Topic: Have A Question. (Read 36 times)

JBNinja99 · « **on:** February 18, 2004, 05:34:00 PM »

yes you can change it to mxm. check the mxm thread about how to go from evox to mxm. pretty easy to do.

Angerwound · « **Reply #1 on:** February 18, 2004, 06:08:00 PM »

Yes, it's very simple just make sure your MXM .xbe is called default.xbe... Some people forget the simplest things, get error 21's and freak out.

Angerwound · « **Reply #2 on:** February 18, 2004, 06:14:00 PM »

You don't HAVE to delete the mxm files you could rename them and use MXM to boot evox if you ever would like - evox does have it's advantages sometimes. IE. Trainers - Just please double check everything before you reboot your box so you don't get that cursed error 21.

Angerwound · « **Reply #3 on:** February 18, 2004, 06:20:00 PM »

Yes you could also do this - actually i would suggest it if you already have evox running just fine.

Angerwound · « **Reply #4 on:** February 18, 2004, 06:27:00 PM »

THis should help you out.
http://forums.xbox-s...howtopic=175152

Angerwound · « **Reply #5 on:** February 18, 2004, 06:55:00 PM »

are you running it from your HD/Backup/ or original?

Angerwound · « **Reply #6 on:** February 18, 2004, 07:20:00 PM »

To tell you the truth I have never even played THUG and if you haven't had trouble with gamesaves on any other game it has to be an issue with this title - try d/l a gamesave for thug off of the internet - throw it on your box and then load that one - see what happens...

Angerwound · « **Reply #7 on:** February 18, 2004, 07:26:00 PM »

I tried to do this one you told me on the ms dash board...

If you mean you tried to do follow the instructions under the link i posted - well then - did you follow the tutorial or what - need some more info to help you out...

Angerwound · « **Reply #8 on:** February 18, 2004, 07:34:00 PM »

Try using the xtf2xft.rar file that was posted by a fellow member - never used it but may be easier than manually hex editing the files - if you plan to just hex edit then change your original font files to xbox.xft and xbox book.xft - then open your msxboxdash.xbe in the editor - search for the .xft string - it should be found twice - replace ( on the right side ) where it says "xtf" to "xft" at each find. once again there should only be two if i remember correctly. save your files. and then try and load it through evox. lemme know how it goes

Angerwound · « **Reply #9 on:** February 18, 2004, 07:41:00 PM »

Ewww... That patcher must not work too well. Like I said I am unsure for I have never used it. Now as for the Error 13 - Your box won't even boot to your evox anymore? - Well then your going to have to Hotswap your HD under xlinux and repair your files. I feel for you right now man, I have had many Error screens in the past - just don't let them scare you - there is always a way to fix them - this is why I always use the audio exploit - much safer for you can always boot back to the ms dash

Angerwound · « **Reply #10 on:** February 18, 2004, 07:45:00 PM »

No, the only use for HDDriver is to load or make a backup of a HD.

also, you don't need an actual linux box - hop on IRC and ask around for XLinux - its an .ISO you can burn to a cd and boot from your pc before windoze. then follow a hotswap tutorial of your choice there are many out there - good luck this will most likely be my last post of the night - I will check back tomarrow to see how your doin.

lordradium · « **Reply #11 on:** February 19, 2004, 01:27:00 AM »

NOTE: if you get an error starting the xbox (caused by the wrong xboxdash.xbe), before you hotswap the HDD, try booting your console with an original exploitable game (you need a memory card cointaining the hacked savegame too) and load evox with gamesave exploit... it could work...

Angerwound · « **Reply #12 on:** February 19, 2004, 09:52:00 AM »

Thanks radium for explaining this step by step. I forgot to tell him not to save over his original ms.xbe

Author Topic: Have A Question. (Read 36 times)