Print

[navanman]

I installed your excellent softmod using the default nkpatcher .67 with 160GB HD. I have lots of games, videos on F drive and 21GB on G. If I use Krayzie's Extras to switch to nkpatcher .06, will I lose the contents that is currently on F: and G: or will it integrate the disc space on G into F:

[blackxino]

My Action Replay+Memory Card order is on the way.
I have purchased the Splinter Cell game, will the Pal version work for softmoding?

I have downloaded your file Krayzie Ndure v1.1
in the SC folder, there are Rescue disc, SC save 1 & 2. What is the Resuce disc for, and the Save folders what are they for?
Do I only need 1 save in the game and use SC save 1?

by the way...i also got the CASH file,wat does it do?

[A Murder of Crows]

QUOTE(blackxino @ Mar 2 2007, 05:47 PM)

My Action Replay+Memory Card order is on the way.
I have purchased the Splinter Cell game, will the Pal version work for softmoding?

I have downloaded your file Krayzie Ndure v1.1
in the SC folder, there are Rescue disc, SC save 1 & 2. What is the Resuce disc for, and the Save folders what are they for?
Do I only need 1 save in the game and use SC save 1?

by the way...i also got the CASH file,wat does it do?

Yes, pal version will work, just make sure to use the PAL based Exploit save for splinter cell.

as for the rest of it....all your questions are answered in the readmes.  for my sanity, go back and read them.  if you don't understand, read them again.  if you still don't understand, think about if you really should be modding your box.  If you are still at a loss after that, i'll tell you

[A Murder of Crows]

QUOTE

Anyone using this (hotswap all in one disc) method be warned - there are still functions of the mod that REQUIRE the disc and the original exploit files.

Until such a time comes that zzk is able to provide 100% of the support for this on his own in an articulate manner, or unless you (the end user) are far more knowledgeable than the average user for which Krayzie's Installer was made for, it is my position that you do not use this.  This simply isn't how Krayzie's installer is meant to be used, and though it will get you modded without the disc or a memory card/action replay, some functions of your mod will be inherently crippled because that disc is missing.

No Bashing, no blaming.  We will not  be able to provide support for this method, period.  We will not be able to take any responsibility for what may happen if you use this method.

The administrator of this forum will be notified of the position and the continued stance that this should not be allowed for distribution publicly until zzk can demonstrate an ability to support those who choose to use this in a clear, concise, technical manner.

This same post will be made at the Xbox-Scene official Krayzie's NDure support thread, so that even if zzk decides it should not be here and deletes this post, people searching the X-S forums will know.

------

[A Murder of Crows]

I'm most impressed with your actions, zzk.  when some things settle down in my personal life, if you are interested and open minded, i have some ideas for you that you may be interested in to make a hotswap installer actually work 100% for everyone....it would require the disc still, but you would save a lot of people headaches by getting the exploit file on, and you can tailor it to each region in one fell swoop.


Bravo and kudos for a noble attempt, and for recongnizing it had flaws, and being big enough to pull it down for the safety of all.

 

[xman954]

QUOTE

;;; Virtual EEPROM settings:
;;;
;;; VIRTUAL_EEPROM = Enable. Access to the EEPROM through the kernel will be
;;;                  redirected to file VIRTUAL_EEPROM_PATH.
;;;
;;; ENABLE_REAL_EEPROM_WRITE = Enable writing to the real EEPROM.
;;;                  If the VIRTUAL_EEPROM_PATH file is not found nkpatcher (with
;;;                  VIRTUAL_EEPROM enabled) will default to using the real EEPROM,
;;;                  but writing disabled. If you want the writing enabled then
;;;                  use this option. The main purpose of having real writes
;;;                  disabled by default is that if you mistype the path in
;;;                  VIRTUAL_EEPROM_PATH then you might go messing with the real
;;;                  EEPROM thinking it was only the virtual.
;;;
;;; DISABLE_VIRTUAL_EEPROM_WRITE = Disable writing to the virtual EEPROM.
;;;
;;; Virtual EEPROM is disabled by default. Also note that normally you shouldn't
;;; define ENABLE_REAL_EEPROM_WRITE.

%define VIRTUAL_EEPROM
%define VIRTUAL_EEPROM_PATH '\path_to_eeprom.bin'
;%define DISABLE_VIRTUAL_EEPROM_WRITE
;%define ENABLE_REAL_EEPROM_WRITE

for those that are having problems with the virtual eeprom
simply deleting the eeprom.bin that it uses (from Professional mode) will force NKPatcher to use the
real eeprom but with writes disabled.
then using the tray-boot to MS dash the HD and AUDIO settings
can be set and will persest in the modded state
the real eeprom will still be write protected

[Raam]

Hello!  I'm trying to use 1,0 and Splinter Cell to softmod my PAL Xbox, and the installation goes through fine, but it never boots up after I reset it.  I've done the fonts thing, and I think the thing is softmodded (the Xbox boots up a Xbox boot disc I burned) but still, the installation doesn't finish.  I don't know what's up.  I've re-installed a few times, installing Exo X and Unleash, but no luck.

Help me!  Ta.

[krayzie]

you could use the rescue disc to revert to stock and try again (using new saves)

[corpsegrinder.]

hmmmmmmmmm is the download in a torrent?

[doeman]

Hey guys, i just go on XBL 2 days ago using a legit unmodded Box. I transferred the XBL account via mem card over to my Ndure sofmodded box. I put Halo 2 (original) in the DVD Tray and cooldbooted...i assume green led indicated unmodded state. When i go to connect to XBL though, i get a message saying there is no connection or connection problem.

Any ideas? Thanks man.

[krayzie]

if you coldbooted you should be safe. probably some misconfiguration in your network settings.

[red_butcher]

Hi, I have the Krayzie Ndure 1.1.1 mod and update installed on my v1.0 xbox and it works great. I just have two questions.

(1) in order to swap my original HD out with say a 320GB HD, do I just use the "rescue disc" that comes zipped up in the original gamesave after I remove the old HD and put the new one in? or is there anything else that I will need to know?

(2) I installed the mod an my 1.0 xbox and it works great, but if I wanted to install it on the newest version xbox that is out would it still work ok?

Thanks, oh and by the way Krayzie, you are a genius

[red_butcher]

Sorry to double post but I dont know how to edit my post in this forum. I just wanted to clearify that I did ftp to my xbox and put my "C" drive and my "E" drive in the "rescue disc" folder, and I also put my default dashboard in the rescue disc dasboard folder just in case I would need to ftp from the "recovery disc". After doing so I than created the XISO and burnt it to a disc, and the "tri boot" loads it up perfectly. One other thing is that I went back and read some of the other posts and noteced that someone mentioned something about having to turn on professional mode to access the real "C" drive. Im pretty sure that when I ftped to "C" and backed it up that it had all of the original files in it, except for the for some of the "config magic" files (I was just curious about the program, dident use it) that where installed in the "C" drive which I could easily delete if I ever wanted to revert back to stock (not that I would ). All that I think that I realy need to know is if the "tri boot" is actualy flashed to the bios or if it is just another "back door" in case the "default dashboard" becomes corrupt, or if someone is stupid enough to delete it or something. Im just wanting to make sure 100% before I try anything, even though I know that you mentioned in your readme file that the "rescue disc" is good for setting up new HDs. One more thing, I wont need to unlock my HD or anything will I?

Anyway, I know that I probably sound like a big noob, but I did my homework. I just wanted to check from this site first.

Thanks.

Oh well what do you know, there is the edit bottun right there

[cerealkillajme]

QUOTE(red_butcher @ Jun 5 2007, 05:36 PM)

Hi, I have the Krayzie Ndure 1.1.1 mod and update installed on my v1.0 xbox and it works great. I just have two questions.

(1) in order to swap my original HD out with say a 320GB HD, do I just use the "rescue disc" that comes zipped up in the original gamesave after I remove the old HD and put the new one in? or is there anything else that I will need to know?

(2) I installed the mod an my 1.0 xbox and it works great, but if I wanted to install it on the newest version xbox that is out would it still work ok?

Thanks, oh and by the way Krayzie, you are a genius

1. You can't simply put a new HDD in and pop a disc in and format/prepare the drive. With a chip you could. Look into XBOXHDM for upgrading your HDD.

2. Krayzies softmod works on EVERY version XBOX.

[red_butcher]

Ok, thanks. I will look into XBOXHDM, and I Also backed up my "C" drive in professional mode finally.