Topic: Hacking Your 1.4/1.5 With Hotswap Technique (Read 545 times)

Neo_Da_One · « **Reply #30 on:** December 01, 2003, 01:32:00 PM »

wooooooot !!!!!!
thnx pal u saved my customers xbox (was trying to tsop it but the bloody points just wouldnt work) was my first 1.5

and it worked i really dont mind getting the scrambeled phoenix loading screen at all !!!!

Neo_Da_One · « **Reply #31 on:** December 01, 2003, 01:40:00 PM »

admins plz pin this topic could be really helpfull for sumone who cant mod his 1.4/1.5 with an audio exploit... its simple and works like a charm !!

[Rdrm] · « **Reply #32 on:** December 02, 2003, 05:19:00 AM »

no problem m8.. I Had some though job for getting my own xbox exploited too hehe

But next time it could be better to edit your post's

Could save up alot of space

Mordenkainen · « **Reply #33 on:** December 02, 2003, 06:52:00 AM »

Don't know why you couldn't mod with the audio. There are very few boxes that won't work now.

AFAIK just some of the "beast pack" ones.

Morden.

ryls · « **Reply #34 on:** December 02, 2003, 09:48:00 AM »

Well i can get pheonix to load np how do i get evo to load though? sorry for the newb question but im a total newb and thought i did pretty good gettin as far as i did

This post has been edited by ryls: Dec 2 2003, 07:45 PM

Neo_Da_One · « **Reply #35 on:** December 02, 2003, 12:19:00 PM »

!--QuoteBegin-Mordenkainen+Dec 2 2003, 04:16 PM-->

QUOTE (Mordenkainen @ Dec 2 2003, 04:16 PM)

There are very few boxes that won't work now.

AFAIK just some of the "beast pack" ones.

Morden.

y is that

r those newer versions or what ?? like isnt that the one with a dvd kit and everything ? just hope inever get that from my customers

hehehe

DrPsyber · « **Reply #36 on:** December 03, 2003, 01:26:00 AM »

Man, your Harddrive swapping technique is way overcomplicated.

Easiest way to swap a HD:
1. turn xbox on with original HD still attached.
2. Unplug IDE cable from HD.
3. Plug PC IDE cable in.
4. Turn on the PC.

That's it, no waiting 10 minutes until drive spins down (although I would suggest you wait until the dashboard fully loads) and no Pause/Break key mashing.

I've done it this way on many XBOX's from v1.0 to v1.5 and have never had any damage to the Harddrive.

As for everything else, looks good... Now it's time to upgrade that original XBOX Harddrive.

ryls · « **Reply #37 on:** December 03, 2003, 07:30:00 PM »

Okay i followed these directions to a T and im still having problems. I boot up do the button combo get pheonix to load up and when it loads there is no scrambling at all of the picture. I then get a bunch of text ( i dont hit a to skip) saying all that stuff about r4 key etc and then it detects my console as a 1.1. Now i know its not a 1.1 as it is a new combo system just bought. Anyways theres a bunch more text about patching blah and then it hangs and does nothing. If i do hit a to goto menu i get a pheonix screen with xbox.bin in the centre i hit a and i get the same black screen. Any help would be greatly appreciated

Also i forgot to mention when its loading it says its loadin p:bioses/xbin.xbe is this normal? cause the P: drive is throwing me off.

This post has been edited by ryls: Dec 4 2003, 04:13 AM

ryls · « **Reply #38 on:** December 03, 2003, 08:36:00 PM »

Hmm a little confuse here now .... it seems upon future digging i have a refurbished 1.3 .... but even with that little bit of knowledge shouldnt this work? Also how can i tell if its got xbox live 2.0 and not live 1.0 ?

Thanks again in advance

street_kings · « **Reply #39 on:** December 03, 2003, 10:37:00 PM »

I may be a complete idiot, running on very little sleep so this may be common sense. anyway, how do you make folders using HDD_Driver? I used fat-x-plorer to add the DIRs but hdd driver cant read em. help?

Edit: I also cant seem to get this to work. phoenix loader boots up, but then sits there on a scrambled black screen. i can't read anything, really, except something about p:/bioses/xboxrom.bin

This post has been edited by street_kings: Dec 4 2003, 07:32 AM

debob · « **Reply #40 on:** December 04, 2003, 05:53:00 AM »

QUOTE

Also i forgot to mention when its loading it says its loadin p:bioses/xbin.xbe is this normal? cause the P: drive is throwing me off.

this happened to me, the files got corrupted when i transfered them to my mem card, i just recopied the files and it worked, i dunno how you got the files on your hd, but try and copy them back over and make sure they're all there and in the right place

QUOTE

Also how can i tell if its got xbox live 2.0 and not live 1.0 ?

if you had live 2.0, you wouldn't be able to run pbl at all with the audio exploit

tlippy · « **Reply #41 on:** December 04, 2003, 07:13:00 PM »

I am having the same trouble, scrambled screens on loading phoenix, then a mention of a P: drive which doesnt exist and it lockes up and is still scrambled. I have a brand new XBOX, and am using the 007 exploit to FTP in to the HD to copy the files, so I know they have transferred well. I have a brand new XBOX holiday pack I just got, never expected this much trouble with it, had no problem with the 5 other boxes I've done. Any ideas how to make this one go?

Darchon · « **Reply #42 on:** December 13, 2003, 02:32:00 AM »

EDIT: I do not have an backup from before the update. I have guessed that the 4920 tells that it wont work.. is there a way to downgrade to 4817. or have i totaly missunderstood the problem..?

Do you have any suggestions on what to do... I do not want XBL...
I want to flash my tsop.

street_kings · « **Reply #43 on:** December 13, 2003, 02:49:00 PM »

Odd, I am also using K:1.00.5101.01 D:1.00.4920.01, and my exploit works fine. try loading without a CD in, and instead of B-Down-A-Right-Right-A-A-A, do A-down-a-down-right-right-a-a-a. SLOWLY.

nadnerb · « **Reply #44 on:** December 14, 2003, 08:40:00 PM »

once you have evox loaded, is it possible to flash the tsop (with evox) ??

Author Topic: Hacking Your 1.4/1.5 With Hotswap Technique (Read 545 times)