Topic: Chameleon 1.3 On Xbox 1.6 (Read 131 times)

edwinmcdunlap · « **on:** March 15, 2005, 09:53:00 PM »

Could somebody please direct me to a guide for installing a Chameleon 1.3 on an Xbox v1.6?
(IMG:http://www.maj.com/gallery/Ykcab/Xbox/xbox_001__small.jpg)

deacon187 · « **Reply #1 on:** March 16, 2005, 12:06:00 AM »

i havent seen any install notes for this chip with a 1.6, but make sure you use a bios made for a 1.6, lots of bios' frag on 1.6, i know the M816 works, not sure if there are any others

edwinmcdunlap · « **Reply #2 on:** March 27, 2005, 07:41:00 PM »

Wow... after so long, only one reply

Neo2003 · « **Reply #3 on:** April 11, 2005, 08:15:00 PM »

You can install the Cham on the 1.6 only you will need to short the D0 from the MB to ground and not use the D0 on the chips it self ... bios M6-16 is good to have too

edwinmcdunlap · « **Reply #4 on:** April 12, 2005, 05:13:00 AM »

That's all I have to do different? I don't have to rebuild the LPC or anything?

Neo2003 · « **Reply #5 on:** April 12, 2005, 07:18:00 AM »

OK, with all 1.6 xbox. no matter which chip you install, you still need to do the LPC rebuild.

For Champ to works on 1.6, you will need:

- rebuild LCP
- flash the boot bank of the Champ with working M8_16 bios
- Ground the "D0/LFRAM" from the Motherboard to ground

that is all

edwinmcdunlap · « **Reply #6 on:** April 12, 2005, 04:41:00 PM »

QUOTE(Neo2003 @ Apr 12 2005, 07:18 AM)

OK, with all 1.6 xbox. no matter which chip you install, you still need to do the LPC rebuild.

For Champ to works on 1.6, you will need:

- rebuild LCP
- flash the boot bank of the Champ with working M8_16 bios
- Ground the "D0/LFRAM" from the Motherboard to ground

that is all

Does this bios support VGA?

Author Topic: Chameleon 1.3 On Xbox 1.6 (Read 131 times)