Print

[a6307a]

QUOTE(Heimdall @ Jan 19 2012, 04:11 PM)

If you're using a very old softmod you might...

No, Ndure 3.1 + xboxhdm 1.9

QUOTE(Heimdall @ Jan 19 2012, 04:11 PM)

.... If you want to replace the BIOS you will need to find or make a BFM (boot from media) copy of the BIOS you want to use.

Explain in more detail, please. Thks.
PS http://wiki-scene.com/BIOS_(Xbox)

QUOTE(Heimdall @ Jan 19 2012, 04:11 PM)

.... HOWEVER, as PBL is in a folder called ndts then it's probably been put there in the past by someone experimenting with it, because ndts is used by Kingroach NDURE softmods, which patch the MS BIOS in-memory.

O`k, I got it.

This post has been edited by a6307a: Jan 19 2012, 04:28 PM

[a6307a]

I'm using component High Definition cable (on XBOX select NTSC + 480p, 720p enable). However, the image fills the green. If run the PBL Metoo Edition and BFM bios (eg M8plus) HD picture - normal.
I created a folder in E:\APPS, put it in PBL Metoo Edition and BFM bios, and then added a new item in the menu Unleashed dashboard - "HD Video fixer". Everything works. But I want to automate this process ...

Sorry....

[Heimdall]

You selected the wrong options when you built the NDURE 3.1 files - you selected the RGB option.

The solution is simple. Run e:\ndts\default.xbe, and select the option Use Nkpatcher.67 (With Retail).

[a6307a]

QUOTE(Heimdall @ Jan 19 2012, 07:37 PM)

You selected the wrong options when you built the NDURE 3.1 files - you selected the RGB option.

The solution is simple. Run e:\ndts\default.xbe, and select the option Use Nkpatcher.67 (With Retail).

Thanks, thanks - all works excellent!!!!!!!
,

[loth77]

hi all,
i'm a newbie in xbox modding....
i just had a xbox few days ago and i'm trying to mod it
it has kernel 5713 and dashboard 5659

i have followed all the instructions, created the iso, burnt it, booted, hotswapped...

at prompt i start xbrowser and it works, finds the xbox hd in /dev/hda and start the file manager
i go in ndure folder, open it and start the ndure script...
at this point the problem...

i have just this as answer...:

looking for CD-ROM in /dev/hda...
looking for CD-ROM in /dev/hdb...
looking for CD-ROM in /dev/hdc...
...
looking for CD-ROM in /dev/hds...
looking for CD-ROM in /dev/hdt...
disk /dev/hda doesn't contain a valid partition table

and it stucks there...

i'm quite sure i have done all the steps in the right way... and that the xbox hd is unlocked
i have tried to do it with unlocked drive and the xbrowser doesn't even load...

so... i've tried million times and can't get forward this step...
can anyone help me?

thanks!

[Heimdall]

How many IDE ports are there on your PC motherboard? If you only have one then that's your problem, and you need to use xboxhdm 2.2 instead of xboxhdm 1.9.

[loth77]

2 ide ports
it is an older machine

i also have a newer machine with just one ide, i wanted to try the 2.2, but i can't find a newbie proof tutorial that i can follow, so i was keeping my fight on the old computer.

have you got any suggestion... or a link to an easy to follow guide?

i have found this... http://forums.xbox-scene.com/index.php?sho...690646&st=0
but for me it is not easy to follow, too many steps are skipped for my few knowledge of this subject
(and also my not perfect english)

This post has been edited by loth77: Feb 6 2012, 02:42 AM

[klokwyze]

great tutorial.... love using these systems for old emulator boxes.

ndure + xboxhdm + hotswapping =  

thanks again!

[loth77]

finally...!
it worked on a k6-2 400mhz machine that i have found in the basement...
no powersupply, no cd-rom reader, no hard disk, no nothing....
well... just the case with motherboard, cpu and 128 mb ram

thanks

[immun]

QUOTE(loth77 @ Feb 5 2012, 09:15 PM)

looking for CD-ROM in /dev/hda...
looking for CD-ROM in /dev/hdb...
looking for CD-ROM in /dev/hdc...
disk /dev/hda doesn't contain a valid partition table

and it stucks there... i'm quite sure i have done all the steps in the right way... and that the xbox hd is unlocked

Same here. So I switched to another computer and it worked immediately. Sort of. Cause when I'd done a backup of C on E and selected 1 to start the 3-part update process it got stuck at part 2 with this:

CODE

Copying ndure files
cp: Read error: Input/Output error
Copying c drive backup to shadow
cp: cannot create directory 'xbox/hack/Audio' : Read-only file system
cp: cannot create directory 'xbox/hack/BiosCheck' : Read-only file system
cp: cannot create directory 'xbox/hack/NewBioses' : Read-only file system
cp: cannot create directory 'xbox/hack/Skin' : Read-only file system
cp: unable to open 'xbox/hack/evox.ini' : Read-only file system
cp: unable to open 'xbox/hack/evoxdash.xbe' : Read-only file system
....
cp: /CD/ndure/C/shadow/resc/*: No such file or directory
Part 3 of 3:
Done... now exiting

I figured it could not write the complete udate so I did a restore of the C Backup done previously. However, upon starting the xbox I got a service error 13. I deviated from this tutorial only in not Installing Updated Backup Script cause the link was dead and I figured, since my download of ndure 3.1 was newer than this tutorial referencing 3.0, it would have a newer script as well (had to strip the htm extension though).

Now what? How do I get this fixed? Trying softmodding/hotswapping again? I'd also like to upgrade to a 500 GB HDD in the process if possible. I'm a total Linux/Xbox newbie so please bare with me but wouldn't it be possible to extract the unlock key while in hotswap mode and write it to a blank HDD under Linux, copy over the necessary files and be done with it? Thanks for any pointers.

[kenzo42]

Which Xboxhdm and Slayer's version do you recommend with NDURE3.1? Will Xboxhdm 1.9 work? Will Slayer's 2.7 work?

Thanks.

QUOTE(Heimdall @ Oct 9 2010, 10:22 AM)

You simply don't need that step any longer - Kingroach's installer makes the script file for you. It's called ndure.htm, and you just have to rename it ndure (no extension). Run Kingroach NDURE 3.1, select your Kernel version under "Kernel Selection" and select "Create XBOXHDM Installer" - leave all other options at default.

Build your xboxhdm disc using the stock C from Slayers / AID / CASH (Slayers:\SYSTEM\All\c\, or AID:\Files\Dash\ms-c.zip, or CASH:\StockFiles\c\), and the Kingroach NDURE 3.1 files you just made. Rename ndure.htm to ndure (no extension), and place it in linux/ndure/ndure. Put the stock C in linux/C, and the Kingroach 3.1 files in linux/ndure (the Kingroach C and E directories and the ndure script should be immediately below this i.e. linux/ndure/C/ and linux/ndure/E/.)

Hotswap and run xboxhdm, select option 1 - boot VGA Console, then type xboxhd, then select option 2 - Rebuild C partition on existing Xbox drive. Once that has finished exit, then type xbrowser, run the ndure script, then select option 1.

[Heimdall]

Yes.
Yes.

[kenzo42]

Thanks for the reply Heimdall. Excuse me for the xpost.

"Hotswap and run xboxhdm, select option 1 - boot VGA Console, then type xboxhd, then select option 2 - Rebuild C partition on existing Xbox drive."

1) Is this part required for the softmod (above quote)? I ask b/c I've never seen it done this way before.
2) Do I back it up before doing this?



Thanks again.

This post has been edited by kenzo42: Feb 21 2012, 10:47 PM

[Heimdall]

It's not required, but it's recommended in case your current dash isn't 5960, or you have remnants of an old softmod. A clean C partition is one less thing to go wrong with the softmod.

There's no point backing it up - you are about to replace it with a clean 5960 dash.

[kenzo42]

QUOTE(Heimdall @ Feb 21 2012, 10:57 PM)

It's not required, but it's recommended in case your current dash isn't 5960, or you have remnants of an old softmod. A clean C partition is one less thing to go wrong with the softmod.

There's no point backing it up - you are about to replace it with a clean 5960 dash.

I guess the reason I ask about the backup is because it's what saved me on my last attempt at softmod which caused read/write errors.

I was able to restore my Xbox back to its original state and use it normally b/c of the backup through Ndure3.0 (option 4 I think), otherwise I think I would have been screwed (?).

My dash is 5960 and kernal is 4034.

Thanks again. Appreciate the help Heimdall.