xboxscene.org forums

Author Topic: Help! Error 05!  (Read 139 times)

nightmare84j28

  • Archived User
  • Full Member
  • *
  • Posts: 219
Help! Error 05!
« on: October 02, 2006, 10:39:00 AM »
You haven't locked the hard drive.

Go back to the page of the tutorial and read under "LOCK/UNLOCK YOUR HD:"

Should be back in business after that  wink.gif

Also, not all harddrives are lockable but yours is new and most likely is!
Logged

Cappi

  • Archived User
  • Full Member
  • *
  • Posts: 115
Help! Error 05!
« Reply #1 on: October 02, 2006, 01:44:00 PM »
You must have a backup of your eeprom in the eeprom folder before you make the iso. Xboxhdm has to lock it with your xbox's eeprom.
Logged

SICKdimension

  • Archived User
  • Hero Member
  • *
  • Posts: 953
Help! Error 05!
« Reply #2 on: October 02, 2006, 03:09:00 PM »
Moving to the exploits forum, where you found the tutorial.
Logged

agentdz015

  • Archived User
  • Newbie
  • *
  • Posts: 23
Help! Error 05!
« Reply #3 on: October 02, 2006, 04:28:00 PM »
I tried to do this, but I honestly have no idea what you are talking about.  When I go into my computer's bios, there is no "autodetect" option in the hard drives section... just the model numbers of the drives connected listed.

When I go into the options on each drive listed, I get a series of options...

TYPE  : (Not Installed / Auto / CDROM / ARMD)
LBA/Large Mode : (Disabled / Auto)
Block(Multi-Sector Transfer) : (Disabled / Auto)
PIO Mode : (Auto / 0 / 1 / 2 / 3 / 4)
DMA Mode : (Auto / swdma0,1,2 / mwdma0,1,2 / udma0,1,2,3,4,5,6)
SMART Monitoring : (Auto / Disabled / Enabled)
32Bit Data Transfer : (Disabled / Enabled)


Do any of these options make any sense...?

I still feel totally in the dark.

Logged

agentdz015

  • Archived User
  • Newbie
  • *
  • Posts: 23
Help! Error 05!
« Reply #4 on: October 02, 2006, 06:31:00 PM »
I'm totally fine with starting over.  I just need someone to point me in the right direction.  Any help?

here are the options I see right now...:

1 - someone tells me what I did wrong and I go back and do it right.

2 - someone tells me a way (other than xboxhdm) to lock my new hard drive.  (I think I have done everything correctly except lock the drive... any apps out there that can do it for me?)

3 - someone points me to a tutorial I haven't tried.

----

Thanks again - god, my eyes hurt from surfing the forums / reading tutorials too much...
Logged

TheAgedGamer

  • Archived User
  • Full Member
  • *
  • Posts: 101
Help! Error 05!
« Reply #5 on: October 02, 2006, 07:55:00 PM »
Try not plugging in your IDE cable until the 1st xboxhdm menu appears. Then plug in your hd and try using the lockhd -a option. I have an E-machine and this is the only way I can get a hd to lock. Hope this helps.
Logged

agentdz015

  • Archived User
  • Newbie
  • *
  • Posts: 23
Help! Error 05!
« Reply #6 on: October 02, 2006, 09:19:00 PM »
No dice...

though I did notice something else - while booting linux (after you select 3 on the first menu) it recognizes the new hard drive, but then it says something about not recognizing the partition tables or something...

So - am I trying to do the right thing? or should I back up and try something new / repeat some steps?

Logged

LiquidICE

  • Archived User
  • Newbie
  • *
  • Posts: 14
Help! Error 05!
« Reply #7 on: October 03, 2006, 04:30:00 AM »
LBA/Large Mode : (Disabled / Auto)  Set this to disabled and try again.
Logged

agentdz015

  • Archived User
  • Newbie
  • *
  • Posts: 23
Help! Error 05!
« Reply #8 on: October 03, 2006, 03:06:00 PM »
Again, no dice.

So - update.

I have two hard drives (the original from the xbox, which was working when I started the process, and the new 160 gig hard drive) neither of which currently work in my xbox.

I am very frustrated, and need at least a small clue on a process I can attempt which will allow me to have a playable xbox.

At this point, I would settle for a process that would get the original hard drive back into working order, because it doesn't look like anyone can help me get the new drive working with the xbox.

Someone - please help!

thanks

chris - [email protected]

Logged

LiquidICE

  • Archived User
  • Newbie
  • *
  • Posts: 14
Help! Error 05!
« Reply #9 on: October 03, 2006, 04:38:00 PM »
TYPE : (Not Installed / Auto / CDROM / ARMD) Set this to Not Installed and see if XboxHDM still detects it. After that try to lock it.
Logged

agentdz015

  • Archived User
  • Newbie
  • *
  • Posts: 23
Help! Error 05!
« Reply #10 on: October 03, 2006, 05:51:00 PM »
still no luck...

i type "lockhd -a", it asks me to confirm, i press "y", and still "status locked : no"

do i have any other options?

thanks,
chris
Logged

TheAgedGamer

  • Archived User
  • Full Member
  • *
  • Posts: 101
Help! Error 05!
« Reply #11 on: October 03, 2006, 06:50:00 PM »
Do you have access to another PC? If so try locking it on another one. Pc's can sometimes be finicky.
Logged

agentdz015

  • Archived User
  • Newbie
  • *
  • Posts: 23
Help! Error 05!
« Reply #12 on: October 04, 2006, 02:05:00 PM »
Hey.  I found a friend who will let me use his PC.  Is there anyone out there who has been through this who will be online around 9pm (central, USA time) just in case I have any questions?

If so, email me at [email protected] with how to get ahold of you.  (AIM, or any other messenger program should be fine.  Phone is fine too, but probably not necessary.)

Thanks.

Logged

LiquidICE

  • Archived User
  • Newbie
  • *
  • Posts: 14
Help! Error 05!
« Reply #13 on: October 04, 2006, 02:34:00 PM »
QUOTE(agentdz015 @ Oct 4 2006, 03:12 PM) View Post

Hey.  I found a friend who will let me use his PC.  Is there anyone out there who has been through this who will be online around 9pm (central, USA time) just in case I have any questions?

If so, email me at [email protected] with how to get ahold of you.  (AIM, or any other messenger program should be fine.  Phone is fine too, but probably not necessary.)

Thanks.

I will be here.....just PM me and I will try to help you the best I can. wink.gif
Logged