xboxscene.org forums

Pages: 1 ... 22 23 [24] 25

Author Topic: The “ultimate Dashboard Exploit 2” Aka Ude2  (Read 2380 times)

ccb_v2

  • Archived User
  • Newbie
  • *
  • Posts: 6
The “ultimate Dashboard Exploit 2” Aka Ude2
« Reply #345 on: November 18, 2004, 05:16:00 AM »
I've been searching but have found nothing.  Is there a way to have UDE2 and also have the option to boot the orig. dash in Evox menu?
Logged

leecasey

  • Archived User
  • Newbie
  • *
  • Posts: 20
The “ultimate Dashboard Exploit 2” Aka Ude2
« Reply #346 on: November 18, 2004, 05:49:00 AM »
QUOTE (Porkchop Sandwhiche @ Oct 30 2004, 08:44 PM)
I have a question just to make sure. I noticed in the package that there is no default.xbe included, and the xbox can't, ya know, boot without the default.xbe. I could just be mistaken, and am not exactly sure how it works. But, I want to make sure this works 100%. So I delete every file and folder and everything in the xbox C drive, and just place the contents from the C folder in the package to the C drive on the xbox, even though there more files on your xbox than there are in the package? If I am mistaken, could someone please explain to me exactly what each file in the package does? because there a lot of generally necessary files missing in the package, and I don't want to screw anything up, so help would be very appreciated, thanks

Yeah i know it seems a litlte worrying replacing all them files with one xbe and a fonts folder!  laugh.gif  but it really works!

read my post here for more detail!
http://forums.xbox-s...howtopic=305166
Logged

leecasey

  • Archived User
  • Newbie
  • *
  • Posts: 20
The “ultimate Dashboard Exploit 2” Aka Ude2
« Reply #347 on: November 18, 2004, 05:52:00 AM »
QUOTE (ccb_v2 @ Nov 18 2004, 02:19 PM)
I've been searching but have found nothing.  Is there a way to have UDE2 and also have the option to boot the orig. dash in Evox menu?

I _THINK_ this is how you do it....

drag over your origianl xbe file msdash (prob have to rename it to that) make a new fonts folder called f0nts or something and put the original fonts in there. You then have to patch your msdash so it looks in the f0nts folder for the original fonts. I believe there is a fonts patcher in the usual places which does this.

If you look at friekos tutorial and the last few steps it shows exactly how to do this....

good luck

oh forgot to mention, then you just edit your evox.ini and add an item to launch the msdash
Logged

ccb_v2

  • Archived User
  • Newbie
  • *
  • Posts: 6
The “ultimate Dashboard Exploit 2” Aka Ude2
« Reply #348 on: November 18, 2004, 07:41:00 AM »
QUOTE (leecasey @ Nov 18 2004, 02:55 PM)
I _THINK_ this is how you do it....

drag over your origianl xbe file msdash (prob have to rename it to that) make a new fonts folder called f0nts or something and put the original fonts in there. You then have to patch your msdash so it looks in the f0nts folder for the original fonts. I believe there is a fonts patcher in the usual places which does this.

If you look at friekos tutorial and the last few steps it shows exactly how to do this....

good luck

oh forgot to mention, then you just edit your evox.ini and add an item to launch the msdash

Exellent, thanks... I had everything except copying fonts to a custom DIR and patching the msxboxdash.xbe, thanks!

biggrin.gif
Logged

devz3ro

  • Archived User
  • Full Member
  • *
  • Posts: 229
The “ultimate Dashboard Exploit 2” Aka Ude2
« Reply #349 on: November 18, 2004, 07:46:00 AM »
QUOTE (wafflezone @ Oct 26 2004, 12:12 AM)
I recently started using this package but I'm interested in using PBL metoo instead of nkpatcher. Can anybody help me install it? I want it for IGR as well as blocking xbox live.

I included the nkpatcher7, read rmenhals root post, he added basically almost all the bios hacks including IGR and live blocking.

-devz3ro
Logged

DaddyJ

  • Archived User
  • Hero Member
  • *
  • Posts: 1324
The “ultimate Dashboard Exploit 2” Aka Ude2
« Reply #350 on: December 17, 2004, 12:14:00 PM »
QUOTE (joshwild @ Dec 16 2004, 04:18 PM)
I used to file ude2 71, erased drive c pasted the new files in, everything works fine, loads evolution x, just wanted to know how to make the xbox load avalaunch when it boots up, insted of evolutionx, thanks

replace the evox.xbe & its required files with the avalaunch.xbe & its required files.
Logged

DaddyJ

  • Archived User
  • Hero Member
  • *
  • Posts: 1324
The “ultimate Dashboard Exploit 2” Aka Ude2
« Reply #351 on: December 18, 2004, 09:41:00 AM »
rename the avalaunch.xbe to ex.xbe

If you have your XboxHDM restore cd , then it wont matter what the xbox does or doesnt do.

Logged

xtermz

  • Archived User
  • Newbie
  • *
  • Posts: 3
The “ultimate Dashboard Exploit 2” Aka Ude2
« Reply #352 on: December 18, 2004, 11:51:00 PM »
Hi all...I downloaded the UDE2 Package so I can install it on the xbox (It's from the holiday bundle so I presume it's 1.6b). How exactly do I extract the files from the BZIP2 archive? I try opening it up with my winrar and try extracting it but it doesn't (it can't do it basically). The file name is ude2-complete-v0.1.bzip2 AND IT WAS RELEASED December 18 JUST YESTERDAY (I think we all know where it was released). After I do that, from what I've read so far I just have to erase the C drive and replace all the files from the archive into C (for the xbox). What I don't get is, how does that load up EVOX? There is a seperate file called Evox Official with all the skins, evox.ini, etc. do I have to install that or something? If so how do I install it?
Logged

xtermz

  • Archived User
  • Newbie
  • *
  • Posts: 3
The “ultimate Dashboard Exploit 2” Aka Ude2
« Reply #353 on: December 19, 2004, 12:26:00 AM »
Hi all...I downloaded the UDE2 Package so I can install it on the xbox (It's from the holiday bundle so I presume it's 1.6b). How exactly do I extract the files from the BZIP2 archive? I try opening it up with my winrar and try extracting it but it doesn't (it can't do it basically). The file name is ude2-complete-v0.1.bzip2 AND IT WAS RELEASED December 18 JUST YESTERDAY (I think we all know where it was released). After I do that, from what I've read so far I just have to erase the C drive and replace all the files from the archive into C (for the xbox). What I don't get is, how does that load up EVOX? There is a seperate file called Evox Official with all the skins, evox.ini, etc. do I have to install that or something? If so how do I install it?

I ALSO HAVE THE REGULAR UDE2 PACKAGE BEFORE DECEMBER 18 RELEASE but I still have the exact same questions....except I already have the regular UDE2 package extracted since it was a zip file and NOT bzip2.
Logged

janeniedereen

  • Archived User
  • Newbie
  • *
  • Posts: 1
The “ultimate Dashboard Exploit 2” Aka Ude2
« Reply #354 on: December 28, 2004, 04:36:00 PM »
Hi,

I'm trying to sign config magic with xbedump but it gives a error everytime:

C:\.............\ConfigMagic-XBOX-1.6-FINAL>xbedump default.xbe -habibi

XBE Dumper 0.5-BETA Release
Using Habibi Keys
Magic XBEH value:      pass
Header Size:           fail
Image Base Address:    pass
Certificate Adress:    pass
Certificate Size  :    pass
Correcting Mediatypes and Regions
Section Address:       pass
Debug Address:         pass
Patch XOR Keys
Kernel Entry:          3C7A57DE  (KEY: A8FC57AB)
Kernel Thunk Table:    B4C58FC4  (KEY: 5B6D40B6)
Section:  0 Hash:      pass -> corrected
Section:  1 Hash:      pass -> corrected
Section:  2 Hash:      pass -> corrected
Section:  3 Hash:      pass -> corrected
Section:  4 Hash:      pass -> corrected
Section:  5 Hash:      pass -> corrected
Section:  6 Hash:      pass -> corrected
Section:  7 Hash:      pass -> corrected
Section:  8 Hash:      pass -> corrected
Section:  9 Hash:      pass -> corrected
Section: 10 Hash:      pass -> corrected
Correcting Signature:
2048 RSA Signature:    pass

 File out.xbe created, verifying it ...

Magic XBEH value:      pass
Header Size:           fail
Image Base Address:    pass
Certificate Adress:    pass
Certificate Size  :    pass
Section Address:       pass
Debug Address:         pass
Kernel Entry:          3C7A57DE  (KEY: A8FC57AB)
Kernel Thunk Table:    B4C58FC4  (KEY: 5B6D40B6)
Section:  0 Hash:      pass
Section:  1 Hash:      pass
Section:  2 Hash:      pass
Section:  3 Hash:      pass
Section:  4 Hash:      pass
Section:  5 Hash:      pass
Section:  6 Hash:      pass
Section:  7 Hash:      pass
Section:  8 Hash:      pass
Section:  9 Hash:      pass
Section: 10 Hash:      pass
2048 RSA Signature:    pass

XBE file integrity:    FALSE !!!!!!! FALSE !!!!!


C:\.............\ConfigMagic-XBOX-1.6-FINAL>

Does anyone know why?
Or can anyone send me the patched file of that release?

THanks!
Logged

stevenho78

  • Archived User
  • Newbie
  • *
  • Posts: 8
The “ultimate Dashboard Exploit 2” Aka Ude2
« Reply #355 on: January 12, 2005, 01:25:00 PM »
Hi all.  I just bought a soft modded XBox from HK, it appears to be a NTSC-J version and was told it is a 1.6 version.
What I am trying to figure out is whether it has been modded with UDE2.  From what I read in the forums, for UDE2, the EEPROM must have been changed to region 1.  I have the following questions:

1. Where is the EEPROM located?  What will happen if I change the f0nts folder back to fonts and replace xboxdash.xbe with orig-xboxdash.xbe?  Will the XBox boot up like an un-modded NTSC (not NTSC-J) box?

2. What is the startup sequence for the XBox?  At what point is the new bios loaded?  I assume a new BIOS must be loaded otherwise I wouldn't be able to play backups.  The reason I am asking is that I assumed that on power on, the XBox would look for an original DVD in the drive before booting to the dash, however if I have an original DVD (tried Japan and UK game), it still loaded to EvoX dash.

3. How is the BIOS loaded, is it called before or after EvoX?  How do I find out what BIOS is used?  There is a apps/BiosLD directory on my E drive with PBL Meetoo, but that doesn't seem to be loaded normally as nothing changes when I changed the boot.cfg.

4. If I wanted to upgrade the hard disk, is the procedure the same as if there was a modchip installed?  Or is there anything special that needs to be done?

5. What are the different regions for the XBOX?  The machine was bought from HK and I was told it is a HK release, but marked NTSC-J, is this the same as a japanese box?

Thanks, much appreciated.

Steve
Logged

PedrosPad

  • Archived User
  • Hero Member
  • *
  • Posts: 1277
The “ultimate Dashboard Exploit 2” Aka Ude2
« Reply #356 on: January 12, 2005, 02:24:00 PM »
QUOTE(stevenho78 @ Jan 12 2005, 09:56 PM)
2. What is the startup sequence for the XBox?  At what point is the new bios loaded?  I assume a new BIOS must be loaded otherwise I wouldn't be able to play backups.  The reason I am asking is that I assumed that on power on, the XBox would look for an original DVD in the drive before booting to the dash, however if I have an original DVD (tried Japan and UK game), it still loaded to EvoX dash.
Logged

PedrosPad

  • Archived User
  • Hero Member
  • *
  • Posts: 1277
The “ultimate Dashboard Exploit 2” Aka Ude2
« Reply #357 on: January 26, 2005, 02:07:00 PM »
QUOTE(astyxnax @ Jan 26 2005, 07:45 PM)
are these files here for download or am i just missing something
Logged

Stopper

  • Archived User
  • Newbie
  • *
  • Posts: 1
The “ultimate Dashboard Exploit 2” Aka Ude2
« Reply #358 on: March 21, 2005, 03:36:00 PM »
i just got the xbox i dont know what i need to install this exploit....and i whant to read copies and all dvds on my xbox...please help me.....
Logged

PedrosPad

  • Archived User
  • Hero Member
  • *
  • Posts: 1277
The “ultimate Dashboard Exploit 2” Aka Ude2
« Reply #359 on: March 22, 2005, 02:35:00 AM »
QUOTE(Stopper @ Mar 21 2005, 10:42 PM)
i just got the xbox i dont know what i need to install this exploit....and i whant to read copies and all dvds on my xbox...please help me.....
Logged
Pages: 1 ... 22 23 [24] 25
« previous next »