Print

[lama_]

Thanks!
And if I want to use the EXTRAS folder that I just updated in step 8 to 11 in your read me file I just have to FTP this folder to my Xbox ?  or if the new udata.zip (1,2) that I just update will install the extra option 1.1.1?

I'm sorry for my question but I'm a noob in softmoding and I want to do it like it should to run the 1.1.1 version

[krayzie]

you just ftp the extras to e:\apps

[XXDICEONEXX]

HD display issues, can you help me out?

I have used your installer with great success... up until I need my HD settings to take.
I was wondering since your installer shadows a C and creates a "virtual" eeprom( I think, I dunno how this stuff works...) if that is why when I go to the MSdash, or EvoX, or unleashX and turn on HD resolution support and then reboot to my "in use" dash XBMC, that these higher video resolutions of not available.

I am having a REALLY hard time figuring this out.
I would very much like to get my HD running on my xbox and also would like to continue signing the praises of your installer.

thanks, I know you're busy.

but please get back if you can... I can't seem to find a answer.

[cerealkillajme]

You can remove the softmod and then edit the video settings in the M$dash, then resoftmod and you will have HD resolutions. Or you can disable the virtual eeprom via Krayzies Extras and then make changes as needed.

[A Murder of Crows]

actually, if done with krayzie's from start to finish, you should be able to just go into the M$ dash and enable the settings from there.  it affects the Virtual eeprom only, but if the eeproms match, the virtual should be able to control things.

[firedomain]

Hey Krayzie,
                   I have the Ndure 1.1 exploit on my xbox & have been using it ever since i learnt how 2 put it there & removed my modchip (& returned all the xbox files back to stock)

but i have come across a problem with the game "Crash Twinsanity"
i have backed it up onto disc (it worked when i had my xbox chipped) but now it doesn't work.
i tried to copy it to the xbox HDD & it still wont work. when i try to load it it simply goes to a black screen & stays there. & the in game reset wont work.

i have no idea why it wont work.... i have tried to boot the game with other dash's (seeing as in the past an old version of XBMC wouldn't run burnout from the HDD) but still no luck.

could this be a flaw in the exploit? or is there some other way that someone can help me with this problem....
its a pity that this great family game is unusable on my xbox.

...oh.. & for some reason my xbox now (& for a while now) in XBMC is detecting itself as NTSC when its PAL
& the video mode options don't give me the option of PAL anymore!!!! not sure if this is anything to do with Ndure... but it used to be detected as PAL & even when i fully wipe & reinstall XBMC it still says NTSC (not such a prob.. just a shit when i try & use it on a TV that doesn't support NTSC!)


Thanx in advance, Firedomain

[firedomain]

hey again.
i just found out that the game works when i'm in professional mode (through the extras)
its the only game i've ever had problems with professional mode in.
is there anyway i can turn professional mode on permanently (whether it be a modification to an xml file or some other way)
i know enough about my xbox 2 not stuff it up (permanently at least) in professional mode.

sorry for the previous long (& now mostly pointless) post.

Thanx, Firedomain

[firedomain]

ok....... im soooooo sorry.. i've just solved all my problems & now everything is perfect!!!!!!!


soooo sorry for the waste of time posts!

cya's

[soopawhitee]

Hi Krayzie,
I have 2 issues I was hoping you could address.

My xbox currently has your SC 1.1 ndure mod installed, I tried upgrading to 1.1.1 using the Extra's folder following your instructions precisely.  When I get to the point of actually loading the extras however, my screen flashes a few times and goes right back to my XBMC dashboard.  I've tried both methods of updating it - delete the whole folder and ftp over a fresh folder(which i grabbed from the usual places), and I also tried deleting the default.xbe located in "Extras\files\xtras\".

My other question is that I found most retail games cold boot fine with your mod, but Halo2 just seems to sit at a black screen until you eject it and load it up while in "mod" orange light mode...  Am I the only one?  It happens to me on all the Xboxs I've used your package on...


Thank you for your time and attention,

Whitee

This post has been edited by soopawhitee: Apr 17 2007, 11:14 PM

[soopawhitee]

QUOTE(soopawhitee @ Apr 17 2007, 10:44 PM)

Hi Krayzie,
I have 2 issues I was hoping you could address.

My xbox currently has your SC 1.1 ndure mod installed, I tried upgrading to 1.1.1 using the Extra's folder following your instructions precisely.  When I get to the point of actually loading the extras however, my screen flashes a few times and goes right back to my XBMC dashboard.  I've tried both methods of updating it - delete the whole folder and ftp over a fresh folder(which i grabbed from the usual places), and I also tried deleting the default.xbe located in "Extras\files\xtras\".

My other question is that I found most retail games cold boot fine with your mod, but Halo2 just seems to sit at a black screen until you eject it and load it up while in "mod" orange light mode...  Am I the only one?  It happens to me on all the Xboxs I've used your package on...
Thank you for your time and attention,

Whitee

Hmm... for some odd reason the upgrade menu finally came up when loading from Unleash X... not sure why it doesn't like being loaded from XBMC...

[penn919]

I just used krayzie's 1.1.1 Update Kit and I was successful with the upgrade; However, after I switched off the mod and played a game of Mechassault, The run linux save will no longer load. I tried deleting the other game save, but that didn't work.

Should I delete the run linux save and then reload it again? Would that allow me to access the Krayzie Installer menu so I can re-enable the softmod?

[ldotsfan]

How did you switch off the softmod?

[krayzie]

QUOTE(penn919 @ Jun 2 2008, 11:15 AM)

I just used krayzie's 1.1.1 Update Kit and I was successful with the upgrade; However, after I switched off the mod and played a game of Mechassault, The run linux save will no longer load. I tried deleting the other game save, but that didn't work.

Should I delete the run linux save and then reload it again? Would that allow me to access the Krayzie Installer menu so I can re-enable the softmod?

Playing MA with a MA exploit will most likely corrupt the saves. I would delete all MA saves and transfer a fresh 1.1.1 MA save. In this save you need to activate the afer install menu so:
Rename config.xml to config1.xml
Rename  config2.xml to config.xml

You can either do this after you get ftp acces or prior to transfering the save

[penn919]

I was able to load the run linux game save with my Mechassault copy, but after I selected the "switch softmod off" option, my xbox was reverted back to the stock dashboard and now the run linux game save will not load via mechassault anymore.

After I switched the softmod off, I DID play a game of mechassault briefly. I'm not sure if that has anything to do with this problem, but I thought it may be appropriate to inform you of that.

........and just a few other things

1. I DO have the correct copy of Mechassault to run the exploit.
2. Other than play a game of mechassault, I did NOT do anything else.
3.All of the mod files are still on the xbox. Unleash installer, xbmc dashboard, and a couple other apps. I know this because I can still see their their Icons when I peruse through the xbox HDD.

[penn919]

Krayzie,

I cannot find the 1.1.1 installer in the usual place. Where can I find Krayzie Ndure Installer v1.1.1 ? I only see Krayzie Ndure Installer v1.1.