Print

[xman954]

QUOTE

A video .bin? Is this for the boot up flubber? How is it coded?

force 480P and RGB VGA(SoG)
bit0 = 480P
bit1 = VGA

[VanydotK]

Hey all, I just used Ndure 3.1 + XboxHDM to softmod my xbox and so far so good but I do have a few questions. I noticed that my softmodded xbox is running UnleashX as a dash. I would like to use EvoX as my default dash, so how do I do that?

Also, previous to doing this softmod I accidently formatted my C drive on my xbox so my MS dash is gone. Everytime I try to launch the MS dash from UnleashX it just relaunches UnleashX. How can I get my MS dash back?

Thanks in advance and thanks roach for making ndure!

[jakejm79]

Just wanted to say a big thanks to kingroach, I used Ndure 3.1 to soft mod my chipped box, I then tsoped it and removed my old mod chip, ftped over my backup of C and I was all done in about an hour. Was simple with zero problems.

[snakesnoke]

Today it was my first try to softmod my xbox. I used the hotswap with "Ndure Installer For Pc 3.1" and all went fine. The only thing is, when I start the original microsoft dashboard from the Uleash menu, i get a xbox error message that something is wrong with the xbox. Another question is if I can add evo x dashboard too, so I can use both, uleah or evo x. Also I still have to find out how I can add apps in the uleash menu, soI don't have to start my apps from the file explorer.

[snakesnoke]

In the left upper corner: "21"
"Service required  Call customer support"

[kingroach]

thats your shadowc.. copy retail C drive files from slayers disk to C drive.. Does your xbox boots ms dash with eject button?..

[snakesnoke]

Seems like I cannot write to C: on the hard disk. And since I have a component cable on my lcd tv I would like to configure the video settings there.

This post has been edited by snakesnoke: Sep 25 2007, 03:34 PM

[kingroach]

launch E:\ndts\default.xbe.. now delete C:\shadowc\shadowc.img and copy a fresh shadowc from your coputer to xbox's C:\shadowc\ folder.. ( shadowc.img is created by the installer in C folder).. now shadowc should be writable.. copy a fresh C drive files from slayers disk to shadowc..

[snakesnoke]

Thanks, it works.

Any idea why I have in the game Beyond Good & Evil this effect?

(IMG:http://www.animeplanet.de/bge.jpg)

[snakesnoke]

*add* In the ms dash I can only configure the Video (Normal, Letterbox, Wide Screen) and PAL-60 (enable, disable). In the system settings of UnleashX there are modes like 480p, 720p & 1080i.

Not sure if I have to enable all of them and I read somewhere that you have to configure the video mode for the component cable in the ms dash. In xbmc I can't configure the video mode (I can only change the Video Aspect) and I can't see the entire Menu. It's cut down at the bottom.


If I load a XBox game from HD I can't reset the XBox with the eject button. I always have to power off the XBox. Any way to use the eject button as a reset?

The Live Update in UnleachX doesn't work. It downloads and at the end you only get the message "Unable to retrieve data from the server.".


Hopefully my last questions... :/

This post has been edited by snakesnoke: Sep 26 2007, 07:19 PM

[kingroach]

the 1080i/720p option will show up if you convert the xbox region from PAL to NTSC.. I dont k ow if xbmc overwrites that.. you can ask in xbmc forum that if you can use hd settings without converting the xbox region..

about eject.. you need to IGR ( LT+RT+back+start).. nkpatcher is configured so that xbox doesnt reset on eject.. you can compile your nkpatcher with this settings disabled..

may be because server is down.. unleashx or any other dash doesnt have anything to do with softmod..

[snakesnoke]

How can I change to NTSC? When I start the Enigmah Video Switch via File Browser and switch to NTSC, after I  reboot the XBox and another start of Enigmah it's PAL. I tried to make an "eeprom_off.bin" and still it doesn't work.

And I don't exactly understand your description about the eject button, sorry.

[snakesnoke]

Ok, when I boot with E:\ndts\default.xbe I can change to NTSC with Enigma Video Changer and it keeps this setting.

Also when botting the MS Dash via File Explorer in E:\ndts\default.xbe the MS Dash keeps it's HD setting. So you have to change this things always this way.

Only question is now which HD resoltion to chouse. My Samsung LE-32R71B runs with all modes, but 1080i seems to be a bit slower. A friend told me that 1080i would be the wrong resolution for my LCD TV because it has only (1366 x 768) it's hd ready and can't support the full hd resolution. As I told you for me it's much sharper. *wonders*

[snakesnoke]

Now all three modes enabled in the ms dash and using 1080i for XBMC. Looks super clear and sharp. Maybe I'll switch to XBMC as the standard dashboard. The FTP of UnleashX seems to be faster though. But I don't see any other benefits of UnleashX? Need to check if you can customize the menu of XBMC and to let it automatically play music when start.

[dpr99]

i installed ndure 3.1 and when i use a component cable on a sd tv the picture is scrambled.  I hooked it up to a hdtv and the picture is fine and in the xboxdash all the hd settings are disabled.  so i think the high def or progressive settings are coded into nkpatcher.  is there anyway to change this?