Print

[jbwrxsti]

ya does anybody know how to use telnet?

[noneed]

Thanks chimpanzee for a great program.  I have been cautious to upgrade a hdd for 2 years now because of horror stories of mislocking and zapped mobos, but read your post and tried your program with success.  I have a v1.1 running itools MA install and just upgraded to a 80g hdd I had lying around.  At first I used a Maxtor 40g and the process was smooth but it wasnt lockable and switched to the 80g but then then program would return to the command line screen when I try to lock and I had to keep rebooting.  But I rescaned Ide and then locked and voila.  Keep up the good work.

[jfoster1234]

this is such and easy tool to use. i couldn't use xboxhdm and i was really bummed that i got a mxtor 120 gb for it just to sit around. then i found this. took me a half an hour, most of which was just watching tv and checking on the progress of the clone. thank you!

[jfoster1234]

this needs to be pinned

[jfoster1234]

bump so people can find it without sifting through a bunch of other sh*t.

[ibnuts]

It won't let me edit above, so EDIT: I found a newer thread that has instructions.. I can telnet in now, although the password doesn't work (doesn't show up, but supposedly is entered.. I still get invalid password though)

[k87]

i have version 1.2
so is this all i do
-
first, unrar chimps tool. you will see a folder called UDATA. open it. now you will see a folder called 4d530017. open it. now open 62D648EBF155. take the contents of the folder and put it in udata. so in the udata folder there will be 4d530017 and a bunch of files including default.xbe.put the udata folder in your apps menu.


now, open the xbox.take a computer(not monitor or anything else needed) and plug it in next to your xbox. plug your computer's hd's power cable into the new hd. don't mess with it. now turn on your xbox. go to the apps folder on you'r dash. you will see the program.choose it. now, this is the part that seems scary, but it's not. unplug the ide cable from the dvd drive and plug it in to your new hd. turn on the computer, thus giving power to your new hd. now choose option 1 on the menu(you must do this first), it should tell you the specifications from your hd. make sure they're correct. now, the rest is up to you! have fun

[k87]

i have version 1.2
so is this all i do to add a 120gb hard drive
----
`First, unrar chimps tool. you will see a folder called UDATA. open it. now you will see a folder called 4d530017. open it. now open 62D648EBF155. take the contents of the folder and put it in udata. so in the udata folder there will be 4d530017 and a bunch of files including default.xbe.put the udata folder in your apps menu.
`Now, open the xbox.take a computer(not monitor or anything else needed) and plug it in next to your xbox. plug your computer's hd's power cable into the new hd. don't mess with it. now turn on your xbox. go to the apps folder on you'r dash. you will see the program.choose it. now, this is the part that seems scary, but it's not. unplug the ide cable from the dvd drive and plug it in to your new hd. turn on the computer, thus giving power to your new hd. now choose option 1 on the menu(you must do this first), it should tell you the specifications from your hd. make sure they're correct. now, the rest is up to you! have fun
--

Does the drive have to be lockable?
And how do you lock it once the above process is done?

[OliG]

You aint read much if your asking if the HD needs to be lockable......

Anyone have a real problem.

OliG

[Skippydzg]

I've seen this problem a lot, but can't seem to solve it...
I, too, have a v1.6 Xbox, and upon loading the Chimps program I get a garbled screen and then a completely green screen, along with an amber display light. I know that's all right so far, but from there I'm clueless. I've heard you have to telnet in...but I can't seem to do it. My Xbox's IP address is 192.168.1.103...it goes through a a router.

Now what I'm wondering is, is if I set my computer to oh say 192.168.0.2 and my xbox to a static 192.168.0.3, will I then be able to get through on the Telnet? What settings do I need to change? I'm simply trying to clone my ten gig into my new 60 gig, is all, and any help at all would be appreciated a lot!

[ibnuts]

I don't know if it matters if you set the xbox's gateway to your PC's IP address.  I did that once and it worked.  But otherwise, it's not that difficult to change your IP address.  Go into your router's settings and look for the part that says "enable DHCP" etc.  Usually it'll have some part about a "range".. Just set that from 192.168.0.0-192.168.0.255.  Then when the settings have updated, find out your computer's IP address (either by going to command, then type ipconfig or through your router software), then turn on the XBOX and use that IP address in the "gateway" field within the system settings.  Reboot the XBOX, then, even if it doesn't say 192.168.0.3 at the loading screen (or wherever it says on your particular dash and skin), I'm pretty sure you're supposed to log in using that ip address and user|password root/xbox.  Type in telnet 192.168.0.3; then when it says user, type "root," then password "xbox"  Should work.  At one point, user or pass I'm not sure as it's been a while, you can't see what you're typing in, but it's still working.. Look elsewhere on the tread for anything else.

EDIT: as far as setting up the router, if you need extra help, check out this site and look under the part that says "Setting up a Static IP" under your particular make/model of router.

Good luck!

[Skippydzg]

Ok, thanks to you guys I wa able to telnet into it. Still a a little garbled, but it was doable. However, from there, I didn't have much of a clue what to do, as there's no readme or anything on what to do from there. I hotswapped and scanned, I saw MNaxtor in the garbled mess somewhere so I'm assuming it recognized the new one. Then I tried Clone from master to slave, and it gaev me a mess, and a yes to continue. I just kept hitting enter O_o Cause I couldn't tell what was what. It eventually took me back to the begining screen. I thought I had hit no, but there's really no way to tell. So anyone want to tell me the steps AFTER you get into it?

[mynuffinfutsitch]

bump
XBOXSCENE NEEDS TO HOST THIS FILE!!!

[generiq1]

when i use this chimp cloner...do I want the receiving hard drive to be set to 'Cable Select'?

][Q][

[generiq1]

IT WORKED!

but wheres my other 20GB?  160 GB Drive, but only 144 showing on F:\

nothing on G:\

Im using UDE2:AUF w/ EvoX m8 + 3935 Dash...and I have G:\ enabled in the settings...

any suggestions?

][Q][