Topic: What Went Wrong ? (Read 285 times)

mkjones · « **on:** March 31, 2004, 05:08:00 AM »

When using Audio you should try Mordens installer it does all this for you and works great!

Grospolina · « **Reply #1 on:** March 31, 2004, 05:30:00 AM »

The audio hack always loads the MS dash. You have to enter the button sequence to get it to boot.

Also, check which ST.DB file you have. Different versions load E:\linux.xbe, E:\linux.x, E:\exploit, or E:\pbl\p. There isn't any that I know of that loads E:\default.xbe (but it could easily be edited to). The easiest way is to open it up in a hex editor to check. It will say something like d:\linux.xbe, but it actually loads from E: (by remapping drive D:).

holydude · « **Reply #2 on:** March 31, 2004, 05:49:00 AM »

No, what I mean is that , when I enter the button combo, it boots to MSDASH, like it "restarts" to MS. I'm using the St.db version which comes in your Signature(where you point out the steps to get the st.db from the code chunk posted)

mkjones · « **Reply #3 on:** March 31, 2004, 05:58:00 AM »

krayzie · « **Reply #4 on:** March 31, 2004, 06:54:00 AM »

did you add evox.ini along with exploit in the E: directory? You probably did but just want to make sure.

holydude · « **Reply #5 on:** March 31, 2004, 07:07:00 AM »

I did try one thing to narrow down the problem. I tried the audio hack with ST.db but without the exploit in the E: . What happened is that it gave me an error 21(duh, because its unable to find the file to run) but when i put in exploit, and all the sub folders of evox, it loads to MSdash so obviously the problem lies in the exploit part.

Kolk1604 · « **Reply #6 on:** March 31, 2004, 07:13:00 AM »

Kolk1604 · « **Reply #7 on:** March 31, 2004, 07:24:00 AM »

Maybe exploit needs .xbe at the end...

krayzie · « **Reply #8 on:** March 31, 2004, 07:30:00 AM »

no it's suposed to work just the way it is. I worked fine with me and many others. Dunno where the problem is.

Grospolina · « **Reply #9 on:** March 31, 2004, 09:19:00 AM »

Okay, then E:\exploit seems to be the right name.

The only thing I can think of is that either EvoX is corrupted, or it's jumping to the MS dash for some reason. For instance, it may think your clock is not set. Try setting your clock. Also, maybe you should edit your evox.ini to set "JumpToMsDash = No" and "JumpIfNoLink = No" (under [Clock]).

And yes, you can run homebrew apps from the HD with a TSOP flash. You'll also be able to launch the dash directly (EvoX in your case) without the need for exploits or PBL. You can still use PBL if you want to load another BIOS, but there really isn't a need for that. However, you definitely wouldn't be able to go on Xbox Live.

holydude · « **Reply #10 on:** March 31, 2004, 09:37:00 PM »

ok signed default.xbe of the evoxdash with habibi. Didn't work. Set the clock stuff to no. Didn't work. Renmaed exploit to linux.xbe didn't work. Got new evox dash from xbins. Didn't work.Guess I'm screwed. Anybody every suffered from this ?

What do I do now? I knnow the only way out is to get a modchip or do a TSOP flash(which i hope to do this weekend) but I don't know how to run homebrew code from a TSOP flash, and how to load it in evox. ANybody ? Direct me to a few tutorials if you know something. Thx.

Grospolina · « **Reply #11 on:** April 01, 2004, 12:53:00 PM »

By the looks of your posts in the TSOP Flashing forum, you've already gone and done it.

holydude · « **Reply #12 on:** April 02, 2004, 12:27:00 AM »

lol yeah, thanks for the help. I made a new post there. Help me again please . THx.

Author Topic: What Went Wrong ? (Read 285 times)