip from RAM so I can't vouch for it; I think that's what tnbigdawg is talking about...running ED@chip from RAM using Remote Flasher since you can't run it from a flashed bank.

Easiest thing to do is use an Evox boot disc with FTP configured. If you have a Slayers disc (Evox boot disc basically) and your chip is installed and a BIOS has been uploaded through HTTP or another method why not just install Slayers from that disc after booting off it?

This post has been edited by create: Jan 15 2006, 09:28 PM

JustinT9669 · « **Reply #4 on:** January 15, 2006, 01:42:00 PM »

1. Download Remote Flasher
2. Install and load it.
3. Boot your xbox to the OS screen
4. On the Remote Flasher, Search for Xbox and select your xbox
5. Then click on the ED@chip tab and click Run Original Ed@Chip.

goleafsgo_21 · « **Reply #5 on:** January 25, 2006, 12:01:00 PM »

QUOTE(JustinT9669 @ Jan 15 2006, 03:42 PM)

1. Download Remote Flasher
2. Install and load it.
3. Boot your xbox to the OS screen
4. On the Remote Flasher, Search for Xbox and select your xbox
5. Then click on the ED@chip tab and click Run Original Ed@Chip.

And what would running Original ED@CHIP do?

Author Topic: Flash Fxp - - - It Wont Let Me Connect (Read 112 times)