xboxscene.org forums

Pages: 1 ... 3 4 [5] 6 7 ... 16

Author Topic: Final Tut: Uxe Via Gamesave Ftp  (Read 673 times)

frieko

  • Archived User
  • Full Member
  • *
  • Posts: 115
Final Tut: Uxe Via Gamesave Ftp
« Reply #60 on: October 29, 2004, 06:51:00 PM »
QUOTE (BigSteel @ Oct 29 2004, 12:34 AM)
I keep hearing about the package that idots is releasing.  Am I correct that it is an autoinstaller for UXE, something similar to Slayers?

i wish. booting an installer cd (or any cd) on a virgin is the unachieved holy grail of modding. therefore idots is a gamesave. i believe as of this point idots uxe is in release candidate.

three options:

1) install uxe by hand with hotswap.

2) install idots by hotswap, and run idots with an exploitable game.

3) install idots by memcard, and run idots with an exploitable game.

#1 is cheapest, #3 is easiest. if you hotswap to a modded xbox, you can prolly do #1 by basically following my tut. ftp into the 'host' xbox.
Logged

g00ki3

  • Archived User
  • Newbie
  • *
  • Posts: 4
Final Tut: Uxe Via Gamesave Ftp
« Reply #61 on: October 30, 2004, 09:34:00 AM »
Okay, I got it all sorted, I'm running a softmodded 1.6 PAL now! I just bought it yesterday. Since I didnt have a mem card and the games, I had to do everything using xboxhdm (unlocking via hotswap). I used the update.xbe from slayers 2.6 then patched it before including to the boot cd. Thanks for this guide, it had all the fundamental steps.   wink.gif

pz
Logged

spectrum48k

  • Archived User
  • Newbie
  • *
  • Posts: 7
Final Tut: Uxe Via Gamesave Ftp
« Reply #62 on: October 31, 2004, 07:32:00 AM »
after checkin much tutorials on softmodding, and trying some with no good result, I found this one, and worked flawlessly!!!   biggrin.gif

I can't do however the last thing, which is getting the msdash patched.

When I run on command prompt the code pointet by the tutorial, it doesn't work, it just tells me cannot execute patcher.....

is there an alternative way to this?

thanks for this great tut!

k4817
d5960
Logged

frieko

  • Archived User
  • Full Member
  • *
  • Posts: 115
Final Tut: Uxe Via Gamesave Ftp
« Reply #63 on: October 31, 2004, 08:57:00 AM »
QUOTE (spectrum48k @ Oct 31 2004, 03:59 PM)
When I run on command prompt the code pointet by the tutorial, it doesn't work, it just tells me cannot execute patcher.....

is there an alternative way to this?

grab a hex editor, change all instances of

fonts [ 00 66 00 6f 00 6e 00 74 00 73 ]

to

f0nts [ 00 66 00 30 00 6e 00 74 00 73 ]
Logged

spectrum48k

  • Archived User
  • Newbie
  • *
  • Posts: 7
Final Tut: Uxe Via Gamesave Ftp
« Reply #64 on: November 02, 2004, 02:43:00 AM »
thanks much again Frieko biggrin.gif
Logged

embassy

  • Archived User
  • Newbie
  • *
  • Posts: 11
Final Tut: Uxe Via Gamesave Ftp
« Reply #65 on: November 02, 2004, 03:13:00 AM »
Will this tut work for me I have the crystal xbox v1.6 K:5838 Pal
Logged

gyb

  • Archived User
  • Newbie
  • *
  • Posts: 6
Final Tut: Uxe Via Gamesave Ftp
« Reply #66 on: November 02, 2004, 06:00:00 AM »
QUOTE (embassy @ Nov 2 2004, 12:16 PM)
Will this tut work for me I have the crystal xbox v1.6 K:5838 Pal

Yes, it will.  I bought a brand new PAL v1.6 K:5838 crystal XBox on Friday and installed a new hard drive using xboxhdm and then used this tutorial to softmod it.  Works like a dream.
Logged

embassy

  • Archived User
  • Newbie
  • *
  • Posts: 11
Final Tut: Uxe Via Gamesave Ftp
« Reply #67 on: November 02, 2004, 06:18:00 AM »
QUOTE (gyb @ Nov 2 2004, 02:27 PM)
Yes, it will.  I bought a brand new PAL v1.6 K:5838 crystal XBox on Friday and installed a new hard drive using xboxhdm and then used this tutorial to softmod it.  Works like a dream.

nice one

Logged

embassy

  • Archived User
  • Newbie
  • *
  • Posts: 11
Final Tut: Uxe Via Gamesave Ftp
« Reply #68 on: November 02, 2004, 08:50:00 AM »
I am gonna do the softmod tonight after work. Just to confirm all the steps in this guide are all that I need to do.
Logged

kensi

  • Archived User
  • Newbie
  • *
  • Posts: 5
Final Tut: Uxe Via Gamesave Ftp
« Reply #69 on: November 03, 2004, 05:43:00 AM »
I got one little question??? When i have made the new update.xbe from über patch. Its called xboxdash.xbe. Now i put it in the c: on the xbox... But what about the old update.xbe in c:/xodash/update.xbe... Shall i delete this one????????

Please help me..... smile.gif

My xbox is a 1.6 pal crystal edition...
Logged

embassy

  • Archived User
  • Newbie
  • *
  • Posts: 11
Final Tut: Uxe Via Gamesave Ftp
« Reply #70 on: November 03, 2004, 08:08:00 AM »
just do exactly what the tut says. If it says delte it then delete it if not dont.

I use the same tut last night and it worked for me.  tongue.gif
Logged

frieko

  • Archived User
  • Full Member
  • *
  • Posts: 115
Final Tut: Uxe Via Gamesave Ftp
« Reply #71 on: November 03, 2004, 08:09:00 AM »
QUOTE (kensi @ Nov 3 2004, 02:10 PM)
c:/xodash/update.xbe... Shall i delete this one????????

you can ignore it.
Logged

kensi

  • Archived User
  • Newbie
  • *
  • Posts: 5
Final Tut: Uxe Via Gamesave Ftp
« Reply #72 on: November 03, 2004, 08:21:00 AM »
Jiiiiiihaaaa!!!!!
It worked for me ....I just softmodded my 1.6 pal xbox...
Great tutorial... Respect to Frieko!  beerchug.gif

Where do i find idots patch  for the msdash.xbe?? I know the "usual place! but i can't seem to find it.... dry.gif

Logged

UGLYMONKEY

  • Archived User
  • Newbie
  • *
  • Posts: 44
Final Tut: Uxe Via Gamesave Ftp
« Reply #73 on: November 03, 2004, 07:49:00 AM »
NICE TUT and thanx i just modded a 1.6 Crystal (PAL) and it works fine!!!!! :-)

one more thing, what DVD drive is in the 1.6 Crystal because mine playin from cd-r no problems
Logged

frieko

  • Archived User
  • Full Member
  • *
  • Posts: 115
Final Tut: Uxe Via Gamesave Ftp
« Reply #74 on: November 03, 2004, 07:50:00 AM »
QUOTE (kensi @ Nov 3 2004, 04:48 PM)
Where do i find idots patch  for the msdash.xbe?? I know the "usual place! but i can't seem to find it.... dry.gif

/PC/xbe-xip-xbx tools/
Logged
Pages: 1 ... 3 4 [5] 6 7 ... 16
« previous next »